Generators

There are 8 different 14-bit D/A resolution Arbitrary Waveform Generator cards in the UF2-6000 range. Cards are available offering 2 or 4 synchrononous output channels and choice of maximum DAC sampling rates. The UF2 cards are used as lower cost, more flexible and deeper memory alternatives to standalone AWG instruments. The fast PCI-X bus gi ...more

The Valid8 H.323 Traffic Generator allows you to test H.323 Gateways, generating calls between emulated H.323 clients. The package also includes protocol analysis enabling the user to capture the signaling messages that make up the call flow. ...more

The UX6110 is a 2 channel 8-bit Arbitrary Waveform Generator PXI card with a maximum output rate of 125 MHz on each channel. Each channel can be independently set for offset, amplitude or filter. With up to 128 MB onboard memory (64 MSamples), even the fastest signals can be generated for a long time. At slower speeds, the FIFO mode can be use ...more

The Valid8 SIP Traffic Generator allows you to test SIP Servers, generating calls between emulated SIP User Agent clients. The package also includes protocol analysis enabling the user to capture the signaling messages that make up the call flow. ...more

There are four 14-bit Arbitrary Waveform Generator PXI cards in the UX.6000 range. The cards are available with 1 or 2 output channels and either 20 MS/s, 60 MS/s or 125 MS/s maximum channel output rates. Each channel can be independently set for offset, amplitude or filter. A Bank-Switch mode is provided that allows the generated signal to be ...more

There are 8 different 14-bit Arbitrary Waveform Generator cPCI 6U size cards in the UC.6000 range. The cards are available with 1, 2 or 4 output channels and either 20 MS/s, 60 MS/s or 125 MS/s maximum channel output rates. Each channel can be independently set for offset, amplitude or filter. A Bank-Switch mode is provided that allows the gen ...more

The UF7005 has been designed with a unique memory saving mode for applications that require less that 16 channels. All other boards from different manufacturers use from 16 to 32 memory bits for each sample, regardless of the number of active channels. This means if you are only using one channel then the amount of memory allocated to each sam ...more

The V370 is a versatile VME four-channel arbitrary waveform generator. The module architecture was designed in cooperation with major aircraft engine and power systems manufacturers to provide the features needed for accurate simulation of real-world sensor inputs. ...more

The Signal Forge 2500M Frequency Expansion Module is a frequency multiplier source that add-on to the Signal Forge 1000 Signal Generator. It provides an RF (AC-coupled) output in the frequency band of 1.5 GHz to 2.6 GHz. FEATURES RF output: 1.5 GHz to 2.6 GHz. Output power range of ?11 dBm to +7 dBm. 1 Hz resolution. Low close-in phase noise. ...more

Portable signal generator with 1 GHz frequency range. Signal source provides digital and RF frequency output up to 1 GHz (expandable to 2.6 GHz with add-on module). The Signal Forge 1000 combines the a 1 GHz frequency range and a wide range of waveform modulation features--AM, ASK, BPSK, Chirp, FSK, OOK, ARB--making it ideal for testing clock dr ...more

The Model NS-3 RF noise generater is full of features that make this signal source perfect for bench, field, and ATE test applications. The NS-3 generates a flat AWGN noise signal from 5 MHz to 2.15 GHz that is ideal for digital signal simulation, carrier to noise testing, interface testing and more. ...more

QuadTech’s 31000A Programmable AC Power Source Series features a built-in transient generator for power line disturbance simulation wave form synthesis. With power to 4kVA, up to 40 orders can be entered for both magnitude and phase to create a variety of waveforms. Harmonic functions allow measurement of THD, DC & fundamental values of the voltage ...more

QuadTech’s 33000 Programmable AC Power Source Series has a power supply that delivers 5-wye, 3-phase AC power from 500VA - 4000VA per phase. An optional transient generator provides waveform synthesis. Up to 40 orders of harmonics can be entered for both magnitude and phase to create a variety of waveforms. The 33000 Series of Programmable AC powe ...more

Sine, square, triangle plus TTL output. Less than 1% Sinewave Distortion. 0.2Hz - 200kHz. Variable DC Offset. Sweepable 100:1 with ±10 volts input. 1mV-10V Level Output. Two separate outputs- one variable, one fixed TTL level ...more

The Signal Forge 1800M Frequency Expansion Module is a frequency multiplier source that add-on to the Signal Forge 1000 Signal Generator. It provides an RF (AC-coupled) output in the frequency band of 1.0 GHz to 1.8 GHz. FEATURES: RF output: 1.0 GHz to 1.8 GHz. Output power range of ?11 dBm to +7 dBm. 1 Hz resolution. Low close-in phase noise. ...more

Sine wave and Quadrature oscillators with low distortion from 100 Hz to 100 kHz. ...more

The PC-2 is a compact, temperature-stable two RF-carrier source. It is designed to be used for activating and testing the return-band. When used with a signal level meter, the PC-2 assists in measuring insertion loss of cable, amplifiers, splitters, and taps using the stimulus-response method.  ...more

The Model 4001 Ultravariable Pulse Generator is uniquely designed to permit precise tailoring of pulse repetition rates and duty cycles over a wide range through the independent setting of pulse width and pulse spacing. Both pulse width and pulse spacing are continuously variable over seven decade ranges from 100ns to 1s, with outputs from 0.5Hz to ...more

The ACE 5400 portable RF signal generator has four carriers that can be activated individually or in any combination. Each frequency and amplitude is adjustable by the user. The ACE 5400's basic and straight forward performance is perfect for applications that require a precise, stable RF stimulus. Applications: Testing and aligning CATV retur ...more

The Global Specialties Model 9004 is a unique 4-instrument-in-1 Test Station. The 9004 combines an RF Generator, Frequency counter, Function Generator and DC Power Supply into one bench-space-saving instrument. Global combined all of these features without compromising each individual instrument's operational integrity. The RF generator has an outp ...more

This new pulse generator, model 4010 (part number 105-4010) offers low rise/fall time pulse signals at high rep rate of up to 10MHz to meet today?s higher frequency test and measurement applications. ...more

The Model NS-1 is a handheld broadband noise generator. It generates a wide, even, RF noise-signal. The NS-1 is popular for testing network components and aligning a building's coaxial cable network. The NS-1's noise-signal is also used to provide the RF source for measuring insertion loss of cable, splitters, taps and more. ...more

The Global Specialties GSA-3736 Advanced Function Generator Kit provides reliable interconnection for RF testing. Kit is comprised of high quality compenets with gold plated contacts and comes in a convenient storage pouch. ...more

The SF1010 is a small, portable signal generator with a 1 GHz frequency range and support for the SCPI programming interface. SCPI support makes the SF1010 ideal for applications in which the signal generator needs to be controlled by a user-developed program or integrated with an automated test environment (ATE) such as LabView©, LabWindows/CVI or ...more

QuadTech’s 31120A/31180A Programmable AC Power Source delivers single and 3-phase AC power supplies up to 90KVA. The 31120A/31180A Programmable AC Power Source is ideal for commercial, medical, avionics and military applications requiring single and three phase product testing. The 31120A and 311800A feature an additional transient generator for w ...more