CATV Test

A great tool for professionals in the cable TV industry as well as in the telecommunication. It is a value packed service tool for signals up to 1.05GHz. An optional near field sniffer probe set (PR 261) can be used to locate cable and PC board emission "hot spots" and evaluate EMC problems at the breadboard and prototype level. The spectrum analyz ...more

The Model 1685 is a headend/hubsite RF eight-carrier generator. Each CW carrier can be activated individually or simultaneously. The RF carriers generated are extremely clean and stable, thus making the 1685 an ideal instrument for testing/aligning the CATV forward band. ...more

The MDU Signal Level Meter measures digital and analog signals up to 2.15 GHz. It was designed for DBS, MMDS, SMATV, and CATV applications. Straightforward layout makes the MDU the industry's most user-friendly digital measuring SLM. Rugged construction and strong batteries also differentiate the MDU from other meters. The compact weather resi ...more

The ACE 5400 portable RF signal generator has four carriers that can be activated individually or in any combination. Each frequency and amplitude is adjustable by the user. The ACE 5400's basic and straight forward performance is perfect for applications that require a precise, stable RF stimulus. Applications: Testing and aligning CATV retur ...more

Enable a single technician to perform return band alignment with this easy to use return band alignment system for CATV. This system consists of a headend signal level receiver/telemetry transmitter (the HECTER 6103) and a small, field portable, dual-carrier signal generator/telemetry receiver unit (HECTER'S PUP 6106). ...more

The RFSD-2 RF signal monitor measures the amplitude of analog or digital RF signals at two frequencies. Measurements are compared with programmable limits. Alarms may be indicated locally or remotely. RF switch actions may be initiated. ...more

The PC-2 is a compact, temperature-stable two RF-carrier source. It is designed to be used for activating and testing the return-band. When used with a signal level meter, the PC-2 assists in measuring insertion loss of cable, amplifiers, splitters, and taps using the stimulus-response method.  ...more

CableIQ is the first qualification tester designed for residential installers who need to document that cabling systems are installed properly and will perform reliably. It quickly qualifies residential cabling systems to support voice, VoIP, 10/100/1000 Ethernet, and CATV, and presents results in the form of professional test reports.  ...more

Designed for testing CATV and security camera coax connections and installations. Finds and identifies multiple coax cables. Includes 4 color-coded F-connectors and BNC adapters. Built-in tone generator ...more

LCD Max. Indication 3999,with length unit. Locate the broken point of a cable. With RS-232 interface, it can be connected to your computer. Takes a new ¡°VECTOR MEASUREMENT¡± technology in measuring the length of the cable. Length Test Range:400m/4000m/40km. Accuracy: ¡À1% rdg ¡À 0.3m. For use in computer network, CATV, communicate engineering. W ...more

The Three-Terminal Ground Resistance Tester is the economical choice for electrical contractors, plant electricians, telephone and CATV technicians making routine ground resistance tests on single electrodes and other simple grounding systems. The instrument is easy to use for quick measurement of resistances from 0.5 to 500 ohms. ...more

The high power output of the Merlin is designed to reduce costly service technician repeat calls due to intermittent cable system problems. The single tone frequency output of the Merlin paired with a leakage detector allows the discovery of damaged cable system components. ...more

Pico Macom?s PICO-PRO is a full-featured handheld signal performance meter providing a complete signal test system in easy-to-carry protective case. The PICO-PRO allows choice of 4 pre-programmed user-selectable band plans accessed via keypad entry for easy measurement of broadcast, CATV, CATV/HRC, and SUB/VHF channels. Direct-entry channel or ...more

The KD Optics range of Singlemode power meters and Laser sources are designed for the testing of SDH, CATV, Telecom and other singlemode links. The power meters are highly accurate with a wide dynamic range, while the laser sources feature a very quick stabilisation time, promoting accurate readings. ...more

MW3303 optical variable attenuator is used for continuously variable optical signal attenuation. As the attenuator is used in the laser system for the on-line testing,therefore MW3303 can be used in the digital system of communication devices (such as:PHD, SDH) and also in the system of adopting analog modulation (CATV). ...more

The AT2500RQv 1.5 GHz spectrum analyzer is a high performance, lightweight, battery powered analyzer designed for CATV headend and field portable applications. The AT2500RQv provides the measurement power required for the latest multi-standard 16/64/256 QAM digital technologies, simplifying the worldwide transition from analog to digital testing. ...more

The model DSG-3000 is a programmable synthesized Vector Signal Generator which frequency range is from 10MHz to 3GHz. It is required for designing and developing of the next generation of wireless communication systems and Broadcasting systems of Digital TV, CATV and Satellite. It is ideally designed for all of digital equipments and RF compone ...more

A next generation CATV installer meter to characterize and measure Analog and Digital video signals. For Analog carriers, Peak Video level, single or dual channel Audio levels and Carrier to Noise measurements are possible on NTSC, PAL, or SECAM video formats. Digital QAM16/64/256 carriers with or without deep Interleaving are measured accurately w ...more

The CX180F is a rack mount monitoring system to check the performance of analog and digital channels being transmitted downstream or towards customers across a CATV HFC network. Equipped with three test ports, key signal parameters including level, BER, MER, and Constellation are scanned continuously and non-intrusively. ...more

This palm size, light weight TDR is an ideal tool for co-axial and twisted pair cable fault location. The One-touch Automatic Fault Locating (AFL) feature quickly identifies cable faults within a distance range of 4,000 meters or 12,000 feet, while the graphic display simplifies viewing of detected impairments. ...more

MW3203 handheld optical power meter is the oldest selfdeveloped portable test instrument in Myway power meter series. It features compact size,easy-to-use and economy advantages which are used for absolute optical power measurement as well as loss relative measurement of fiber optic. MW3203 is an essential test instrument in Optical Communication, ...more

Equipped with the same base feature set as the CX100, the CX120 boasts the industry’s first Upstream Signal Generator with FEC capabilities as an option. This unique feature is used to characterize the HFC return path for CW, QPSK, QAM16, QAM64, or QAM128 transmission while QAM analysis is made possible when the unit is used in conjunction with the ...more

An all-in-one, super-tech installation and maintenance tool for next generation CATV networks. It can be used at the headend for return path ingress scan and return path QAM analysis. Enhanced ingress monitoring in both the forward and reverse paths is possible across a 50dB dynamic range. Adjustable Resolution Bandwidths, measurement dwell times a ...more

Equipped with the same base feature set as the CX100, the CX150 is fitted with a built-in DOCSIS 2.0 compliant Cable Modem that is capable of linking up with a Cable Modem Termination System (CMTS). Cable modem emulation provides valuable statistics pertaining to the upstream and downstream paths and related servers for video, internet and VoIP tra ...more

TW4103 Optical Talk Set is a latest self-developed intelligent instrument that combines functions both of digital optical phone and stabilized light source in one set. It¡¯s widely used in operations of Installation, optical testing, maintenance and fiber attenuation value testing in Data network, CATV and Telecommunication network. TW4103 Talk ...more