Safety Test

Check to determine whether a device is free from hazards.

Showing results - of 16 products found

  • Electrical Safety Tester /

    Company: Sourcetronic GmbH

    The robust, fully automatic Electrical Safety Tester ST400 ensures fast testing cycles incl. documentation (backtracking of data – Traceability). In addition to that, the ST400 Electrical Safety Tester also disposes two USB- Interfaces, LAN, RS232 and digital, as well as analogue I/O ports. I/O tests are ideally used to automatically pilot external systems. The test procedure with an Electrical Safety Tester results as follows: Connect the testee (device under test), chose the settings for the test program (automatic barcode if provided), test and save test protocol. The Electrical Safety Analyzer can of course also be operated manually through a spin-press button, similar to GPS systems used in automobiles. The following operating modes are available: Manual, Remote RS232/USB, Digital and Ethernet. Each Electrical Safety Analyzer can be remote controlled through a comfortable testing software. The GOOD-BAD results will be saved automatically on your databank. Electrical Safety Analyzers will be delivered including a leakage current test in case the device needs to be used in accordance with the medical-technical norm EN 60601. The Electrical Safety Testers of the 60335 series are easy to integrate at the workplace and laboratory.

  • ES601 Plus - Automated Electrical Safety Analyzer

    Company: Datrend Systems

    Unleash the full potential of your ES601Plus with our ES601pc Companion Software. Simply install ES601pc and you’re ready to customize your ES601Plus to handle all your automated testing. ES601pc comes standard with your safety analyzer and allows you to view and print test reports and to customize all aspects of test automation, including safety, ECG, tester and PM checklist procedures.

  • OMNIA II Series - Electrical Safety Compliance Analyzers

    Company: Associated Research

    OMNIA II, our next generation of Electrical Safety Compliance Analyzers, was designed around the way you test. We understand that every testing application is unique and finding the right tester can be difficult. OMNIA II is a multi-function Electrical Safety Compliance Analyzer that provides you with customizable features and unmatched functionality!

  • MULTI-PRO 2000 - Full Function Electrical Safety Analyer

    Company: Netech

    The MULTI-PRO 2000, Electrical Safety Tester is a micro-processor based, full function electrical safety analyzer with a built-in 12 lead ECG Simulator. The combination instrument is designed to test the electrical safety of all types of medical equipment by hospital and field service biomedical technicians. In addition, the built-in ECG Simulator allows performance testing of ECG equipment.

  • R7000 - Electrical Receptacle Analyzer

    Company: National Safety Technologies

    The R7000 is an advanced device that will drastically simplify your electrical receptacle testing! It will enable complianceand promote safety while dramatically reducing time spent testing and generating required reports. An electrical receptacleis tested in a matter of seconds! Outlet test results are displayed as well as a notification of whether the results complywith safety standards. The substantially larger display enables you to view multiple results as you are testing

  • Model 8257 - 7-in-1 500 VA Electrical Safety Compliance Analyzer

    Company: Associated Research

    OMNIA® II Model 8257 provides AC Hipot (500 VA), DC Hipot, Insulation Resistance, Ground Bond / Continuity, Functional Run, and Line Leakage tests in a single DUT connection. The 8257 also includes a built-in 500 VA AC Power source. This feature, unique to OMNIA II, makes Functional Run and Line Leakage testing more productive and efficient. It provides a true one box solution for Line Leakage testing.

  • 19036 - Wound Component EST Analyzer

    Company: Chroma Systems Solutions

    The industry’s first Wound Component Electrical Safety Test (EST) Analyzer that combines impulse winding (surge testing), AC/DC hipot, insulation resistance and DC resistance test measurement functions. Chroma’s 19036 Wound Component EST Analyzer has 5KVac/ 6KVdc high voltage output, 5KV insulation resistance, 6KV layer short impulse (surge) voltage and 4-wire DC resistance measurement with a maximum output of up to 40 channels. Capable of outputting and measuring AC100mA/DC 20mA, Chroma’s 19036 is suitable for testing to high power motor standards such as UL 1004-1. Its 500VA design is also compliant with the output power requirements of EC/UL. Wound component applications include EV motors, servomotors, ascension motors, transformers, solenoid valves, and stator surge testing.

  • GTK-2 - Two Piece Safety Kit

    Company: Gardner Bender

    The Gardner Bender 2-Piece Electrical Tester Kit provides convenient tools for checking AC voltage and electrical receptacle readings. This tester kit offers a compact design that is easy for use in spaces where working room is limited. Circuit Alert Non-Contact Voltage Detector indicates the presence of AC Voltage from 50 - 600 V. Visual (flashing) and audible (beeping) indicators signal presence of voltage. Built-in "safe test" feature assures batteries are operating properly. No need to contact bare conductor. Compact design fits in shirt pocket and includes pocket clip. Includes On/Off button. Operates from 1-AAA battery (included). ETL Listed. 6 Ft. drop rating and 150 lb crush rating. III 600V CAT Rating. 1 Year warranty. TESTS: Outlets, Switches, Circuit breaker panels, Wiring and Light fixtures. Ground Fault Receptacle Tester and Circuit Analyzer tests ground fault receptacles by overloading circuit and tripping GFCI. Plug tester into any circuit protected by GFR-(110-125V AC) and press black button to overload. Tests for seven conditions: ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring. Succession of yellow and red lights provides indication of circuit status or specifies wiring errors. Tester trips GFCI between 6 - 9 ma. TESTS: Standard outlets, GFCI outlets and Extension cords.

  • 7742 - Electrical Safety Compliance Analyzer

    Company: EXTECH Electronics

    Six most common safety tests (ACW,DCW,IR,GB,LLT and RUN TEST). All-in-one display screen with flexibility in veiwing test parameters and results. Date and Time Setting allows the operator to set calibration due date and alert

  • 19036 - Wound Component EST Analyzer

    Company: Chroma ATE

    Chroma 19036 is the industry's first Wound Component Electrical Safety Test (EST) Analyzer that combines the functions of impulse test, hipot, insulation resistance and DC resistance measurements. It has 5kVac/ 6kVdc high voltage output, 5kV insulation resistance, 6kV layer short impulse voltage and 4-wire DC resistance measurement that can comply with the wound components test demands by providing maximum 10 channels output for multichannel scanning tests to save time and labor costs.

  • 19032/19032-P - Electrical Safety Analyzer

    Company: Combinova Marketing

    5 In 1 (ACV/DCV/ IR/GB/LC Test)500VA Power RatingTwin-Port functionOpen / Short Check(OSC)

  • Rigel 266 Plus - Medical Safety Analyzer

    Company: Rigel Medical

    The Rigel 266 Plus is a highly compact, easy-to-use medical electrical safety analyser, designed to test in accordance with IEC/EN 60601-1, MDA DB9801, and AS/NZ 3200.

  • PA2100 - PC Controlled Bench Top Power Analyzer

    Company: Powertek

    The PA2100 is a PC controlled bench top power analyzer, allowing several electrical power measurements to be taken simultaneously during testing - from just one set of input connections. The PA2100's power measurement ability is a must in research and development, manufacturing and required for certification and traceability of manufactured goods. In addition to power measurements, apparent power (VA), harmonics, voltage, current, power factor can all be viewed and stored with ease. The PA2100 wattmeter simply connects between the ac supply and the load, various current transformer options allow measurement with any size of current from 10mA to 10000A. Typical watt meter applications include appliance testing; microwave ovens, electric stoves, heating, air conditioning, TVs, monitors, computers, electronic lighting, fans and motor controllers. Powertek wattmeters are equipped with 4mm/banana safety terminals along with optional "breakout" boxes and clamp current probes for fast and safe measurement.

  • 19032 - Electrical Safety Analyzer

    Company: Chroma Systems Solutions

    AC/DC/IR/GB/LC/Dynamic Function – six instruments in one Function test up to 20 Programmable voltage output and limit value OSC open/short check Flashover detection Human protection circuit Multi-scan device support dynamic leakage current test Standard RS232 interface Optional GPIB interface Large LCD pane Front panel lockout function Support PC software UL/TUV/CE 2-Year factory warranty

  • LKG 610 - Comprehensive Electrical Safety Analyer

    Company: Netech

    The LKG 610, Electrical Safety Analyzer is designed to test any piece of medical equipment. The full featured Electrical Safety Analyzer is microprocessor controlled and has a full compliment of ten leads. The LKG 610, Electrical Safety Analyzer measures line voltage, outlet polarity, device current, earth leakage current, chassis resistance, and case leakage current.

Refine Your Results

Search Filters

  • Electrical Safety Analyzers [x]