Showing results: 31 - 45 of 222 items found.
-
TF142C -
TESTEX Testing Equipment Systems Ltd.
Fabric Pneumatic Bursting Tester, to determine the bursting pressure of fabrics uses pneumatic test method, including knits, woven fabric, non-woven fabric, laminated fabric and other craft-made fabric.A test specimen is clamped over an expansive diaphragm by a circular clamping ring, increasing compressed air pressure is applied to the underside of the diaphragm, causing distension of the fabric until the test specimen bursts, the bursting strength and distension are determined.
-
Aero Nav Laboratories, Inc.
Pneumatic and hydraulic testing is performed to demonstrate operating pressure, pressure drop, volume and flow parameters, as well as performance characteristics, of fluid system components and assemblies.
-
Shimadzu Corp.
Pneumatic non-shift wedge grips have an open-front design and use one-touch chucking by foot operation to provide simple specimen mounting. These grips are suitable for tensile testing materials such as plastics and metals.
-
GPS Prüftechnik GmbH
GPS testing technology offers a wide range of pneumatic adapters. The support with compressed air results in increased ease of use and larger pressures can be built up easily and thus more test needles can be contacted.
-
KRD20 series -
CME Technology Co. Ltd.
The KRD20 series pneumatic bump test machine replaces the traditional mechanical cam-type crash bench and is suitable for repeated impacts on electronic components, equipment and other electrical and electronic products during transportation or working.
-
700HPPK -
Fluke Calibration
The Fluke Calibration 700HPPK Pneumatic Test Pump Kit generates and adjusts pneumatic pressures up to 21 MPa (3000 psi), without requiring a nitrogen bottle or other external pressure supply. It supplies pressure to devices under test (DUTs) that include transmitters, controllers, pilots, digital and analog gauges, and more. It’s the perfect solution for generating high pressure in the field, where conditions and operating surfaces can vary. The 700HPPK is the ideal choice for calibration technicians, test engineers, and instrument technicians working in industries like natural gas transmission and distribution, process, aerospace and defense, who need a simple-to-use, safe and portable pressure source that they can depend on in a wide variety of conditions.
-
ViTec Co. Ltd
The measuring system consists of a test site and a control rack. The test site is equipped with a mounting for the test tool with measuring sensors: vibration, torque and speed, as well as a pneumatic regulator, a filter and a powder type brake clutch. The maximum torque test is performed until the rotation is completely stopped. The screen displays both the directly measured maximum torque and the calculated maximum power of this sample. At the end of the test, the results are presented to the operator on the monitor screen.
-
RCL -
Mountz Inc.
Radial gearing electric torque multipliers are designed for precision tightening and loosening of all heavy duty fastening applications. These multipliers are specially designed for heat plate exchanger applications. The torque multiplier shuts-off when the pre-set torque is achieved. It is non-impacting and operates at a smooth, continuous rotation.
-
YAV90PNT -
6TL Engineering
Use this module in your self test diagnostics fixture. The YAV90PNT can be used as counterpart of the YAV90PNE, to test that is iw working properly.
-
Shimadzu Corp.
These pneumatic grips are used for tensile testing yarn and metal cables and hold specimens using a capstan design. Initial tension can be applied to the specimen to aid sample mounting and alignment and the pneumatic action enables quick and easy specimen insertion.
-
KRD11 series -
CME Technology Co. Ltd.
KRD11 series pneumatic vertical shock test system is featured with advanced design, high degree of automation and reliability, simple operation and convenient maintenance. The system meets the requirements of both shock and bump test, can perform conventional half-sine wave, post-peak sawtooth wave, trapezoid wave and other waveform shock tests.
-
ZDP -
ZOLIX
Model:ZDP Pneumatic Vibration Isolation Optical TableDetails&Spec:Specification :Resonant Frequency: ＜1.5~2.5HzSelf-balance, short response time,high speed balanceSilence free oil compressor , presurre : 3-7kgf/cm2Pneumatic support: two payer, three import valves,4 or 6 gasbagTable structure : three layerTable top : thickness: 4-6mm,1Cr17 Ferromagnetic stainless steelBottom of table : 4-6mm,Carbon Steel;Surface spray treatment of melaninSide : internal: Carbon plateExternal:Black aluminum plateCorners: stainless steelTotal height ( table and support): 800mm, range of adjustment : -10-----+10mm Pitch :25mmx25mm;Screw :M6Weight : Thickness 100mm: 120kg/m2Thickness 200mm: 140kg/m2Thickness 300mm: 167kg/m2
-
Unitech Scales And Measurements Pvt. Ltd
* Study of PLC and its accessories. * All above circuits. * Introduction of timer, counter in all above circuits. * Interfacing PLC with Mimic panel. * Many circuits used in Washing Machine, process controls, drilling machines, etc,.
-
SKZ155D -
SKZ Industrial Co., Ltd
Determination pressure for a variety of fabrics, including knits, woven fabric, non-woven fabric, laminatedfabric and other craft-made variety of fabrics, in standard conditions or under wet bursting strength andbursting dilation.
-
KRD12 series -
CME Technology Co. Ltd.
The KRD12 series shock test system is used to measure and determine the horizontal impact resistance of a product or package, and to evaluate the reliability and structural integrity of the test unit in a horizontal impact environment. The system can perform conventional half-sine wave, post-peak sawtooth wave, or trapezoid wave shock test to realize the shock energy that the product is subjected to in the actual environment, thereby improving the product or packaging structure.
