Showing results: 421 - 435 of 488 items found.
-
ZETLAB Company
Closed-loop servohydraulic test bench control system is based on digital devices of ZETSENSOR series with CAN interface. This system has fast response characteristics, high precision, and compact dimensions. The system enables comprehensive control of the servo drive in automated mode in compliance with the set test parameters such as pressure (force), displacement, along with the parallel control of other system parameters such as temperature, pressure, filter plugging, oil pressure, etc.
-
FlawPRO™ -
Southwest Research Institute
Is a computer program developed and validated by SwRI against full-scale pipe test data as part of a Joint Industry Program (JIP) titled Validation of a Methodology for Assessing Defect Tolerance of Welded Reeled Risers and Flowlines that involved major companies in the offshore industry, including four oil companies, a pipe manufacturer, and a pipeline installer. Although designed to perform engineering critical assessment (ECA) for pipes subjected to high strain when installed by the reeling process, FlawPRO can also perform ECA for conventionally installed pipes. FlawPRO has been used to perform ECA to derive acceptable flaw sizes in support of offshore projects involving pipes installed by the reeling process and using conventional installation methods.
-
P Series -
AMETEK Sensors, Test & Calibration
The P-Series (System D) comparators are hydraulic screw pumps designed for easy, controlled, high pressure generation. Each comparator includes a 4 connection manifold, which can be used for the reference indicator, the device under test, a fine adjust, an isolation valve, or a fluid reservoir. The adjustable reference pressure port lets you set your reference gauge at the best viewing angle. Three models are available for hydraulic oil, water, or both.
-
LXinstruments GmbH
With cars it is easy: Change of oil, check of breaks and V-belt .. etc. - that is normal. But your test system does not need all these things. However it makes sense to look after your test system occasionally and check or change special idems. If you take the time and plan a preventive maintenance your test system will have less unplanned failure times. Less dust means less heat and slower ageing of electronic components.
-
Oxley Group
Typical industrial applications for Oxley Interconnect products include high voltage power supplies, critical computer hard drives, fire safety control equipment, medical and pharmaceutical equipment, oil and gas control systems, power generation and distribution equipment, rail and telecommunications infrastructure. Within aerospace and military markets Oxley products are typically found in aircraft, military vehicles, ground base stations, surface ships and submarines and air and ground communications equipment.
-
Carl E. Holmes Company
SCR-controlled rectifiers are electronically controlled via analog signals for constant voltage and current control. The compact and service-friendly design complies with high industrial requirements and guarantees excellent operational reliability.The input voltage can be from 208 VAC to 600 VAC, 3 PH, 50/60 Hz. Maximum output voltage can be from 6 VDC to 600 VDC. Maximum output can be from 1000 Amps to 100000 Amps. These units can be air cooled, water cooled or oil cooled.
-
LXinstruments GmbH
Insulated test booth with large space for test items. 2 banana sockets for AC connection and 4 banana sockets for the DC connection of the DUTs. IC’s are tested in a long-term test. These are checked in an oil bath so that there are no air gaps to reduce the insulation. Maximum voltage 20 kV. Therefore, insulation tests must be carried out. Ensuring the standard-compliant test. For the safety of the operating personnel, the test cell is electrically locked while the high voltage measurement is active.
-
STP-01RAN/STP-01RFN/STP-01RFB -
HK Film Capacitor Ltd
This series of capacitors is Plastic Enclosure, Dry construction design and doesn't have leakage problem when compared with traditional Metal Enclosure Oil impregnated capacitors.Handle Medium Frequency range, high surge current, RMS current and surge voltage with temperature up to +105CCapacitance : 0.1uF - 15uF ( can be customized )Voltage range : 1,200Vdc to 17,000Vdc / 350Vrms to 6,900VrmsRMS Current - Irms : up to 100Armspeak to peak pulse current - Ipp : up to 5,900AppTemperature ranges : +85C / +105C
-
eddyNCDT 3001 -
Micro-Epsilon Group
The eddyNCDT 3001 is a new, efficient eddy current sensor whose compact dimensions have to date only been reserved for inductive sensors and proximity sensors. The temperature-compensated design provides high stability even in fluctuating ambient temperatures. The eddyNCDT 3001 comes with integrated electronics, offering an outstanding price/performance ratio and easy operation. The eddyNCDT 3001 eddy current sensor is ideally suited to OEM integration and machine building applications. The sensor is factory-calibrated for ferromagnetic and non-ferromagnetic materials, which eliminates the need for field calibration of the sensor. The eddyNCDT 3001 is available with connector or with integrated cable. A robust design combined with the eddy current measuring principle enables measurements in harsh industrial environments (oil, pressure, dirt). In addition, the eddyNCDT 3001 is suitable for offshore/marine applications (salt water).
-
Zhuhai Measure Science and Technology Co. Ltd
Laser sensors can detect, count, trigger, map, profile, scan, and guide as well as verify levels, proximities and distances to practically anything you can think of. Our Laser Distance Sensor MSD30/60/100 are use for the Plant Management and Automation, Security and Surveillance, Vehicle Guidance and Automation and Traffic Management. Such as Car safety range warning, Intelligencespatial orientation, Contour scanning, Aircraft intelligence:control,obstacles, Ship: navigation, beach safety, Space scanning mapping, Safety monitoring and protection of landslides, tunnels, mines, bridges, etc. Flood warning of water level monitoring, intelligent monitoring of crude oil storage, Speed measurement application. They are used where small objects or precise positions are to be detected. If you want to used them we would like to send you the communication protocol and other documents.
-
Chandler Engineering
The variety of models within the Quizix line offers several key advantages. The wide range of flow rates, pressure configurations and available options allow Quizix pumps to meet virtually any experimental requirement from bench top to pilot scale. The ability of Quizix pumps to handle almost any slurry, paste, liquid or gas provides unique capability not found in other positive displacement pumps. Exceptional flow rate accuracy, combined with non-stop pulseless flow makes Quizix pumps ideal for applications involved with rock core analysis/reservoir engineering, oil and gas production enhancement studies, EOR/IOR, PVT, rock mechanics, catalyst or chemical feed stock addition for reactor feed/chemical synthesis and any fluid delivery application where critical fluid delivery or pressure control is required.
-
3520 Series -
KANOMAX USA, Inc.
The Kanomax Piezobalance Dust Monitor 3521/3522 is a unique respirable aerosol monitor, providing direct mass concentration of particulates using PIEZOBALANCE technology; ideal especially for oil mist monitoring. The Kanomax 3521 is equipped with 4 and 10µm impactors while the 3522 is equipped with a 2.5µm impactor. Unlike conventional dust meters, which count particles, a piezobalance dust meter like the 3521 or 3522 “weighs” mass concentration of particulates. As an air sample enters the system, it travels through the impactor, which captures and removes larger particulates away from the sample. Smaller particulates become electrically charged and deposited on the piezo-crystal. The total mass of the deposited particulates affects the piezo-crystal’s frequency. Since the change in frequency is proportional to the mass of the particulates, the actual weight of the particulates is obtained.
-
TMD Technologies Ltd
Our high voltage power supplies offer many features desirable for modern radar and EW applications; high efficiency, ultra low voltage ripple (low noise), high inverter frequencies, ultra low pulse to pulse jitter, low throughput delay and high power density. The units are lightweight and compact with excellent thermal management and the high voltage sections are encapsulated with an oil free, silicone based compound. This provides excellent protection in harsh environments but also enables easy maintenance.
-
ZET 7012-I VER.2 -
ZETLAB Company
Digital gauge pressure ZET 7012-I VER.2 is used in automated control systems and technological processes control systems in various industrial spheres:*oil and gas industry;*metallurgical industry;*energy industry;*construction engineering sector;*construction industry;*food manufacturing industry;*communal services and water supply industry;*automobile transport and shipping facilities.The digital gauge pressure is used for fast measuring of pressure and transfer of the data obtained in digital format via RS-485 or 4-20 mA interface .
-
MEXA-1170SX -
HORIBA, Ltd.
The MEXA 1170 SX is a new instrument used to measure sulfur for after treatment and transient lubricant oil consumption. The analyzer uses ultraviolet fluorescence (UVF) for detection and it can be operated in a total sulfur mode, analyzing sulfur oxides, hydrogen sulfide and all organic sulfur compounds. An inorganic sulfur mode will analyze hydrogen sulfide and the sulfur oxides. The final operational mode will analyze just the sulfur oxides. Any one of these modes can be selected by the user from a front panel interface.
