Filter Results By:

Products

Applications

Manufacturers

Instruments

read precision values.

See Also: Instrument Cables, Instrumentation Amplifiers


Showing recent results 3451 - 3465 of 4259 products found.

  • PXI Oscilloscope

    PXI-5122/778756-01 - NI

    100 MHz, 100 MS/s, 14-Bit PXI Oscilloscope—The PXI‑5122 high-resolution PXI oscilloscope has two channels with flexible settings for coupling, impedance, voltage range, and filtering. PXI Oscilloscopes also feature a number of triggering modes, deep onboard memory, and an instrument driver that includes data streaming and analysis functions. This device is ideal for both time-domain and frequency-domain applications that require high-resolution, low-noise measurements with up to 100 MS/s and 100 MHz of analog bandwidth. The PXI‑5122 also features PXI synchronization and data streaming capabilities.

  • RF Switch Assemblies

    JFW Industries

    RF switches are microwave devices that route a high frequency RF signal through a set transmission path. RF switches from Pasternack are most commonly used in microwave test systems for routing varying RF signals between instruments, allowing multiple tests to be performed at the same time using the same setup. We carry three basic types of RF and microwave switches including PIN diode switches, RF electromechanical relay switches (RF relays) and manual RF switches. Many of our RF and microwave switches are RoHS and REACH compliant.

  • Sentry Hipot Tester AC/DC/IR

    19070 - Chroma Systems Solutions, Inc.

    AC/DC/IR 3 in 1 hipot testerAC 5kV and DC 6kV output1kV insulation resistance testInsulation resistance measurement from 1M to 50Ground continuity checkOpen Short Check(OSC) functionGFI shutdown the instrument when imbalance current > 0.5mAFlashover (ARC) detectionQuick discharge of DUT in IR and DC testPause modeLarge LCD display (240 x 64 dots matrix)UL and TUV approved (*see spec)CE markProgrammable ramp/fall and test timeProgrammable high/low limitSave/Recall program test functionRemote control and interface support2-Year factory warranty

  • Serial BERTs

    Keysight Technologies

    Keysight offers the widest choice of serial BERT products for accurate and efficient characterization, compliance and manufacturing test for digital interfaces in computer, video, datacom and telecom applications operating up to 40 Gb/s.The instruments of the N4900 Serial BERT Series offer excellent signal integrity and analysis capabilities addressing a wide range of applications and technologies up to 44 Gb/s such as PCI Express®, QPI, USB3, SATA, FB-DIMM, MIPI M-PHY, UHS-II, Thunderbolt, DisplayPort, Fibre Channel, XFP/SFP, XFI/SFI, CFP/CAUI, CEI, Infiniband-FDR/EDR, OTN, 10GbE, 100GbE

  • SF6 Gas Filled Standard Capacitors

    W. S. Test Systems P.L.

    SF6 filled compressed-gas capacitors have proven in high-voltage technique as loss-free capacitance standards. Their capacitance is fairly independent of the voltage level, ambient temperature, proximity effects and place of installation. However, the most appreciated property of compressed-gas capacitors is their extremely small loss factor. Therefore, these capacitors are used as standard capacitors in bridge circuits for capacitance and tan measurements on all kinds of electrical apparatus and insulating media, for instance capacitors, cables, bushings support insulators, power transformers, instrument transformers, circuit breakers, switching rods, generators, plastics, insulating oil , etc.

  • Shake Table Testing

    Response Dynamics Vibration Engineering, Inc.

    Shake table testing is often used in prototype analysis, failure analysis, shipping vibration testing and vibration sensitivity testing. We know what boundary conditions are vital for effective testing, how and where to instrument the system, how to deal with for off axis excitation (often not accounted for), and make the most efficient use of testing time. Let us have a look at your system and any specified vibration criteria before the shake test is designed. We can interpret the criteria, make sure it is applied appropriately, and make recommendations that will save valuable time and expense.

  • Spectral Plotting Tool

    SearchLight™ - Semrock, Inc

    SearchLight is a free, online spectral plotting and analysis tool that allows fluorescence microscope users and optical instrument designers to model & evaluate the spectral performance of fluorophores, filter sets, light sources, and detectors as components of an overall system. Its intuitive user interface makes it easy to manipulate spectral component specifications and plot spectral results. The System Calculator allows the user to quantify system metrics including signal, SNR, and bleed through; as well as to compare various system configurations against each other. earchLight App available for iOS and Android

  • Static Pressure Meters

    Fieldpiece Instruments, Inc

    Portable dual port manometer accessory head for use with our modular multimeters (DMMs) and instruments. Measures gas pressure, static pressure and pressure differential. The ADMN2 includes a zero adjust and the Auto Power-Off (APO) function to conserve battery life. Disable APO for data logging. The ADMN2 measures pressure between -60inWC and 60inWC (inches of water column) and -150.0 to 150.0 mBar. The ADMN2 also measures P1 or P2 pressure readings and calculates the difference between P1 and P2. Take static pressure measurements using the resolution mode of 0.01inWC or 0.01mBar.

  • Super Megohm Meters

    SM7110 and SM7120 - HIOKI E.E. Corp

    Both products are designed for use in evaluating and testing the performance of electronic components used in products such as smartphones and hybrid vehicles. To accommodate vehicle components with increasingly high breakdown voltages, the SM7120 is the first insulation tester in the world to be able to output a measurement voltage of 2000 V (the SM7110 supports measurement voltage output of up to 1000 V). In addition, both products can complete testing twice as quickly as the previous Hioki model while offering dramatically improved measurement reproducibility and noise resistance. As a result, the new instruments promise to significantly improve evaluation and testing productivity.

  • Sweating Thermal Guarded Hotplate

    Sataton Instruments Technology CO., Ltd

    Sweating guarded hotplate is the textile testing instrument for measuring of thermal and water-vapour resistance properties under steady-state conditions. By testing the thermal resistance and water-vapour resistance of textile materials, the tester provides a direct data for characterizing the textiles’ physiological comfort which involve a complex combination of heat and mass transfer. The hotplate is intended to simulate the heat and mass transfer processes which occur next to human skin and measure the hence transport properties in a steady-state conditions involving combinations of temperature relative humidity, air speed, and in liquid or gaseous phase.

  • System Development

    Xilinx, Inc.

    In today’s competitive marketplace, having the ability to rapidly prototype, validate and deploy complex systems can translate to significant time to market advantages. Xilinx All Programmable SoC and MPSoC devices integrates the software programmability of a processor with the hardware programmability of an FPGA, providing with unrivaled levels of system performance, flexibility, and scalability.  Bringing complex sub-systems together from disparate domains can take many engineering years of effort. Xilinx works closely with world class partners like The Mathworks™ and National Instruments™ to enable rapid system development.

  • Temperature Simulators

    ThermoWorks

    A single select button scrolls quickly between the 3 factory set calibration points for efficiency. Two models to choose from: 271-018 (0°F, 32°F, 212°F) and 271-019 (32°F, 212°F, 500°F). Each unit includes a 3-point UKAS Accredited Calibration Certificate so you know that you''re using a precision instrument. Also included is a 3 foot type K test lead for connecting up your type K meters. You get precision at an economic price. Simple and fast!

  • Temperature Transmitters

    Rotronic Instrument Corp.

    A temperature transmitter is an electrical instrument that interfaces a temperature sensor (e.g. thermocouple, RTD, or thermistor) to a measurement or control device (e.g. PLC, DCS, PC, loop controller, data logger, display, recorder, etc.). Typically, temperature transmitters isolate, amplify, filter noise, linearize, and convert the input signal from the sensor then send (transmit) a standardized output signal to the control device. Common electrical output signals used in manufacturing plants are 4-20mA or 0-10V DC ranges. For example, 4mA could represent 0°C and 20mA means 100°C.

  • Test Analysis for Land Seismic Systems

    Testif-i Land - Verif-i Ltd

    Testif-i Land is an independent, powerful and cost effective software suite that allows you independently process instruments, source and receiver tests to confirm that the equipment is performing correctly and within specification. The software includes modules to perform comprehensive analysis of vibrator wireline similarity test data. Analysis includes a harmonic intensity plot which can highlight problems such as sub-harmonics which may not be seen on numerical results. Geophone pulse tests can be analysed using the receiver response module and test data from third party geophone testers can be graphed and statistics produced for ease of interpretation.

  • Thermocouple Thermometers

    General Tools & Instruments

    These industrial instruments’ claim to fame is their accuracy. General offers a wide variety of thermocouple thermometers distinguished by features such as the number of independent channels supported (from one to twelve) –such as the DT4208SD 12 Channel ThermoCouple Thermometer, ruggedness (the ability to survive a fall) – such as the Rugged DT62 Two Channel Thermocouple Thermometer, compatibility with one or more thermocouple types – such as the DT80-2 Two Channel “K” & “J” Thermocouple Thermometer, and data logging capability – such as the DT4947SD 4 Channel Thermocouple Thermometer with Excel Formatted Data Logging SD Card. Our portfolio of thermocouple probes is just as extensive.