Filter Results By:

Products

Applications

Manufacturers

Instruments

read precision values.

See Also: Instrument Cables, Instrumentation Amplifiers


Showing recent results 3421 - 3435 of 4259 products found.

  • Exploration Seismograph

    GEA 3 - PASI srl

    Gea3 is a 24-bit real data acquisition seismograph in a waterproof container.This small, extremely lightweight instrument is equipped with 3 channels+one displayable trigger channel and is the perfect solution for a variety of applications: *DOWN-HOLE seismic measurements with the use of a 3D well geophone (such as PASI Mod.GFA or Mod.DHTG)*CROSS-HOLE seismic measurements combined with a 3D well geophone (such as PASI Mod.GFA or Mod.DHTG) and a P/S hole energizersmall-scale seismic refraction with surface geophones and 3-channel seismic cable*MASW and Vs30 profiles with a special triaxial geophone (like PASI Mod.3DLG - 2Hz)

  • Fiber Identifiers & Talk Set

    Fiberinthebox

    Fiber Identifiers and Talk Set are essential installation and maintenance instrument in data networks, CATV and telecommunication networks. Fiber identifier can identify the optical fiber by detecting the optical signals transmitted through the cables. Talk Set combines in one set the functions of both a digital optical phone and a stabilized light source. It is usually used in pairs, and can work over 80km. Fiberinthebox supply different types of Fiber Identifiers and Talk Set to meet you requirement, and they are with rechargeable battery and power supply adapter, so you can use them easily.

  • Fixed Attenuator

    FAXE - Elmika

    Fixed Attenuators are waveguide components for introduction of some particular attenuation value in to the waveguide network for signal leveling or reflection compensation. The attenuators have two types of design: with resistive plate in the waveguide diagonal plane or using coupling technology. The FAXE 3, 6, 10, 15, 20, 30 dB attenuators are available in waveguide bands from 18 through 225 GHz. The FAXE Fixed Attenuators can be used as laboratory Standards against which other instruments or devices are calibrated in case the parameters of these Fixed Attenuators are stable enough and were measured with appropriate accuracy.

  • Forensic Products

    ScienceGL, Inc.

    During 6 years of R&D, original 4D hyper-spectrum data processor software was developed. Based on Hyper-spectrum image stack processing the software is optimized for specific document examining tasks. The program is designed to process data from Hyper-spectral imaging equipment. It was successfully implemented in our partner product ForensicXP automatic full digital hyper-imaging spectrograph. The original patent pending method was developed for spectral signature unwrapping and enhancement of spectrometer output. An exceptional sensitivity of the instrument and broad spectral range permits to detect very small differences in similar inks.

  • For Flaw Detection, Thickness & Dimensional Measurement In Tube & Bar.

    ECHOMAC® FD6 MULTICHANNEL UT - Magnetic Analysis Corp

    *Versatile Ultrasonic tester with superior performance and versatile, intuitive operation.*For full inspection of tubes, pipes and bars, plate and weld.*Operate on or off line.*Upgrade and/or replace older ultrasonic testers.*Use with rotary, spin-the-tube, squirter and bubbler installations.*Vivid, real time, flicker free full color display of test signals, thresholds and settings.*Up to 32 independent channels in one instrument.*Model 6A is GE Qualified as of 9-6-16 for P3TF31 Class A & B, & P29TF82 Class A & B, typical requirements for nuclear and aerospace applications.

  • Guardian Hipot Tester AC/DC/IR/SCAN

    19050 - Chroma Systems Solutions, Inc.

    AC/DC/IR 3 in 1 hipot testerAC 5kV and DC 6kV output1kV insulation resistance testInsulation resistance measurement: 1Ω~50ΩGround continuity checkOpen Short Check(OSC) functionGFI shutdown the instrument when imbalance current > 0.5mAFlashover (ARC) detectionQuick discharge of DUT in IR and DC testPause modeLarge LCD display (240 x 64 dots matrix)UL and TUV approved (*see spec)CE markProgrammable ramp/fall and test timeProgrammable high/low limitSave/Recall program test functionRemote control and interface support2-Year factory warranty

  • HIPOT Insulation Testers

    Laycock Systems

    Crown high voltage, transformer type hipot insulation testers are safe, easy to use for quick, positive determination of grounds, shorts, and broken wires in motors, transformers and other low voltage equipment or wiring systems. A turn of the selector switch gives a selection of seven voltages; 500, 1080, 1250, 1500, 1750, 2000 or 2500 volts calibrated to +/- 5% accuracy; NEMA recommendation for insulation test is twice normal voltage plus 1000 volts. Since this instrument has a capacity of 2500 volts, it readily accommodates all normal requirements.

  • Industrial Automatic Emissivity Measurement System

    Pyrofiber Industrial - Pyrometer Instrument Company

    The Pyrofiber® Industrial Automatic Emissivity Measurement System (AEMS) infrared thermometer uses the latest fiber optic sensor and pulsed laser technology to precisely measure the true target non contact temperature measurement. While all non contact infrared thermometer instruments measure a target radiance temperature, the Pyrofiber® Industrial dynamically determines a targets emissivity value resulting in unmatched temperature control accuracy to ±3° C. With the Pyrofiber® Industrial, laboratory precision temperature control measurement can be made in harsh industrial environments.

  • ISA bus GPIB Controller Card

    Model 488-PC2 - ICS Electronics

    * Adds GPIB Controller capability to any PC with an ISA bus.* Fast data transfer rate, > 300kbytes per second.* Drivers for MS DOS, Windows 3.1, Windows 95 and Windows 98. * IEEE-488.2 linkable libraries for Quick Basic, MS Visual Basic, Borkand C/C++ andMicrosoft C/C++.* Functions as System Controller, Controller-in-charge or a GPIB Device.* Replaces most generic ISA 7210 Cards and NI PC2a cards.* Includes interactive keyboard Control Utility for controlling instruments from the computer keyboard without writing a program.

  • Isothermal Titration Calorimeters

    MicroCal ITC Range - Malvern Panalytical Ltd

    The "Gold Standard" for measuring binding affinity and stoichiometry. MicroCal ITC isothermal titration calorimeters are used to study a wide range of biomolecular interactions. The applications range from drug design to fundamental research such as the understanding and regulation of signal transduction pathways. These systems deliver direct, label free and in-solution measurements of binding affinity and thermodynamic parameters in a single experiment. They have high sensitivity, low sample consumption and options for automation to minimize ‘hands on’ time. A choice of instruments ensures that MicroCal ITC calorimeters meet the varied and demanding requirements of today’s life science laboratories.

  • Laser Diode Controllers

    Newport Corporation

    Laser diode controllers have an integrated precision laser diode driver and high stability temperature controller. Multiple levels of laser diode protection are built into each instrument including isolated power supplies, slow start, adjustable current limit and compliance voltage, intermittent contact protection, and output shorting relays. To complement our line of laser diode controllers, ILX Lightwave offers a wide variety of laser diode mounts and fixtures with standard interconnection cables.  Please see our Laser Diode Controller Guide for additional information.

  • Lasers & Light Sources

    SOLAR SIMULATORS - AMS Technologies AG

    Depending on your application requirements, Oriel Instruments provide a variety of Solar Simulators to fit your needs. Oriel "Sol" series simulators offer standards compliance to the most current standards from the ASTM, IEC, and JIS with an area of illumination that works for your samples. If your application is in the Ultra-Violet (UV) Oriel offers the COLIPA standard's compliant Sol-UV Solar Simulators. If your application doesn't have stringent requirements, Oriel also offers a variety of large area Solar Flood Sources with a variety of lamp options and power ranging from 100 to 1600W.

  • Loaded Spectrophotometer

    DSCD-900 - Lisun Electronics Inc.

    DSCD-900 is a highly performance spectrophotometer with test caliber upward. The instrument adopts the geometric conditions of D/8 lighting and observation of CIE recommendations, integration of the full band LED composite light source, double beam optical system, ETC every-time calibration technology, spectral reflectance standard deviation within 0.08, maximum of colorimetric values ΔE*ab is 0.03, to provide all the necessary color formula. It could be widely used for coating, printing, textile, meet plastic, food, medicine, automobile field to meet customers’ measurement requirement.

  • Low MU Permeability Indicator

    Severn Engineering Co., INC.

    The Low Mu Permeability Indicator is a simple, rugged, non-destructive inspection instrument developed for laboratory, shop and field use. The GO, NO-GO feature permits instant acceptance testing of austenitic stainless and Manganese steel base and weld materials. The Indicator requires no external standards, no adjustments, no visual readings and is unaffected by position. It performs equally well on sheets, plates, rods, irregular shaped objects and individual parts of complex components. It is effective in locating areas of high or low permeability in heterogeneous products and has application where cold forming and annealing operations are required.

  • Microtomography

    Bruker Corporation

    Have you ever seen images from a medical CT-scanner? Now, the same technique can be applied to your micro samples! SkyScan systems from Bruker microCT allow you to cut virtual sections or even fly through samples non-destructively. No preparation, coating or vacuum treatment is needed. Bruker microCT micro-tomography is available in a range of easy-to-use desktop instruments, which generate 3D images of your sample’s morphology and internal microstructure with resolution down to the sub-micron level. Software for visualization and analysis in 3D is included with all SkyScan systems.