Showing results: 466 - 480 of 1008 items found.
-
FWDSU -
Teledyne SP Devices
The FWDSU firmware option enables high-speed peer-to-peer (P2P) data streaming to solid-state drive (SSD) storage and is intended for high-speed recording systems. The main advantage of P2P compared to conventional methods is that it significantly reduces the workload on the CPU and DRAM of the host PC. Data is transferred directly from the digitizer to the storage device and therefore avoids unnecessary involvement of the host PC.
-
34959A -
Keysight Technologies
The Keysight 34959A module for the 34980A Multifunction Switch/Measure Unit can be used to create custom designs inside the Mainframe. You can control your circuits with access to both the +12V and +5V supplies, 16 GPIO ports, and 32 relay drive lines. The faceplate has cutouts for the most common connectors. The breadboard module can be programmed using standard read and write commands in SCPI.
-
10705A -
Keysight Technologies
The Keysight 10705A Single Beam Interferometer, the smallest linear interferometer, is designed for making low mass or limited space single axis measurements. It is ideal for use in disk drive and other confined space applications. The single beam interferometer is called that because the outgoing and returning beams are superimposed on each other, giving the appearance of only one beam traveling between the interferometer and the retroreflector.
-
Macom Technology Solutions Holdings Inc.
MACOM’s switch drivers bridge the gap between digital control signals and the analog voltages and currents required to drive our extensive family of RF, microwave and millimeter wave PIN diode and FET switches.
-
720SN -
Com-Ten Industries
Sturdy ball screw drives allow for smoother operation and precise positioning. Stands include the touchscreen ComTouch Total Control system. These systems benefit from supporting our universal test software COMTEST.
-
Dewetron GmbH
Real drive and test bench applicationMultiple power analyzer in one instrumentUltra flexible channel configurationWide range of fundamental frequencyCAN interface for automotive and test bench linkInternal current transducer supply and TEDS support
-
DP-VXI-4503 -
Data Patterns Pvt. Ltd.
DP-VXI-4503 is a 80 channel, one Form C (SPDT) relay switch designed as a C size VXI module. This high density switch module is designed with a register based interface occupying only one VXI slot. This module uses two Form ‘C’ relay switches. Out of the two contacts in each relay, one is used to provide the status of the relay through read back and the other is used for switching purpose.The user can write the command for the selected channels on to the primary latch of the FPGA section. Readback is available to confirm the selected commands. On command, the data from the primary latch is transferred to the secondary latch. The relay driver section provides the necessary drive to switch ON the relays. The buffers in this section drive the relay coils.This module features a back plane trigger for VXI triggered operation. On receipt of the back plane trigger the programmed relays will be energised/de-energised. Alternatively, software trigger can be used.
-
S-108 -
Notice
SLED Source & Driver slot module of FOTS system is an efficient module that can drive a stable high power broadband source and modulate a high power SLED to output a high bit rate optical signal. As a high power broadband SLED source, this module can drive the maximum output power of more than 14 dBm and has a stable wideband source characteristics of >90nm@-20dBm/nm. As a high current (400mA) modulation technique, it shows a high power and high bit rate digital signal of > 155 Mbps with > 13 dBm peak power.
-
mSATA SSD Series -
ADLINK Technology Inc.
ADLINK’s mSATA SSD Series with the SATA 6Gb/s interface is fully compliant with the standard mSATA form factor, also known as JEDEC MO300. Utilizing Toggle 2.0 MLC flash technology, capacities of up to 1TB are available with support for read/write speeds of up to 550MB/sec and 500MB/sec respectively . Additionally, the power consumption of the ADLINK’s mSATA modules is much lower than that of traditional hard drives.
-
EraseSURE -
Extreme Protocol Solutions
In keeping with the NIST requirements for data sanitization verification, Extreme Protocol Solutions has developed EraseSURE. This product is a completely separate tool from our XErase product line and is focused exclusively on erasure verification and unlike other Verification tools that can connect to a handful of drives, EraseSURE can verify hundreds of devices simultaneously including laptops, desktops, servers and SAS,SATA,FC and SCSI storage arrays.
-
TUV Rheinland Inc
Whether you manufacture or sell CD and DVD drives, laser pointers, or Blu Ray discs - you are probably more than aware of the potential hazards of high-powered, bundled radiation in laser products. As an independent testing institute, TÜV Rheinland can check your products for full compliance. We can classify and certify your products in accordance with international standards and the prescribed DIN EN 60825 norm.
-
Maxi-Burn -
MaxiTest LLC
The MaxiBurn Tube Preheater is a 2U rack mountable or bench top unit for heating 30 Octal Base Tubes. Designed for continuous use heating standard power pentodes to normalize their characteristics before testing or matching the MaxiBurn powers the tube filaments and drives a nominal plate current through each tube. Normal function of each tube is indicated by a glowing LED associated with the tube.
-
SYS-24 -
Eddy Co.
The system shown here was built for a customer to be used in metallization, a common use for many smaller systems. It is also fully capable of performing optical coatings when equipped to do so. This particular system came equipped with a 16" APD ISO Flange mounted cyropump, and a Varian tri-scroll for roughing. The cooling tubes for the crystals as well as the drive motor for the parts holder can be seen on the top of the chamber.
-
VIEW Micro-Metrology
No matter what the requirement for ultra high-precision measurement, VIEW has the ideal solution. VIEW non-contact measurement systems utilize sub-pixel image feature detection with either field-of-view (FOV) or point-to-point (PTP) configurations for exceptional accuracy and repeatability. From etch-dimensions on hard disk drive (HDD) heads to semiconductor overlay measurements, we provide the accuracy you need for quality manufacturing.
-
1500 -
Dynamic Systems Inc.
The Gleeble 1500 platform was introduced in the late 1970s and has served as an industry leader in thermal-mechanical simulation for decades. While many upgrades have been made to the 1500 platform, including the Series 3 Digital Control Update, advances in technology and a continuing drive to innovate by the team at Dynamic Systems has resulted in new and improved model lines, including the Gleeble 3180, 3500 and 3800.
