Showing recent results 661 - 675 of 3541 products found.
-
DSOX1AUTO - Keysight Technologies
The automotive serial triggering and analysis (CAN, LIN) option for InfiniiVision 1000 X-Series oscilloscopes allows you to trigger on either standard or extended CAN message IDs, including the message ID of a remote transfer request frame. It supports triggering on a data frame and allows you to specify message IDs, data and data length for filtering messages of interest. Triggering on active error frames also is supported. In addition, it supports triggering on LIN frame IDs and data, and it includes color-coded parity and check sums errors. You can easily isolate serial packets to find error sources due to hardware or software related problems.
-
SIMS 4550 - CAMECA
The CAMECA SIMS 4550 offers extended capabilities for ultra shallow depth profiling, trace element and composition measurements of thin layers in Si, high-k, SiGe and other compound materials such as III-V for optical devices.
-
Evans Analytical Group®
ICP-OES measures the light emitted at element-specific characteristic wavelengths from thermally excited analyte ions . This light emitted is separated and measured in a spectrometer, yielding an intensity measurement that can be converted to an elemental concentration by comparison with calibration standards. ICP-MS (ICP-Mass Spec) measures the masses of the element ions generated by the high temperature argon plasma. The ions created in the plasma are separated by their mass to charge ratios, enabling the identifcation and quantitation of unknown materials. ICP-MS offers extremely high sensitivity (i.e. low detection limits) for a wide range of elements
-
NI-RFmx Noise Figure - NI
Measure noise figure, gain, Y-factor, effective temperatures, hot and cold power, and moreOptimized calibration and measurement routines for multi-DUT test using Y-factor and cold sourceSupports the PXIe-5668R 26.5 GHz VSA, the PXIe-5698 26.5 GHz preamplifier, and VSTsDesigned for use with industry-standard noise sources such as the Noisecom NC346 Series
-
N9030B-RT2 - Keysight Technologies
See, capture, and understand elusive signals as short as 3.57 s with 100% POI and a complete set of advanced triggersView signal dynamics with integrated real-time displaysMaximize your investment by adding RTSA at a fraction of the cost of a dedicated solutionEasily integrate the 89600 software and thoroughly analyze complex signals Industry-leading 3 year warranty Every spec verified, adjustments included Lock in support & peak performance from the start
-
NI-RFmx W-CDMA/HSPA+ - NI
The NI-RFmx W-CDMA personality is a highly optimized API for performing physical layer measurements on W-CDMA cellular standard signals. NI-RFmx W-CDMA is completely interoperable with all NI-RFmx APIs. It provides simple access to the most advanced optimization techniques such as multi-measurement parallelism and multi-DUT measurements. The result is extremely fast and high-quality measurements with minimal software development efforts.
-
PDA-604A - Sifos Technologies, Inc.
The One-Box solution for 802.3 PD verification including flexible emulation of PSE behaviors, scaleable feature configurations, and plug ’n’ play testing using a Windows PC. Key features include:• Scaleable PSE and Cable Plant Emulations• Optional Automated PD Conformance Test Suite(s)• Optional Automated Load Monitor Assesses Average, Peak, Tcut Window, and MPS Power Compliances• Accurate Metering: Voltage, Current, Power Sampling at PD Interface• 10/100/1000Base-T Switched Network Interface for Remote PD Control• USB Interface for Plug'n Play Instrument Control• PDA Interactive Graphical User Interface• PowerShell PDA Interactive Scripting Environment• Binary API (DLL) for Integration to other Programming Environments• Extensive Reference Documentation• Compliance Tested for Safety and Emissions
-
MKS Instruments
The MultiGas™ TFS™ Monitor is an online, multi-compound, trace gas monitoring system in a stand-alone 19-inch rack enclosure. It uses an innovative tunable filter spectroscopy technology enabling high selectivity and stability measurement. Low detection limit (sub-ppm levels for most gases) is achieved through the use of high throughput optics coupled with a long-path gas cell and a high sensitivity detector.
-
DSOX2AUTO - Keysight Technologies
The automotive serial triggering and analysis (CAN, LIN) option for InfiniiVision 2000 X-Series oscilloscopes allows you to trigger on either standard or extended CAN message IDs, including the message ID of a remote transfer request frame. It supports triggering on a data frame, and allows you to specify message IDs, data and data length for filtering messages of interest. Triggering on active error frames also is supported. In addition, it supports triggering on LIN frame IDs and data, and includes color-coded parity and check sums errors. You can easily isolate serial packets to find sources of errors due to hardware or software related problems.Use the automatic Search & Navigation capability to easily set up specific search criteria and then quickly navigate to "found and marked" events using the scope's front panel forward and back navigation keys.
-
DSOX2EMBD - Keysight Technologies
The IC and SPI serial decode option for InfiniiVision 2000 X-Series displays responsive, time-aligned, on-screen decode of Inter-Integrated Circuit (IC) and 2-wire, 3-wire or 4-wire Serial Peripheral Interface (SPI) serial communication busses. Because it is hardware-based, it provides the fastest throughput solution for triggering on and analyzing IC and SPI serial busses found in a wide variety of embedded designs. You can easily isolate serial packets to find sources of errors due hardware or software related problems. Use the automatic Search & Navigation capability to easily set up specific search criteria and then quickly navigate to "found and marked" events using the scope's front panel forward and back navigation keys.
-
ADE9000 - Analog Devices Inc.
The ADE9000 is a highly accurate, fully integrated energy-metering device. Interfacing with both current transformer (CT) and Rogowski coil sensors, the ADE9000 enables users to develop a three-phase metrology platform, which achieves high performance for Class 1 through Class 0.2 meters. Power quality features enable advanced meter designs with fast rms measurements and power quality level monitoring for EN50160 compliance. The ADE9000 integrates seven high performances ADC’s, a flexible DSP core. An integrated high-end reference ensures low drift over temperature with a combined drift of less than ±25 ppm/°C max for the whole channel including PGA and ADC.
-
LightSpeed1000™ - GL Communications Inc.
Voice, data, and video traffic is exploding as smartphones, IP TV, video streaming, and "cloud" based services takeoff. A majority of the backbone transport for these applications continues to be SONET and SDH optical transmission networks. A dominant protocol for IP transport is PoS (Packet over SONET) and another is ATM (Asynchronous Transfer Mode). Both schemes are packet based, with ATM using fixed size packets of 53 bytes called "cells", and PoS using variable packet sizes closely matching to Ethernet frames. GL's LightSpeed1000™ hardware platform (PCIe Card and USB Pod) is capable of OC-3/12 and STM-1/4 wire-speed processing on quad optical ports for functions such as wire-speed recording and wire-speed playback of Unchannelized and Channelized ATM, PoS, and RAW Traffic.
-
ANALYSIS 3P - ZOGLAB Microsystem Co., Ltd.
ANALYSIS 3P (Professional Version) interface consists of main menu, toolbar, property bar, submenu, main display area, numerical table and status bar, which is easy-to-operate.
-
ANALYSIS 3 - ZOGLAB Microsystem Co., Ltd.
ANALYSIS 3 provides real-time data collection, makes corresponding graph and datalist updating. Over more, this software keeps PC hard drives as mass memory for storing real time collected data.
-
Water Analysis System - Shimadzu Corp.
Easy, Accurate Water Analysis of 22 Sample Types/39 Items
