Loop backs
connect input to ouput to test I/O loop.
-
Product
Back and Forth Scratching Tester
WGQ-60
-
Shanghai Dean Electrical Co., Ltd
Executive standard: NEMA、JIS; Inspection standard: JB/T4279.15-2008Used to detect the scraping resistance of coating and cable insulation layer of flat wires of 0.800～5.600mm (narrow side) and the silk and enamel covered round wires with nominal conductor diameter of 0.100～5.000mm;Application of SCM control allows for fast operation and strong anti-interference capacity;Sample support table allows for parallel rise and fall, maintaining close contact between the entire plane with sample;Scratching needle is vertical to the paint scraping direction and parallel with sample supporting table;When film is scratched and the action current is ≥5mA, painting scraper would automatically stop scraping;LED would automatically display the number of scraping.
-
Product
Single Loop Controller
3200
-
The instrument has the largest red or green digital display in a 1/32 DIN package. In addition to the red or green display the 3200 benefits from three additional multi-colour LEDs to indicate process, alarm and configuration statuses.
-
Product
Push Back Probes (VF100) VF10080B0001G15
1006452
-
The Push Back Probes (VF100) VF10080B0001G15, with order code 1006452, is crafted for high precision applications requiring reliable connectivity and longevity. Designed with a basic contact probe configuration, it features a pitch of 2.54 mm, making it ideal for various electronics testing scenarios. The operational temperature range of -45°C to +100°C ensures its utility in extreme conditions, addressing a wide array of industry needs. With a continuous current capacity of 5.00 A, this product guarantees robust performance, complemented by a typical contact resistance of 30.00 mOhm, ensuring minimal signal loss during operation.
-
Product
Loop Resistance Measuring Device According to DIN EN 61557-3 (VDE 0413-3)
-
PeakTech Prüf- und Messtechnik GmbH
A loop tester which is used to test the safety of electrical systems. These device measures the impedance of the short-circuit loop between the outer conductors of a circuit, whereby the probable short-circuit current is calculated. The protection of the circuit (miniature circuit breaker) must therefore trigger at a lower current than the expected short-circuit current, in order to avoid excessive heating of the lines and thus a fire risk. The PeakTech 2715 is due to its function and its robust design almost indispensable when performing new installations, but also for general checking of electrical systems, this device is the ideal companion.
-
Product
Push Back Probes (VF4) VF406B300G05
1004464
-
The Push Back Probes (VF4) VF406B300G05 is a critical component designed for high-precision applications, particularly where temperature and mechanical integrity are essential. These probes feature a basic contact design with a pitch of 4.00 mm (157 mil), making them versatile for various electrical connections. The operational temperature range spans from -45°C to +100°C, ensuring reliability in extreme conditions.
-
Product
Push Back Probes (VF4) HVF4RD
1043744
-
The HVF4RD Push Back Probes are an essential component for various applications that require reliable electrical connections under challenging conditions. With a continuous current capacity of 8.00 A, these probes are designed to deliver optimal performance in demanding environments, ensuring safety and efficiency. The internal thread specification of 2.5X0.35 allows for secure installations and compatibility with a range of equipment, making these probes an ideal choice for professionals seeking quality and reliability in their tools.
-
Product
Back Pressure Test Kit
389
-
Thexton Manufacturing Company, Inc.
Aids in diagnosing clogged or restricted exhaust systems.
-
Product
Antenna, Active Loop
EM-6876 | 9 KHz – 30 MHz
-
The Electro-Metrics EM-6876 Active Loop Antenna is used with EMI Receivers and Spectrum Analyzers with 50 ohm input and covers the frequency range of 9 kHz to 30 MHz.
-
Product
Push Back Probes (VF3) VF383B0006G15
1006146
-
The Push Back Probes (VF3) VF383B0006G15 are designed to meet a wide array of needs across various applications, delivering exceptional performance with precision and reliability. With a temperature range of -45°C to +100°C, these reliable contact probes ensure optimal operation in diverse environmental conditions. The basic contact probe design, coupled with an impressive continuous current rating of 8.00 A and a low typical contact resistance of 30.00 mOhm, makes them suitable for demanding tasks in both industrial and commercial settings.
-
Product
Push Back Probes (VF4) VF405B300G20
1002317
-
The Push Back Probes (VF4) VF405B300G20, with order code 1002317, is an innovative solution designed for precision contact in various applications. Featuring a basic contact probe design, this model boasts a pitch of 4.00 mm (157 mil) and operates efficiently within a temperature range of -45°C to +100°C. The probe is crafted for reliability, offering a continuous current capacity of 10.00 A and a typical contact resistance of just 30.00 mOhm, making it ideal for demanding environments where low resistance is crucial.
-
Product
Push Back Probes (VF4) VF483B0002G25
1005193
-
The Push Back Probes (VF4) VF483B0002G25 represent a pinnacle in precision touch probing technology, ideal for high-performance applications demanding reliability and accuracy. These basic contact probes feature a design meticulously engineered to operate within an extensive temperature range of -45°C to +100°C, making them versatile for use in diverse environments. With a pitch of 4.00 mm (157 mil), the probes ensure effective contact with minimal interference, while their significant preload of 300 cN and robust spring force of 2500 cN guarantee consistent performance.
-
Product
Resistance Tester With Leakage Current (Loop Current)
GT00WD00ZY
-
*screen display*Double protection insulation*Non-contact measured resistance, safe, fast
-
Product
Exhaust Back Pressure Tester
33600
-
Use to test for clogged or obstructed catalytic converters and mufflers. Fast and easy to use - threads into Oxygen Sensor Port. Includes 12mm and 18mm adapters to fit most domestic and imported vehicles. Gage measures 2 1/2" diameter and has dual scale: 15 PSI and 1.00 Kg/Cm2. Hose is 41" long.
-
Product
High Current Short Circuit Loop Impedance Meter
AMZC-310S
-
Measurement of very small short-circuit loop impedances (with resolution of 0,1mΩ) using the current of 150A under 230V, maximum 280A under 440V, or measurement using the current of 23A under 230V, maximum 42A under 440V
-
Product
THREE WAY BACK PRESSURE KIT
TU24APB
-
*Allows quicker and more accurate testing of exhaust blockages in catalytic converters, mufflers, etc*2-1/2" gauge features two multi-colored bands - idle and 2,500 RPM - with pressures shown in PSI and bar*Includes 6' of hose, enough length to test from driver's seat
-
Product
Push Back Probes (VF100) VF10017B180G15
1002252
-
The Push Back Probes (VF100), specifically the VF10017B180G15 model, are designed as essential tools in various electronic applications. Known for their basic contact probe design, these probes are capable of operating under extreme temperatures ranging from -45°C to +100°C. Their high durability is underscored by the beryllium copper tip and robust brass barrel, both plated with gold to enhance conductivity and performance.
-
Product
Push Back Probes (VF4) VF417B300G25
1007631
-
The Push Back Probes (VF4) VF417B300G25 is designed for precision applications, featuring a basic contact probe that ensures reliability and efficiency. This model supports a wide operational temperature range of -45°C to +100°C, making it suitable for various environments. It boasts a pitch measurement of 4.00 mm (157 mil), allowing for effective contact in diverse electronic setups.In terms of electrical specifications, the probe can handle a continuous current of 10.00 A with a typical contact resistance of just 30.00 mOhm, ensuring optimal performance under load. Mechanically, it features a preload of 300.00 cN and a robust spring force of 2500.00 cN, providing stability and accuracy with a nominal travel distance of 5.00 mm. The design also maintains a pointing accuracy of +/- 0.10 mm, ensuring precision in every application.
-
Product
Slotted And Loop Types
-
As a practical alternative to wire-wrap posts and turret terminals, loop and slotted test points are an economical choice for reliable test terminations. Allowing non-slip, safe circuit testing, terminals easily attach to J hooks, EZ hooks, grabbers, alligator clips, tips or probes. Space saving, ultra-low and low profile designs are available for high density PCB applications. High profile designs are also offered for difficult to reach applications.
-
Product
Loop Calibrator
Model KM CAL-904-MK1
-
Kusam Electrical Industries Limited
• 4-20mA (1kΩ Load, 24V Loop Output).• 0-20mA and 0-24mA output ranges.• 0.025% Basic Accuracy.• Auto Ramp and Step functions.• 0-100% output with percentage step option.• 0-24V DC voltage source.• Open loop and overload buzzer alarm.• Low battery indication.• Simple Operation Interface• Warning beeper when output is open• Pollution Degree 2.• Ambient temperature 0~40℃.• Power Consumption 150mA at 24V 1kΩ load
-
Product
Push Back Probes (VF3) HVF3
1004760
-
The Push Back Probes (VF3) HVF3 are critical components for a variety of electronic applications, ensuring reliable and efficient connections. Designed with precision, these probes measure a total length of 34 mm, with a press ring diameter of 2.70 mm and an outer diameter of 2.60 mm. This compact size allows them to fit seamlessly into tight spaces while maintaining optimal functionality. The collar height of 5.70 mm provides stability during use, making these probes a preferred choice for engineers and technicians alike.
-
Product
Push Back Probes (VF3) VF317B300G15
1010174
-
The Push Back Probe VF317B300G15 (item number 1010174) is designed to verify that terminals are correctly locked in connector housings. VF317B300G15 can verify that a terminal remains securely locked in the connector housing and is not pushed back beyond the permitted position during contacting.
-
Product
Closed Loop Hall Effect Current Sensors/Transducers
-
ChenYang Technologies GmbH & Co. KG
This Hall Effect current sensor is based on closed loop compensating principle and can be used for measurement of DC and AC current, pulse currents etc. The output of the transducer reflects the real wave of the current carrying conductor
-
Product
Push Back Probes (VF4) VF483B0010G20
1011473
-
The Push Back Probes (VF4) VF483B0010G20, also known as Basic Contact Probes, are essential tools designed for precise applications in various electronic setups. Engineered with a pitch of 4.00 mm (157 mil), these probes function effectively across a temperature range of -45°C to +100°C, making them suitable for a wide array of environments and complex tasks. The probes feature a robust design with a continuous current capacity of 10.00 A and a typical contact resistance of just 30 mOhm, ensuring reliable electrical connectivity and performance during usage.
-
Product
Push Back Probes (VF4) VF422B0001G15
1022238
-
The Push Back Probes (VF4) model VF422B0001G15 is engineered for precision in challenging temperature environments, with a remarkable operating range from -45°C to +100°C. This basic contact probe features an optimized pitch of 4.00 mm, ensuring effective electrical connectivity in various applications. Its design is tailored for rigorous use, exemplified by a continuous current rating of 10A and a low typical contact resistance of just 30 mOhm, making it ideal for high-performance settings where reliability and performance are paramount.
-
Product
Line Loop Tester
8455
-
Simpson?s Model 8455 Line Loop tester detects line shorts, opens and multiple ringers, DC voltages and loop resistance. It can measure DC voltage up to 100 volts and loop resistance to 2 megohms. A front panel ?reverse polarity? switch allows changing polarity positions quicker and easier than manually switching test leads when making line checks.
-
Product
Multi-Standard Local Loop Simulatorw/Optional AWGN Generator
458-LM-A1-30
-
FEATURES: Simulates 26 AWG PIC as specified in ANSI T1.417; Bandwidth DC to 30 MHz; Solution for ADSL, ADSL2, ADSL2+, & VDSL2 chip/modem/DSLAM testing;
-
Product
Push Back Probes VF10011B120G10
1013269
-
The VF100 Push Back Probes are precision-engineered tools designed to provide reliable and repeatable contact in various applications. Specifically, the VF100 model, indicated by the order code VF10011B120G10, combines robust performance with outstanding technical capabilities. Capable of operating within a temperature range of -45°C to +100°C, these basic contact probes are perfect for demanding environments, delivering consistent reliability under extreme conditions.
-
Product
Fuse Buddy Current Loop
307M/308B
-
*Just clamp your current probe over the loop to access the amperage draw through a fused circuit. *Easy testing access, plugs right into fuse socket, no more hand made adapters. *Testing range 0-30 Amps - Do Not Exceed 30 Amps
-
Product
Push Back Probes (VF4) VF416B230G20
1005240
-
The Push Back Probes (VF4) model VF416B230G20, with order code 1005240, is designed to enhance precision in electronic applications, ensuring reliable connectivity and performance under diverse operating conditions. With a temperature range of -45°C to +100°C, this basic contact probe is well-suited for environments requiring robustness and longevity, making it ideal for both industrial and consumer applications. Its compact design features a nominal travel of 5 mm, complemented by a maximum travel reach of 5.5 mm. This functionality is crucial for maintaining contact integrity across various assembly tasks.
-
Product
Push Back Probes (VF3) VF383B0008G05
1010202
-
The Push Back Probes (VF3) VF383B0008G05 is an essential tool designed for precision contact in various applications. With a compact design characterized by a pitch of 3.00 mm (118 mil), these probes operate efficiently in temperatures ranging from -45°C to +100°C, making them suitable for a wide range of environments. The critical functionality of the VF3 model is underscored by its continuous current capacity of 8.00 A and a typical contact resistance of just 30.00 mOhm, ensuring reliable performance and minimal signal loss in electrical applications.
