Product

Clamp type AC Current Sensor／for Power Monitor

ZCT-23S

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

ZCT-23S - MULTI MEASURING INSTRUMENTS Co., Ltd.

*Ultra compact size*AC 0.1A～120A*Current measurements of terminal feeder

Product

Precision Voltage and Current Sources

VI-700

-

IET Labs

VI-700 - IET Labs

The VI-700 Voltage and Current Source is a versatile precision dialable or remotely programmable voltage and current source. Its three ranges provide up to 20 V full scale (200 V with the HV option), and down to 100 mV resolution; and 20 mA full scale down to 0.1mA resolution. Both voltage and current outputs are available simultaneously. The output is set by a range selector and thumbwheel switches in the LOCAL mode, or by a digital input at the rear panel. The REMOTE mode control can be a RS232 or IEEE-488 interface.

Product

Current Probe With Hall Effect Technology

CP 35

-

GMC-I-PROSyS

CP 35 - GMC-I-PROSyS

The CP 35 current probe has been designed for use with oscilloscopes respectively for accurate, non-intrusive measurement of AC, DC and complex waveform currents.

Product

Hand-Held, Battery-Operated Multi-Frequency Eddy Current Instrument

US-454A

-

United Western Technologies Corp

US-454A - United Western Technologies Corp

The US-454A is a portable, hand-held, battery-operated multi-frequency eddy current instrument that can be connected to a laptop, PC and motion controllers for use in semi- or fully automatic data collection applications. Two encoder inputs enable position stamping of data. Pulse-on position input is ideal for motion control applications. Ethernet and USB capabilities allow instrument control along with time- and position-stamped data transfer to the client computer. Built from the rugged US-454 architecture, the US-454A offers single- and multi-frequency inspection, frequency mixing capabilities, enhanced signal-to-noise ratio, USB, Ethernet and data storage capability, and unprecedented digital strip chart data collection.

Product

Primary Current Injection Test Sets

-

T&R Test Equipment Ltd.

T&R Test Equipment Ltd.

Our primary current injection test sets cover from 750A through to 6000A. Available in single phase, testing applications include testing and timing of under and over current relays, circuit breakers and CT ratio testing.

Product

Automotive Current Tester LCD Display

77102

-

Gunson

77102 - Gunson

This automotive current tester with LCD display, plugs directly into the fuse box and can be used on mini, standard and maxi fuse connections. Blades may get hot during use and care should be taken for 2mins whilst they cool down. Fits mini and maxi fuses. Current range 0-80AMP. Safe and easy way to check automotive current.

Product

Eddy Current Sensor

eddyNCDT 3001

-

Micro-Epsilon Group

eddyNCDT 3001 - Micro-Epsilon Group

The eddyNCDT 3001 is a new, efficient eddy current sensor whose compact dimensions have to date only been reserved for inductive sensors and proximity sensors. The temperature-compensated design provides high stability even in fluctuating ambient temperatures. The eddyNCDT 3001 comes with integrated electronics, offering an outstanding price/performance ratio and easy operation. The eddyNCDT 3001 eddy current sensor is ideally suited to OEM integration and machine building applications. The sensor is factory-calibrated for ferromagnetic and non-ferromagnetic materials, which eliminates the need for field calibration of the sensor. The eddyNCDT 3001 is available with connector or with integrated cable. A robust design combined with the eddy current measuring principle enables measurements in harsh industrial environments (oil, pressure, dirt). In addition, the eddyNCDT 3001 is suitable for offshore/marine applications (salt water).

Product

High Frequency Current Transformer Clamps

HFCT-20HD & HFCT-60HD™

-

ndb Technologies Inc.

HFCT-20HD & HFCT-60HD™ - ndb Technologies Inc.

The HFCT-20HD™ and HFCT-60HD™ are high frequency current transformer sensors designed for partial discharge detection on electric apparatus’ ground returns. Made from superior quality materials, it is designed for any environment.

Product

Clamp type AC Current Sensor／for Power Monitor

ZCT-33S

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

ZCT-33S - MULTI MEASURING INSTRUMENTS Co., Ltd.

*Ultra compact size*AC 0.1A～150A*Current measurements of feeder

Product

Thin Film Current Sensing Chip Resistors

CSTN

-

RARA Electronics Corporation

CSTN - RARA Electronics Corporation

*Thin film process*High power rating up to 3 watts in 2512 size*Resistance values from 50m to 1ohm*High purity alumina substrate for high power dissipation*Power management applications*Switching power supply*Over current protection in audio applications*Voltage regulation module (VRM)*DC-DC converter, battery pack, charger, adaptor,*Automatic engine control*Disk drive

Product

Split type AC Current Sensor

CTF-5A

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

CTF-5A - MULTI MEASURING INSTRUMENTS Co., Ltd.

* Suitable for current measurements of terminal feeder. * Wire stopper is equipped for the slipping protection. * The special connector is not necessary as the output terminals are provided. * Open circuit protection and nonflammable plastic material.

Product

Clamp type AC Current Sensor／for Power Monitor

ZCT-40P

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

ZCT-40P - MULTI MEASURING INSTRUMENTS Co., Ltd.

*AC 0.1A～500A*Current measurements of feeder

Product

Primary Current Injection Test Set

T 2000

-

Doble Engineering

T 2000 - Doble Engineering

T 2000 is a portable current transformer test set which allows to perform many different measurements such as saturation, ratio and polarity tests and CT winding resistance test. Substation maintenance and commissioning test equipment, T 2000 is extremely appreciated by electrical engineers for its high accuracy and portability.

Product

Current Measuring Instruments

-

Testo AG

Testo AG

The testo 755 current/voltage testers are fast and easy to use, especially when you are testing many circuits. The convenient open-jaw current tester automatically turns on when voltage exceeds 6V. It then auto-selects the correct parameters and range for your test. These rugged testers are suitable for virtually all your daily electrical measuring tasks.

Product

Medical Leakage Current Tester

2675Y

-

Shenzhen Chuangxin Instruments Co., Ltd.

2675Y - Shenzhen Chuangxin Instruments Co., Ltd.

The 2675Y Medical Leakage Current Tester Series Is The Test Equipment Used For Measuring Continuous Leakage Current And Patient Auxiliary Current Of Medical Electrical Equipment.It Designs And Products According To The GB9706.1_2020 (IEC60601-1:2012) .And The Test Circuit (MD)Input Impedance To Simulate The Body Impedance,It Accord With The Requirements Of GB9706.1-2020 (IEC60601-1:2012),The Test Current Can Run Up To 5A,And Provide Users With An Isolation Power Supply Which Adjustable Output Voltage For 0~250V Continuously Of The Basic Capacity Configuration For The 500VA And Provide Another 110% Voltage Source Of The Maximum Rated Voltage.It Can Satisfy The I,II, Various Types Of Equipment Test The Earth Leakage Current,Shell Leakage Current,Patient Leakage Current,Patient Auxiliary Leakage Current Under Normal Condition And The Single Fault.

Product

Current Protection Relay

-

Mors Smitt Group

Mors Smitt Group

The main earth fault protection relays in distributions systems, power stations & large manufacturing / processing plants can fail to detect a high impedance break down to earth causing hazard to human life & potential damage to plant & equipment. In these & other situations demanding extra sensitive earth fault protection, using solid state techniques, can be applied to detect earth currents down to 0.5% of the CT nominal current.

Product

AC/DC Split Core Current Sensor CT1000S

-

Yokogawa Test&Measurement

Yokogawa Test&Measurement

This AC/DC split core current sensor is designed for measuring large DC and AC currents in applications such as electric vehicles, renewable energy systems, inverters, and motors. It facilitates high-current measurements by clamping around existing current connections. With its voltage output, this sensor is compatible with power analyzers (WT series and PX8000) and waveform measurement instruments (ScopeCorders and DLM series), making it a versatile tool for various high-current measurements.

Product

Clamp type AC Current Sensor／for Power Monitor

ZCT-23

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

ZCT-23 - MULTI MEASURING INSTRUMENTS Co., Ltd.

*Compact size*AC 0.1A～120A*Current measurements of terminal feeder