Product

Multifunction Voltage and Current Calibrator

MC140i

-

Powertek LLC

MC140i - Powertek LLC

Multifunction calibrator MC140i is ideal for calibration of voltmeters, ammeters, DMMs and panel meters. AC/DC voltage 1uV to 1000V. Current 50uA? to 1000A using test coil. Deviation control along readout. 0.0035% basic dc accuracy. 0.03% basic ac accuracy. Supplied with RS232 interfaces. UKAS/NIST Traceable

Product

DC Earth Leakage Current Measurement

DCZCT-11M

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

DCZCT-11M - MULTI MEASURING INSTRUMENTS Co., Ltd.

*DC Earth Leakage Current Measurement　　　　*Bipolar DC ±12V Power Supply*Output DC ±1.5V at DC 10mA　*Isolated Housing Case based on UL94V-0*Through Hole PCB Mount Type, Exciting Current Method

Product

Multiparameter Current Meters

MIDAS ECM

-

Teledyne Valeport Ltd,

MIDAS ECM - Teledyne Valeport Ltd,

The MIDAS ECM is one of only a few multiparameter current meters that allow real-time operations over several thousand metres of cable, as well as autonomous deployment.

Product

Current Probe For Non-Intrusive Measurement Of AC, DC, And Waveform Currents

CP 305

-

GMC-I-PROSyS

CP 305 - GMC-I-PROSyS

The CP 305 current probe has been designed for use with oscilloscopes respectively for accurate, non-intrusive measurement of AC, DC and complex waveform currents.Using advanced Hall Effect technology the CP 305 can measure currents accurately up to 450A peak over the frequency range of DC to 20 kHz.

Product

18 Inch Universal Flex Current Probe Accessory

FLIR TA74

-

Teledyne FLIR

FLIR TA74 - Teledyne FLIR

The FLIR TA74 adds capabilities, simplifies challenges, and gives you the best readings with your existing meter. The narrow, 18-inch long flexible coil clamp and locking mechanism allows you take measurements in tight or awkward spots – ideal for multiple conductor measurements, double-wrap requirements, and deeper access. The connection is a standard banana plug and the output is a voltage signal, so it’s compatible with most DMMs and clamp meters, regardless of brand.

Product

Zero Phase Current Transformer

MZL-30

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

MZL-30 - MULTI MEASURING INSTRUMENTS Co., Ltd.

Split-core type for measuring zero phase current

Product

Hand-Held, Battery-Operated Multi-Frequency Eddy Current Instrument

US-454A

-

United Western Technologies Corp

US-454A - United Western Technologies Corp

The US-454A is a portable, hand-held, battery-operated multi-frequency eddy current instrument that can be connected to a laptop, PC and motion controllers for use in semi- or fully automatic data collection applications. Two encoder inputs enable position stamping of data. Pulse-on position input is ideal for motion control applications. Ethernet and USB capabilities allow instrument control along with time- and position-stamped data transfer to the client computer. Built from the rugged US-454 architecture, the US-454A offers single- and multi-frequency inspection, frequency mixing capabilities, enhanced signal-to-noise ratio, USB, Ethernet and data storage capability, and unprecedented digital strip chart data collection.

Product

AC Current / Leakage Digital Clamp-on Tester

MCL-500DFN

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

MCL-500DFN - MULTI MEASURING INSTRUMENTS Co., Ltd.

MCL-500DFN AC Current / Leakage Digital Clamp-on Tester

Product

Clamp type AC Current Sensor／with DC Voltage Output

ACT-5H

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

ACT-5H - MULTI MEASURING INSTRUMENTS Co., Ltd.

*For current measurements of the control board*AC 0.1A～5A*DC 5V full scale output

Product

High Current DC Load

3350F Series

-

PRODIGIT Electronics Co, Ltd.

3350F Series - PRODIGIT Electronics Co, Ltd.

3350F has its own control and display panel, CC/CR/CV/CP/Dynamic modes, 150 sets Store/Recall memory which provides load set-up more efficiently, also can be remote controlled via GPIB, RS232、USB and LAN interface.

Product

Digital Ior Leakage Current Clamp Tester

MCL-400IR+

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

MCL-400IR+ - MULTI MEASURING INSTRUMENTS Co., Ltd.

・About Ior Leakage CurrentRecently, the leakage current clamp meter is widely used for insulation control of low voltage circuit as the supplementary method of the insulation resistance measurement. The control of leakage current has the advantages to enable the prediction of insulation condition in the electrical power line without having to shut off the power. The leakage current (Io) includes the capacitive leakage current (Ioc)originated in the capacitance and the resistive leakage current (Ior) originated in the insulation resistance each related to the ground. It is considered that the measurement of resistive leakage current (Ior) is the very useful and effective method for the insulation control of low voltage circuit. However, it was difficult to measure the resistive leakage current (Ior)with traditional leakage current clamp meter. MCL-400IR new digital clamp tester enabled the measurements of the resistive leakage current (Ior)without voltage input(phase detection).

Product

Four Channel Low-Noise DC Bias Card

PI-41702

-

Pulse Instruments

PI-41702 - Pulse Instruments

The PI-41702 is a four channel bipolar DC Bias supply that can provide an output current up to 100 mA per channel. The output voltage ranges from –8 V to +8 V, and this card has special filter circuitry to reduce the output noise for those applications that require a low noise bias output. Additionally there is a ‘D’ type connector that allows the introduction of laboratory type supplies to reduce the noise further. To change from using the internal power supplies to external power supplies requires repositioning jumpers. The PI-41702 also has voltage and current sense for remote measurement of the voltage and current levels.

Product

Ocean Current

-

Onset

Onset

Designed for long-term, high-accuracy monitoring of water quality, temperature, salinity, and water levels in oceans, coastal waters, and tidal areas.

Product

Current Logger Sensor

NUL-202

-

Neulog

NUL-202 - Neulog

This sensor can be used to measure the current in parallel or series branches of low voltage AC and DC circuits and also to investigate the dependence of the current flow through components on the voltage across them.

Product

Eddy Current Testing

MIZ-200

-

Zetec, Inc.

MIZ-200 - Zetec, Inc.

The MIZ-200 eddy current instrument can handle the most demanding environments with ease. Offered in both tubing and surface array configurations, MIZ-200 is ideal for applications within Balance-of-Plant/Power Generation, Transportation and Oil and Gas markets.

Product

Through Hole type DC Current Sensor／for DC Leakage Current Measurements

DCZCT-20MH

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

DCZCT-20MH - MULTI MEASURING INSTRUMENTS Co., Ltd.

*DC earth fault measurement for solar power system*Least affection from the magnetization of core and temperature fluctuation*DC leakage current measurements*Convenient ＋5V single polarity power supply

Product

Through Hole type AC Current Sensor

CT-6K

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

CT-6K - MULTI MEASURING INSTRUMENTS Co., Ltd.

For measuring current generally (through hole type)

Product

Primary Current Injection Test Set

T 3000

-

Doble Engineering

T 3000 - Doble Engineering

T 3000 is a primary current injection testing system designed to perform primary tests requested in substations commissioning. It allows to perform different tests and measurements on current transformers, voltage transformers, power transformers, protection relays, energy meters and transducers

Product

Current Integrated Sources

CIS

-

MeterTest Ltd.

CIS - MeterTest Ltd.

The CIS current integrated source was designed to provide a stable alternating current source for the electricity meter test equipment, and in laboratories. The output current is isolated and independent from the mains voltage. Different CIS versions are available depending upon the values of output power and output current required.

Product

Flexible Current Sensor Probe

CTA

-

Powertek LLC

CTA - Powertek LLC

The CTA current sensors convert ac current to an isolated 0-5A current with available ranges from 100A to 10,000A. Because the current sensors are flexible split core, installation is possible without shutting down the LV electrical supply, avoiding expensive down-time costs. Typical applications are retrospective energy monitoring in factories, offices buildings, process control data logging systems, where power, energy and current monitoring is important. Typical applications are factories, offices buildings, ac/dc VFD drives, welding, power conversion and power distribution. For all CTA current sensor models, a NIST/NPL (UKAS) traceable calibration certificate and certificate of conformance is supplied. All CTA sensors use UL94V0 or CSA approved materials. The CTA flexible current sensors are suited to permanent or semi permanent installation. The coil sensor is durable, lightweight, flexible and will easily clip-around a power cable. The 5A output from the CTA current sensor connects direct to installed metering, rotary metering or current transducers.

Product

Current Measurement in a Compact Design

ICD-Series

-

Isabellenhütte Heusler GmbH & Co. KG

ICD-Series - Isabellenhütte Heusler GmbH & Co. KG

The ICD series is a compact system for current measurement. The ICD-A is suitable for an application in the automotive industry due to its connector, while the ICD-C is more suitable for the design industry. The shunt-based measurement provides for a high level of accuracy and temperature compensation is also incorporated through the internal signal processing. External temperature influences are thus reduced to a minimum.