Product

SolarIV Series Solar Cell Current Voltage Measurement System

SlarIV

-

ZOLIX

SlarIV - ZOLIX

SolarIV IntroductionOne of the key measurements needed for photovoltaic devices in the measurement of their I-V characteristics. Through measuring the I-V curves the user can determine physical performances of devices such as photo-electric conversion efficiency, fill factors and so on. Such data is important for reliable work in research and quality inspection. ZOLIX supply the SolarIV system and the most perfect, professional technical support.

Product

- RS-232 to Current Loop Converter

Model 65A

-

Telebyte, Inc.

Model 65A - Telebyte, Inc.

FEATURES: Active/Passive Loops; 20 or 60 mA. Operation; DC To 19.2 KBPS; Half/Full Duplex; Optically Isolated; DTE/DCE Selectable. The Model 65A is a small, versatile, RS-232 to Current Loop Converters for use with teletypes or computers providing local terminal input via a 20mA. (or 60 ma.) current loop. The Model 65 includes a wall mounted transformer and internal power supply circuitry.

Product

RF Bias Burn-In System

-

Accel-RF Corporation

Accel-RF Corporation

These systems deliver an unbeatable combination of advantages over a wide range of RF frequencies and power levels. The Automated Multi-Channel RF-Biased Burn-In Test System is a turnkey system that incorporates all of the capability needed for accelerated aging and parametric testing of RF semiconductor devices. Its powerful software elegantly supports data acquisition, storage, and presentation. Accel RF’s customers choose system features to meet their technical needs and capital budget. In addition to cost savings, use of Accel-RF’s solutions accelerate product time-to-market, saving many months of product development.

Product

Eddy Current Data Acquisition Unit

MIZ-80iD

-

Zetec, Inc.

MIZ-80iD - Zetec, Inc.

The MIZ-80iD is an all-in-one integrated eddy current instrument, probe pusher, and control system that has transformed the way eddy current data is obtained.

Product

Calibrator, Calibrated w/D & U, Current, 185 mm, 78 mm, 38 mm

72-6694 CAL DU

-

Tenma

72-6694 CAL DU - Tenma

The 72-6694 CAL DU from Tenma is a current calibrator. It provides quality and accuracy of handheld calibrator of precision current source. It features large LCD display (maximum display counts 1999, 13mm (0.5") digit size). The current calibrator has 006P DC 9V, MN1604/PP3 battery or equivalent alkaline type or heavy duty type power supply. The dimension is 185mm × 78mm × 38mm (7.3" × 3" × 1.5") and weight is 265g/0.58lb (including battery). It has adjustable 0 to 24mA current source, 2 ranges (0 to 19.99mA (0.01mA display resolution, ±(0.25% FS + 1d) accuracy), 0 to 24mA (0.1mA display resolution, ±(0.5% FS + 1d) accuracy).

Product

Split Core Hall Effect DC Current Sensor

CYHCT-C2TC

-

ChenYang Technologies GmbH & Co. KG

CYHCT-C2TC - ChenYang Technologies GmbH & Co. KG

This Hall Effect current sensor is based on open loop principle and designed with a split core and a high galvanic isolation between primary conductor and secondary circuit. It can be used formeasurement of DC current etc. The output of the transducer reflects the real wave of the current carrying conductor.

Product

Through Hole Type AC Current Sensor

CTA-120A

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

CTA-120A - MULTI MEASURING INSTRUMENTS Co., Ltd.

*For AC current and power measurements.*High accuracy and compact size.*Wide measuring range:AC 1A～120A.

Product

SMART Constant Current DC Load Banks

SLB-Series

-

Eagle Eye Power Solutions

SLB-Series - Eagle Eye Power Solutions

SMART Constant Current DC Load Banks are designed for acceptance testing, discharge testing, battery capacity testing, battery maintenance, engineering examination and other testing for DC power with load. The SMART technology allows a constant current discharge without the need for manual adjustment of current during the discharge test. Our SLB-Series load banks are portable, durable, economic, safe, easy-to-use and come complete with our DataView software, providing the user with a complete data management and analysis program.

Product

Split-Core Current Transformers

CTS Series

-

Continental Control Systems LLC

CTS Series - Continental Control Systems LLC

The CTS series CTs are available with windows from 0.75 inch up to 2.0 inch. They have a removable section, so that they can be installed without interrupting the circuit. 0.333 Vac output at rated current Accuracy ±1% from 10% to 100% of rated current Phase angle <2° degrees at 50% of rated current (valid for 70 A or higher) 8 ft. twisted-pair wire, 600 Vac rated UL recognized for voltages up to 600 Vac, CE mark, RoHS

Product

Single-point Current Meter

-

Aanderaa Data Instruments AS

Aanderaa Data Instruments AS

The SEAGUARD® is the core module used in small and medium sized underwater observatories. Whether used as a multipurpose instrument, or as a hub for strings in the water column, the SeaGuard manages connected sensors and the real-time communication of data and meta-data to shore. In autonomous configurations, long battery life is achieved with aggressive power routines keeping the full system at the lowest power levels possible.

Product

Primary & Secondary Current Injection Testing Sets

-

Technology Products

Technology Products

Primary current injection kits are used to test and commission Circuit Breakers, Bus Bars, CTs, Relays, MCCs, PCCs etc. These are also used for high current injection and simultaneously measuring voltage drops and hot spots in bus-bar joints, Circuit Breaker Contacts etc.

Product

Schottky Zero Bias Detectors

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

Schottky Zero Bias Detectors from Pasternack

Product

Precision Voltage and Current Sources

VI-700

-

IET Labs

VI-700 - IET Labs

The VI-700 Voltage and Current Source is a versatile precision dialable or remotely programmable voltage and current source. Its three ranges provide up to 20 V full scale (200 V with the HV option), and down to 100 mV resolution; and 20 mA full scale down to 0.1mA resolution. Both voltage and current outputs are available simultaneously. The output is set by a range selector and thumbwheel switches in the LOCAL mode, or by a digital input at the rear panel. The REMOTE mode control can be a RS232 or IEEE-488 interface.

Product

Eddy Current Testing Instruments

INSITE HT & CT

-

Zetec, Inc.

INSITE HT & CT - Zetec, Inc.

The Zetec InSite HT and InSite CT are multi-channel, multi-frequency eddy current testing instruments. They are both designed to operate at full production line speeds in tough manufacturing environments. Both the InSite HT and InSite CT are available in 2, 4, and 8 channel versions.

Product

High Current Electronic Load (600W-1200W)

ELCH600 & ELCH1200

-

Aplab Limited

ELCH600 & ELCH1200 - Aplab Limited

- Low lead resistance <5m Ohm for Fuel-cell- Battery Testing- VFD display- High resolution 0.1mA/1mV- Voltage range 0V to 500V- Working mode CV/CC/CW/CR- OV/OC/OP/OT protection- Communication: USB/RS232/GPIB

Product

Bias Network, 100 MHz to 12.4 GHz

11590B

-

Keysight Technologies

11590B - Keysight Technologies

The Keysight 11590B broadband high power bias networks can be used in a wide variety of biasing applications for test and measurement requirements in laboratory and production environments. Bias networks provide the means of supplying DC bias to the center conductor of the coax connector for your device while blocking the DC to the RF port.

Product

SparkFun Current Sensor Breakout

ACS723 (Low Current)

-

SparkFun Electronics

ACS723 (Low Current) - SparkFun Electronics

The low current version of the SparkFun Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for low to moderate AC and DC current sensing applications. The ACS723 sensor uses a Hall effect sensor to output a voltage relative to the current flowing through the IP+ and IP- pins on the board. The advantage of using a Hall effect sensor, specifically, is that the circuit being sensed and the circuit reading the sensor are electrically isolated meaning that, although your Arduino is running on 5V, the sensed circuit can be operating at higher DC or AC voltages!

Product

Programmable ProBus Current Adapter

CA10

-

Teledyne LeCroy

CA10 - Teledyne LeCroy

The CA10 is a programmable and customizable interface device that seamlessly incorporates third party current transducers/transformers with Teledyne LeCroy oscilloscopes or motor drive analyzers. It allows the third party device to be recognized and operate as if it were a Teledyne LeCroy probe.

Product

Closed Loop Hall Effect Current Sensors/Transducerswith Rectangle Windows

-

ChenYang Technologies GmbH & Co. KG

ChenYang Technologies GmbH & Co. KG

This Hall Effect current sensor is based on closed loop compensating principle and can be used formeasurement of DC and AC current, pulse currents etc. The output of the transducer reflects thereal wave of the current carrying conductor.

Product

Clamp on AC Leakage Current Sensors

-

MEWOI Electronics Co.,ltd

MEWOI Electronics Co.,ltd

High Accuracy Clamp AC Leakage Sensor use permalloy magnetic cores, with small size, high accuracy, good stability, strong anti-interference ability characteristics. It is applied with double shield technology, which insure strong anti-interference ability.

Product

Leakage Current Tester

-

Sivananda Electronics

Sivananda Electronics

Test Voltage : - 1V to 500V DC settableAccuracy : ± 1% of set Value ± 1digitLeakage Current : - Accuracy - ± 0.5% ± 1digitDigital Model – 19.99μA / 199.9 μA / 1.999mA / 19.99mAAnalog Model - 10μA /25μA/100 μA/1mA/2.5mA/10mASeparate Indication for Charge / Measure and Discharge modeAvailable in Digital Version Also

Product

Split type AC Current Transformer

CTF-400T

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

CTF-400T - MULTI MEASURING INSTRUMENTS Co., Ltd.

*1A output for metering application.*Wire stopper is equipped for the slipping protection.*The special connector is not necessary as the output terminals are provided.*Open circuit protection and nonflammable plastic material.