Showing results: 136 - 150 of 280 items found.
-
Aidiga Ltd.
Sampling frequency: 8 000 - 192 000 HzVertical resolution: 16 bitSound card selection: YESChannels count: 2Channels modes: independent, I master - II slave, II master - I slaveMath: Ch1=Ch1+Ch2; Ch1=Ch1-Ch2; Ch2=Ch2+Ch1; Ch2=Ch2-Ch1Signal reconstruction: YESPretrigger: YESTrigger events: above, below, free runInternal trigger: YESExternal trigger: two channel mode - NO, single channel mode - YESData visualisation modes: single, continuous displayFFT points count: 8 - 2 097 152FFT Window functions: Rectangular, Gauss, Hamming, Hann, Bartlett, Triangular, Bartlett-Hann, Blackman, Nutall, Blackman-Harris, Blackman-Nutall, Flat TopOscilloscope amplitude axis units of measurement: Volts (nV...kV), Sample Value (smp)
-
ROM-Elektronik GmbH
Attenuators are used to extend the measuring ranges of our high-frequency measuring devices HFA-3, HFR-4 and Frequency Master IV. They are suitable for measuring higher levels.The measuring range of our high-frequency measuring devices HFA-3, HFR-4 and Frequency Master IV can be adjusted upwards using external attenuators. Available attenuators are 10 dB and 20 dB. The 10 dB attenuator extends the measurement range upwards by a factor of 10 (10x higher radiation level) and the 20 dB attenuator extends the measurement range upwards by a factor of 100 (100x higher radiation level). The attenuators are simply screwed between the antenna and the measuring device.In addition to our high-frequency filter MFF-1, there are also special filters that cover frequency ranges that the MFF-1 does not. Please ask us about your special requirements.
-
DMC-3425 -
Galil Motion Control, Inc.
The DMC-3425 is the first product in Galil's new E-Series line designed specifically for Ethernet-based distributed systems. The DMC-3425 provides a highly versatile and powerful form of distributed control where multiple DMC-3425 controllers are linked together. When linked, one DMC-3425 is designated as the master over the other DMC-3425 controllers in the distributed system.
-
Connii MM 2.0 -
telos EDV Systementwicklung GmbH
Connii MM 2.0 is a small, compact, easy-to-use solution for a PC driven I2C transmitter and receiver. The I2C interface works as an I2C multimaster device. Thus, it is able to drive buses running multiple I2C bus masters. Additionally, Connii MM 2.0 is a limited I2C monitor for traffic up to 400kHz.
-
NL120 Series -
EKSPLA uab
NL120 series electro-optically Q-switched nanosecond Nd:YAG lasers provide up to 10 J per pulse with excellent stability. The innovative, diode‑pumped, self‑seeded master oscillator design results in Single Longitudinal Mode (SLM) output without the use of expensive narrow linewidth seed diodes and cavity‑locking electronics.
-
EOS-204 -
Hangzhou Softel Optic Co., Ltd.
EOS-204 is the EOC slave based on HomePlug AV solution for Ethernet access over coax. It works together with EOC master which is based on HomePlug AV solution as well to construct a two-layer Ethernet data transmission channel on CATV coax cable, provide the Ethernet access service based on the existing coax cable networking.
-
Anritsu Corporation
Wireless VNA Master + Spectrum Analyzer, the industry's broadest frequency handheld solution to address cable, antenna, component and signal analysis needs in the field: with frequency coverage from 5 kHz to 6/20 GHz.
-
East Coast DataCom, Inc.
The Modem Sharing Devices are designed to allow RS-232 DTE (terminal) devices to share Leased Line and Dial line Modems or DSU's. Data arriving at the Master Port is continually broadcast to all Subchannels. The attached terminal device that raises the RTS control signal is automatically given control of the MSD. Data rates of up to 128 Kbps are supported.
-
VM-USB -
W-IE-NE-R, Plein & Baus GmbH
The VM-USB is a VME master with high speed USB2 interface. Enhanced functionality is given by the programmable internal FPGA logic which provides a VME command sequencer with 4kB stack and 28kB data buffer. Combined with the 4 front panel I/O ports this allows VME operation and data acquisition / buffering without any PC or USB activity.
-
HORIBA, Ltd.
HORIBA Scientific’s diffraction gratings are found in cutting-edge scientific applications including ultrafast and highenergy lasers, space flight instruments, astronomy, and synchrotron spectrometers.HORIBA’s scientific gratings are either masters or replicas, depending on the application. HORIBA Scientific also produces custom diffraction gratings, which can be specified according to our customers’ unique technical requirements.
-
National Technical Systems
Are you preparing to release a new computer product? NTS can exercise your product’s functionality throughout the entire development cycle – alpha, beta and/or golden master phases of development. NTS can start by developing comprehensive test plans and detailed test methodologies or you can supply us with a specific test plan to execute on your behalf.
-
EOCM-7101 -
Hangzhou Softel Optic Co., Ltd.
*EOCM-7101 is the outdoor EOC Master of the EOC (Ethernet Over Coaxial) solution. It is in compliant with HomePlug AV standard.*The EOCM-7101 have one EOC module. It provide one TV input, one com output and two 10/100/1000M auto-negotiation uplink ports.*It offers the high-speed data service to the customer based on the coaxial cable network.
-
TA-6 -
Tech-Aid Products
A universal master HDG/OBS selector panel with heading synchro transmitter, To/From meter and precision track selector. This panel requires a customer supplied RMI. Panel test jacks allow for external use of both the Hdg transmitter and precision resolver. This standard panel will allow by the book testing and mates directly with TA-5. Click on picture for larger view.
-
ifm efector, inc.
The range of fieldbus components offered by ifm includes gateways, IO-Link masters, RFID evaluation units and encoders. Gateways establish the connection between AS-i and common fieldbus systems such as EtherNet/IP, Profibus, Profinet or EtherCAT. They control the data exchange to the sensor/actuator level and communicate rapidly with the superior control level. Variants with PLC functionality or fail-safe PLC are available.
-
MTI Corp.
compact manually-operated machine for disassembling cylinder cases in the battery R&D lab. The compact body design allows easy operation inside a glove box to preserve & prevent the electrolyte and active materials from contamination during case disassembling. Simple operation with a safety protection cover allows customers to master the disassembling procedure within 5 minutes.