Product

Spectral Irradiance / Illuminance Calibration Standards

-

Gigahertz-Optik GmbH

Gigahertz-Optik GmbH

Standard lamps calibrated in illuminance and spectral irradiance. Traceable calibrations in the wavelength range from 200 nm to 2500 nm.

Product

Standard In-door Forward Optical Receiver

ONR-8636

-

Hangzhou Huatai Optic Tech. Co., Ltd.

ONR-8636 - Hangzhou Huatai Optic Tech. Co., Ltd.

ONR-8636 with standard configuration is a type of high index and universal in-door forward optical receiver. It adopts Philip optical receiving module. End-grade adopts power-doubling module. Optical connectors and RF connector can be installed at the front panel or back panel.

Product

"Standard" RF Low Pass Filters

-

Coaxial Dynamics

Coaxial Dynamics

Coaxial Dynamics "Standard" line of RF Low Pass Filters offers several models to choose from at CW power ratings of 100 watts and 200 watts. These filters cover operating frequencies from 88 MHz to 400 MHz with less than 0.5 dB insertion loss and attenuation levels of 40, 50 and 60 dB.

Product

Standard Transmitter

Tipix 2200

-

IRIS Instruments

Tipix 2200 - IRIS Instruments

The TIPIX 2200 is a transmitter purposely designed for deep Induced Polarisation or Resistivity sounding investigations. This transmitter is generally used together with V-Fullwavers or Elrec Pro receivers. This entry-level instrument has been designed for an ease of use and for a good productivity together with a strong protection against misuse. This very robust device has proven to be reliable even in very cold weather (up to -40°C) or in wet environment. It is able to inject up to 2200W in the soil and to inject up to 13A, so that it is suitable, even on conductive soils, to measure resistivity and IP at medium range depths. It is powered by standard generator.

Product

Open Standard Module (OSM)

ROM-2620

-

Advantech Co. Ltd.

ROM-2620 - Advantech Co. Ltd.

Advantech ROM-2620 OSM 1.1 Computer-on-Module is powered by NXP i.MX 8ULP SoC which includes up to 2 Arm Cortex-A35 cores in combination with one Cortex-M33 real timeprocessor and Vivante GC7000 nanoULTRA/GC328 graphics engine. It provides USB2.0, Fast Ethernet, MIPI-CSI, I2C, SPI, GPIO, PWM and MIPI DSI display for embedded applications

Product

Standard Parameters for Analysis

C-Cell Mono

-

Calibre

C-Cell Mono - Calibre

C-Cell Mono is the original system and comes with the standard parameters for analysis. C-Cell Mono takes 1 image of the sample to produce analytical results such as crust wall thickness, size, shape and location. C-Cell Mono is the entry level model of the C-Cell range and offers all the basic image analysis needs for a baker.

Product

Standard Signal Isolating Amplifier

-

Knick Elektronische Messgeräte GmbH & Co. KG.

Knick Elektronische Messgeräte GmbH & Co. KG.

Isolation and conversion of standard signals. Calibrated switchable inputs and outputs 0/4 ... 20 mA and 0 ... 10 V signal duplicator with two electrically isolated outputs.

Product

Additional Products: Standard Voltage 9 Pin D-Type Connectors

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connectors below are not compatible with Pickering products, however, are offered for developing a connection solution for use with other products.

Product

Standard Attitude Gyroscopes

5000B-series

-

Sigma Tek, Inc.

5000B-series - Sigma Tek, Inc.

The 5000B is an air-driven gyro that has a pictorial horizon mask and fixed airplane. The mask moves to indicate climb, dive, and bank. Bank and pitch attitudes are displayed so that the pilot’s sensing of the gyro indication is the same as the interpretation of the relation between the wings of the aircraft and the natural horizon during visual flight.

Product

Spectral Radiance / Luminance Calibration Standards

-

Gigahertz-Optik GmbH

Gigahertz-Optik GmbH

Standard lamps calibrated in luminance and spectral radiance. Traceable calibrations in the wavelength range from 250 nm to 2500 nm.

Product

Standard 1.08 (31.00) - 4.00 (114.00) Long Travel Bead Probe

BPLT-25C-4

-

ECT

BPLT-25C-4 - ECT

Current Rating (Amps): 8Average Probe Resistance (mOhm): 8Test Center (mil): 100Test Center (mm): 2.54Full Travel (mil): 350Full Travel (mm): 8.89Recommended Travel (mil): 317Recommended Travel (mm): 8.05Mechanical Life (no of cycles): 500,000Overall Length (mil): 1,460Overall Length (mm): 37.08Full Travel Remark: Standard Spring: 400 mil / 10,16 mm, Alternate Spring 400 mil / 10,16 mm, High Spring: 400 mil / 10,16 mm, Ultra High Spring: 350 mil / 8,89 mm

Product

Individual UPC Bar Code Standards

-

Applied Image, Inc.

Applied Image, Inc.

The UPC Verification Calibration standards are a unique set of symbols that assures an exact and reliable primary bar code standard exists for UPC codes based on ANSI X3.182/ISO 15416 methodology. These standards assures that manufactures of verification equipment, scanners, QC labs and end users now have an accurate basis for checking the measurement capabilities of their equipment. These standards are intended as a fundamental calibration tool for an QC program, providing a continuous scale from best to worse case characteristics of each parameter. With complete NIST traceable data supplied, it is ideally suited to those requiring traceability, such as ISO certification. Each symbol is individually calibrated to ANSI X3.182/ISO 15416 standards using a custom built microdensitometer. These cards are supplied calibrated for use with a 6 mil scan aperture and 660nm wavelength. (calibration wit other aperture sizes or wavelengths is available)

Product

Standard Probe Station Chucks & Accessories

-

ABET Technologies, Inc.

ABET Technologies, Inc.

In this test solutions section of our website we describe the expanding line of Abet PV IV probe stations for the growing variety of solar cell types and sizes being developed around the world. This page describes a line of vacuum chucks and accessories for top/bottom, top/top, and bottom/bottom solar cells from 3 x 3 mm to 300 x 300 mm. Probe stations for multiple device on a single substrate and multifunction probe stations are described further in the sections highlighted to the left of this page.

Product

Standard Method Compliant

-

Shimadzu Corp.

Shimadzu Corp.

Shimadzu System GC Analyzers are built and tested to meet the specific analysis requirements of applicable industry standards.

Product

Standard Flexiforce Sensors for Force Measurement

FlexiForce

-

Tekscan, Inc.

FlexiForce - Tekscan, Inc.

FlexiForce force sensors are ultra-thin and flexible printed circuits, which can be easily integrated into force measurement applications. These sensors are available for purchase in our online store.

Product

SF6 Filled High Precision Standard Capacitors

YL Series

-

Shanghai Jiu Zhi Electric Co., Ltd.

YL Series - Shanghai Jiu Zhi Electric Co., Ltd.

The SF6 insulated standard capacitor is used as Capacitance standard in measuring bridge Circuits to measure the dielectric dissipation Factor tanδ of all types including cables, capacitors, bushings, instrument transformers and power transformers. Further-more, It can be used as high-voltage capacitor for voltage divider circuits of high-voltage transformer test.