Terahertz Spectrometers
-
-
Product
Flash Photolysis Spectrometer
-
Vernier Software & Technology, LLC
The Vernier Flash Photolysis Spectrometer is a simple, user-friendly device for demonstrating the fundamental principles of chemical kinetics and photochemistry to undergraduate chemistry students.
-
Product
Terahertz imaging cameras
-
The detectors are fabricated with a GaAs high-mobility heterostructure in the standard semiconductor cycle using conventional optical lithography. The imaging sensor is manufactured on a single wafer. That process ensures high homogeneity and reproducibility of the plasmonic detector parameters (pixel-to-pixel deviation responsivity is within a 20- percent range). Each detector unit has a room-temperature responsivity up to 50 kV/W with read-out circuitry and noise-equivalent power of 1 nW/\sqrt{\rm{Hz}} in the frequency range 10 GHz — 1 THz. The detection mechanism is based on excitation of plasma oscillations in a two-dimensional electron system with subsequent rectification. The rectification takes place on special defects made in the electron system.
-
Product
Laboratory Spectrometers
M Series
-
Current generation M4000 spectrometers truly represent evolved technology. They represent over two decades of product development, incorporating many of the features that allow our high performance dedicated analyzers to achieve low ppb detection levels in complex gas matrices.
-
Product
High-resolution Spectrometer
HR4000
-
Our next-generation high-resolution spectrometer is a novel combination of optics and electronics that is ideal for applications such as characterizing lasers, measuring gas absorbance, and determining atomic emission lines.
-
Product
Mass Spectrometers
-
Our wide range of powerful, versatile, and proven mass spectrometry-based solutions deliver a new level of understanding and control in vacuum and gas-related applications to customers.
-
Product
Gas Chromatograph Mass Spectrometer
GCMS-QP2010 SE
-
The Shimadzu single quadrupole GCMS-QP2010 SE gas chromatograph-mass spectrometer offers reliable, cost-effective productivity for the most challenging laboratory analyses, such as environmental and energy.
-
Product
Spectrometer - OSA
-
HighFinesse optical spectrometers LSA and HDSA are designed to analyse the multi-line or broadband spectrum of (un-)known light sources like cw and pulsed lasers, gas discharge lamps, super luminescence diodes, semiconductor laser diodes and LEDs. They are suitable to analyze the spectrum of telecom signals, resolve Fabry-Perot modes of a gain chip, and produce a spectral measurement of gas absorption.
-
Product
NMR and MRI Spectrometer Consoles
Kea
-
Significantly improves performance and extends the frequency range of our signature NMR spectrometer line.
-
Product
High Performance Raman Spectrometer
-
Combining volume phase holographic (VPH) grating, wavelength optimized optics and deep-cooled CCD camera, Zolix is proud to present stateof-the-art Omni-iSpecT Raman spectrograph. It solves two essential problems concerned with Raman spectroscopy, speed and sensitivity. VPH spectrograph allows you to have faster acquisition and better S/N ratio, it is ideal for low light Raman applications such as remote detection, ultra fast Raman mapping etc, its lens-based design delivers minimum distortion at focal plane and ensures best image quality, which gives you high resolution and large spectral range simultaneously, also perfect image quality is ideal for multi-channel applications without cross-talking. The Omni-iSpecT's rugged and compact design make an ideal module for in-the-field and industrial applications; It is still suitable for academic research with research-grade performance; The Omni-iSpecT also provides the SDK file for secondary development.
-
Product
Optical Emission Spectrometer
PDA-7000
-
Emission spectrometry provides rapid and accurate simultaneous determination of many elements in metals. This technique has been adopted as standard method for metal analysis. The Shimadzu PDA-7000 is high performance optical emission spectrometers, utilizing the PDA method as standard, which enhances the accuracy and reliability of analysis. The PDA method, combined with excellent hardware quality, make the PDA-7000 suitable for any application in metal analysis. They enhance analysis productivity in quality control and process control in the ferrous and non-ferrous metal industries.
-
Product
SFG Spectrometer
-
Ideal laser spectroscopy tool for in-situ investigation of surfaces and interfaces. SFG spectrometer operates from 4300 to 625 cm-1 and provides < 6 cm-1 spectral resolution. The heart of the system is a picosecond Nd:YAG laser generating 25 ps pulses that pump an OPG/DFG delivering from 260 to 20 µJ per pulse across the IR range
-
Product
Highest SNR PDA Miniature Spectrometer
VS70-PDA
-
VS70-PDA OEM Photodiode Array Spectrometer is a high performance compact fiber coupled spectrometer covering wide spectral range of 200 to 1000 nm. This VS70 system for industrial applications uses a modified VS70 optical engine with Horiba’s type-IV Aberration-Corrected Flat-Field Holographic Ion-Etched concave grating optimized for UV-VIS and a linear photodiode array.
-
Product
MALDI-TOF & TOF/TOF mass spectrometers
-
Bruker''s FLEX series is a market leading technology platform - well-known for outstanding performance, reliability, convenience and innovative design. Its gold standard in Protein Sequence, MALDI Imaging and Polymer Analysis offer a wide range of capabilities matching any laboratory''s needs from expert users to beginners.
-
Product
Fluorescence Spectrometers
-
Our experience and expertise as manufacturers of fluorescence spectrometers is second to none. Spanning more than 50 years, we have over 1000 high-end spectrometers installed in universities and leading research laboratories worldwide. Our sales team would be delighted to assist you with your fluorescence spectroscopy analysis and instrumentation requirements.
-
Product
Terahertz Spectroscopy Solutions
STRIPP Control IM
-
Teratonics offers innovative solutions for contactless non-destructive testing and imaging inside dielectric materials and on coated metallic surfaces. Based on the patented technology and our profound know how on its application, we offer: ► Instruments for product and process control as well as for inspection with automated evaluation ► Laboratory services for industrial R&D, fatigue tests, maintenance, end of life studies
-
Product
Fiber Optic FT-NIR Spectrometer
QuasIR™ 2000
-
The QuasIR™ 2000 Portable Fiber Optic FT-NIR Near Infrared Spectrometer was designed from the ground up to offer the industry a new kind of NIR analysis solution – a solution that brings together the portability required to move NIR analysis closer to point-of-need, combined with unmatched spectroscopic performance for the fastest and most accurate results.
-
Product
Spectrometer
LSCM
-
This device performs high-speed measurement and sorting of LED electrical and optical characteristics while synched with control signals from the LED production line inspection and sorting system. The LSCM then provides that pass/fail information to the system. The LSCM is equipped with the function to test both electrical and optical characteristics by applied voltage and current to the LED. This test device was designed to integrate test functions required by the inspection and sorting system into one compact body.
-
Product
Spectrometer Module
Jaz Series
-
The Jaz spectrometer brings you an unparalleled level of flexibility. Its unique features and expandable platform make it a good choice for applications in the lab or in the field, including greenhouse lighting monitoring, remote sensing, process flow, quality assurance, life sciences and many others. Our customers have taken Jaz to wheat fields to detect blight infection, to Mt. Everest to measure UV intensity, and to Greek islands to measure reproductive success of orchids.
-
Product
Dual-Channel Spectrometers
-
Sometimes a single-channel spectrometer is not enough, for example, when you want higher resolution or perform two redundant measurements simultaneously. The AvaSpec dual-channel spectrometers are designed specifically for this purpose. Each spectrometer can be configured independently. The dual-channel can be equipped with two AvaSpec-ULS2048CL or two AvaSpec-ULS4096CL spectrometers.
-
Product
Raman Spectrometer - Confocal Raman Microscope
XploRA™ PLUS
-
Incorporating unique and powerful functions in a reliable, high performance system, ideally suited to the research and analytical lab, the XploRA PLUS is our best multi-sample, multi-user Raman microscope ever.It is fully confocal, not compromising image quality, spatial or depth resolution. The SWIFT Fast Raman images are the fastest fully confocal Raman images available, typically 10x faster than conventional Raman imaging.
-
Product
FTIR Spectrometers
-
FTIR spectroscopy is used to quickly and definitively identify compounds such as compounded plastics, blends, fillers, paints, rubbers, coatings, resins, and adhesives. It can be applied across all phases of the product lifecycle including design, manufacture, and failure analysis.
-
Product
Spectrometer ULS2048CL-EVO
-
Using CMOS instead of the conventional CCD technology, this spectrometer is entirely up to date and ready for the next decade.
-
Product
Glow Discharge Atomic Emission Spectrometer
GDS900
-
LECO's Glow Discharge Spectrometer (GDS) offers you state-of-the-art technology designed specifically for routine elemental determination in most conductive ferrous and nonferrous materials. The GDS900 features improved performance, stability, accuracy, and precision in steel, iron (including as-cast), aluminum, copper, zinc, nickel, cobalt, tungsten, and titanium materials, while featuring our user-friendly Cornerstone® brand software to help streamline your analysis.
-
Product
UV-VIS Spectrometers
SmartEngine
-
spectrometer is built with the linear CCD type sensor and high performance 32bits RISC controller in. The optical engine is very simple and optimized for the spectrometer. The optical bench is very rigid and stable for measurement system, especially SE series has outstanding stability of thermo-hydro variation, vibration and shock on resolution and wavelength shift performance. The compact size is very flexible for system integration.
-
Product
Mineral Spectrometer
TerraSpec 4 Hi-Res
-
Analytical Spectral Devices, Inc.
Recognized as the de facto technology for mineralogical analysis, the rugged portable TerraSpec mineral spectrometers are trusted by top geologists for performing fast, precise geologic exploration. Now the upgraded TerraSpec 4 Hi-Res mineral analyzer brings new levels of efficacy to mineral exploration technology. This state-of-the-art mineral spectrometer offers enhanced performance in the SWIR 1 and 2 regions and a 6 nm resolution to help you determine the viability of mineral exploration targets faster and more precisely than ever before. These enhancements provide you with the ability to capture accurate spectral data more quickly, especially for samples with darker mineral features.
-
Product
FT-NIR Spectrometers
-
FT-NIR spectroscopy for quality control applications in all industries, including the pharmaceutical, food, agricultural and chemical sector. FT-NIR is ideal for rapid raw material identification and is also a powerful analysis tool capable of accurate multi-component quantitative analysis.
-
Product
Spectrometer Systems
FLAME-CHEM
-
FLAME-CHEM spectrometers are fully integrated UV-Vis and Vis-NIR systems for measuring absorbance and transmission of liquid samples in cuvettes. FLAME-CHEM is a great option for teaching labs and research facilities where users seek the performance and flexibility advantages of the Flame spectrometer in a compact, small footprint instrument. Each FLAME-CHEM system comprises a preconfigured Flame spectrometer, a direct-attach light source and a cuvette holder for 1 cm pathlength cuvettes – all in a single package. UV-Vis (200-850 nm) and Vis-NIR (350-1000 nm) models are available. Add OceanView spectroscopy software (purchased separately) to complete your system.
-
Product
confocal Raman spectrometer
-
confocal Raman System provided by RTS-Mini is a non-destructive technique with minimum sample preparation required. The sample are extensive materials such as polymer, ceramic and nanomaterials as 2D materials: graphene or monolayer of MoS2 etc. Some biological samples like blood, tissue and cell are suitable for Raman measurement by certain laser excitation wavelength; Raman is an ideal technique for research and industry offering high quality data, reliability, versatility over other analytical techniques. Benefits not only include the range of samples that are suitable for analysis, but also the information content that is provided
-
Product
Tunable Narrowband Terahertz Laser Source
TeraTune®
-
The TeraTune® provides a tunable narrowband terahertz source with a tuning range from 1.5 to 20 THz and a bandwidth of less than 100 GHz.
