Showing results: 1 - 15 of 15 items found.
-
eLockIn 205 -
Anfatec Instruments AG
Input sampling rate of more than 500 MHz(fully digital design,10 MHz bandwidth)real quad-channel amplification in the full frequency range 4 channel output data with 1 us group delay dual harmonic mode in the full frequency range on-screen 4-channel spectra acquisition web-interface for external communication
-
eLockIn 204 -
Anfatec Instruments AG
The extraordionary filtering quality of this lock-in amplifier resulting in more than 130 dB Dynamic Reserve is achieved by a well chosen oversampling rate of 40 MHz and a fully digital design with 96 bit wide digital filters.
-
“Guery” -
Anfatec Instruments AG
“Guery” is a Level AFM under high vacuum. It includes a turbo molecular pump and an oil free pre-vacuum pump, that evacuate the vacuum bell jar within less than 10 minutes to a pressure of 3E-5 hPa (mbar).
-
-
Spec 64 -
Anfatec Instruments AG
The fiber coupled high speed Raman spectrometer is optimized for maximum light throughput and high speed spectrum acquisition. Connected to an AFM or a scanning stage, high speed Raman imaging is possible due to an integration time down to 10 ms per spectrum. The spectrometer can be operated with a separate software as stand-alone device or synchronized via the Anfatec AFM software.
-
Anfatec Instruments AG
*Golden (chemically resistive) vibration isolated STM body with implemented preamplifier*Computer with PCI board based SPM controller *Anfatec Scan & Anfatec Present*19“ STM controller (extra low noise 24 bit converters)*HV display for z-direction*High voltage amplifiers for the x-y-tube scanning*Optional: PC controlled bi-potentiostat and electrochemical cell
-
"Eddy" -
Anfatec Instruments AG
„Eddy“ is an Atomic Force Microscopy system for student's education. It bases on the approved Level AFM setup and includes a full sample set and a large cantilever set.
-
Anfatec Instruments AG
Vista-IR combines AFM with IR (AFM-IR) spectroscopy to provide IR spectral imaging with unprecedented sub-10 nm spatial resolution. Its patented photo-induced force microscopy (PiFM) measures the near-field optical response of the sample via mechanical force detection, making the technique robust and easy-to-use. Reliable and repeatable PiFM spectrum from 10-nm region provides “nano-FTIR” spectrum in less than a second.
-
"V45A" -
Anfatec Instruments AG
This low-noise 3-channel high voltage amplifier V45A wasdesigned for the control of tube scanners in scanning probemicroscopes. Three inputs with 10 V are amplified into twoasymmetric output voltages (Xout = 45 V and - Xout= - 45V) in the channels X and Y, while the Z-channel is 90 V relativelyto ground.
-
HV200/5 -
Anfatec Instruments AG
The HV200/5 is a high-precision HV-amplifier designed for the control of tube scanners. It takes three input voltages In X, In Y and In Z (-10 V to + 10 V), amplifies them separately (input gain switches: x1, x2, x5, x10, x20) and adds an offset voltage between -10 V and +10 V. In a 2nd stage, the signal is amplified by a factor of 20. This enables its use as HV amplifier in scanning image acquisition applications, such as STM or AFM, with the capability to shift the scan range in high resolution imaging.
-
"V45B" -
Anfatec Instruments AG
This low-noise 3-channel high voltage amplifier V45B was especially designed for the control of piezo-stack based tripod scanners in scanning probe microscopes. Three inputs with 10 V are amplified into three differential output voltages (e.g., Xout = 45 V and - Xout =- 45V).
-
VistaScope -
Anfatec Instruments AG
VistaScope is a unique AFM with flexible & full optical access to the tip/sample region. The VistaScope controller comes equipped with multiple lock-in amplifiers that allow patented photo-induced force microscopy (PiFM) and patented demodulation technique for background suppressed scattering scanning near-field optical microscopy (s-SNOM). It provides the ultimate capability in tip-enhanced optical microscopy as well as co-located AFM and far field optical techniques such as confocal Raman and confocal photoluminescence.
-
Anfatec Instruments AG
This single point Kelvin Probe System operates under ambient conditions and is small enough to be placed in a customized glowth box. The probe head operates with an oscillating membrane and can be easily exchanged. The preamplifier is integrated inside the probe head.
-
Humi -
Anfatec Instruments AG
Temperature sensor:operating range: -40 .. 123.8 °C resolution: 0.01 °CHumidity sensor: operating range: 0 .. 100 %RH (Relative Humidity) resolution: 0.05 %RHPressure sensor: operating range: 300 .. 1100 hpa resolution: 3 hpa user-friendly software
-
eLockIn203 -
Anfatec Instruments AG
The eLockIn203 can be used as spectrum analyser, as oscilloscope, as sinus generator or as measurement control system. It provides 8 A/D channels as external inputs and controls 8 D/A channels with 156 kHz update rate as external signal outputs. It can store 32 MByte data, provides modern network connection and USB connection. Moreover, it acts as web server and all data are available over the internet.