Product

Drop Test Machine

-

Shanghai Linpin Instrument

Shanghai Linpin Instrument

Single-wing Drop Test Machine Simulate the drop conditions of packaged products when different faces, edges and corners fall to the ground from different heights, thus to understand the damage of the product and evaluate the drop height and impact resistance that the packaging materials can endure while falling down, so as to improve and optimize package design according to actual conditions of the product and national standard range.

Product

High Impedance Active Probes

7A

-

Picoprobe

7A - Picoprobe

An unterminated version, can be used for capacitance and resistance measurements or in low to medium speed signal applications where a 50 ohm termination is not required. A flexible coaxial cable length of 6 feet in length is standard on the Model 7A; however, when used for capacitance measurements, GGB Industries, Inc., recommends using a shorter 3 foot cable. If a shorter length of cable is desired for capacitance measurements, please specify it when ordering (Model 7A-3ft.). Please note that Model 7A uses Model 7 replacement tips.

Product

Pocket Digital & Long Stem Thermometers

-

ThermoWorks

ThermoWorks

Known for their rugged design and Super-Fast® response time, ThermoWorks pocket digital thermometers are in widespread use in restaurants, food plants, labs, and by health inspectors throughout the world. Choose from a variety of designs, probe lengths, and temperature ranges as well as water resistance, NSF certification, and trim calibration functions. All models feature big, easy-to-read digits and fit easily into lab coat, apron, or shirt pockets. Perfect for chefs, line cooks, concrete curing, and food production lines.

Product

500 MHz Passive Probe, 2.5mm, 10:1, 10 MOhm

PP022-1

-

Teledyne LeCroy

PP022-1 - Teledyne LeCroy

Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MΩ. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400V, some as high as 600V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.Each passive probe is recommended for a certain oscilloscope, using the right passive probe with the right oscilloscope means that the probe will be properly compensated across the entire bandwidth. Using probes with a different oscilloscope will only let you compensate for low frequencies.

Product

Electrical Heat Shrink Tubing Solutions

-

TE Connectivity Ltd.

TE Connectivity Ltd.

TE Connectivity produces Raychem Electrical heat shrink tubing that sets extremely high standards in areas such as insulation, protection, and element proofing. Raychem shrink tubing uses a duplication process that involves a cross-linked material design ensuring cable system's performance. This cross-linked design creates an impenetrable barrier from the elements while simultaneously binding cables and insulating them. The heat shrink process involves tubing that utilizes a thermal influence that causes it to tightly shrink and adhere to a cable. This tight seal is not only ultra-protective, but also flexible, abrasion resistant, and easy to use. This flexible tubing can fit a huge range of cable sizes and specifications. Perfect for various different operations and industrial applications. This includes cables, wires, and even joints.

Product

Enhanced 16 Differential I/O Multi-Mode Transceiver Channels

DF2

-

North Atlantic Industries

DF2 - North Atlantic Industries

Function module DF2 (Enhanced Version) multi-mode transceivers with 16 programmable I/O channels. Differential transceivers increase resistance to noise by creating two complementary signals. These complementary signals produced on balanced lines double noise immunity by creating lower power requirements due to lower supply voltages.

Product

Digital Circuit Breaker Analyzer

CT-8000 S3

-

Manta Test Systems

CT-8000 S3 - Manta Test Systems

The CT-8000 S3 is Vanguard’s fourth generation EHV circuit breaker analyzer. The CT-8000 S3 is available with 3 (part number 9103-UC) or 6 contact timing channels (part number 9104-UC). The CT-8000 S3 can fully analyze a circuit breaker’s performance by measuring the main contact and resistor contact time, stroke, velocity, over-travel, bounce back and contact wipes. Also, an outstanding feature of the CT-8000 S3 is the ability to perform dynamic resistance tests on circuit breaker contacts.

Product

Carbon / Sulfur Analyzer

ELEMENTRAC CS‑d

-

ELTRA GmbH

ELEMENTRAC CS‑d - ELTRA GmbH

ELTRA's ELEMENTRAC CS-d is the only analyzer in the market for determination of carbon and sulfur in organic as well as inorganic samples. For this purpose, the ELEMENTRAC CS-d is equipped with both an induction and a resistance furnace (ELTRA Dual Furnace Technology), covering the full range of carbon and sulfur analysis.

Product

Glow Plug Tester

-

AUTO DIAGNOSTECH LTD

AUTO DIAGNOSTECH LTD

The analyser test the condition of the glow plug in diesel engines and it comes with a graphical display without any language it shows the actual resistance of the glow plugs with conclusive result after the test. The analyser will switch off automatically if the tool is not being used, to conserve battery life. The tester comes with a built-in torch light to light-up dim surroundings for finding the glow plug or other car electrical problem.

Product

Enclosures & Cases

-

ELMA Electronic, Inc.

ELMA Electronic, Inc.

All design enclosures and system cases are highly modular and flexible platforms. Kits are available for desktop, tower, 19’’ standard, portable and wall-mount applications. Some of our aluminum or plastic enclosures are available with EMC protection and meet RFI and other environmental requirements such as shock and vibration and water resistance.

Product

Selenium Valved Cracker

-

Veeco Instruments Inc

Veeco Instruments Inc

This source has multiple heating zones that can either generate cracked or uncracked selenium flux while resisting the chemical attack from the corrosive vapor. The unrivaled convenience and flux control are maintained without depleting the source material via an all-metal needle valve. Excellent results have been reported producing blue/green LED and laser diode devices.

Product

Carton Force Analyser

CFA

-

Rhopoint Instruments

CFA - Rhopoint Instruments

By measuring the stiffness of the substrate and crease bending resistance the user can optimise cartons for faster running and packaging speeds. The instrument allows individual creases to be analysed identifying problem areas in packaging design or manufacture. Industry research indicates that the packaging speeds of pre-glued skillets is governed by the energy required to open creases. The Hanatek CFA is the first instrument to isolate and accurately measure this key parameter The instrument measures: Bending resistance, bending moment, board stiffness, crease recovery stiffness, crease folding force, crease opening force.

Product

Linear Gauge Sensors

GS Series

-

Ono Sokki

GS Series - Ono Sokki

All the GS series Digital Linear Gauges are upgraded. The GS-1700/1800 series is a compact and cost effective basic type. The GS-6700/6800 series is a vibration resistant type which provides better performance of vibration resistance 1.5 times in strength compared to the basic type. The GS-4700/4800 pursuits heavy-duty performance required in production site. Long stroke type the GS-5050/5100 series has wide measurement range (stroke) at 50 mm or 100 mm. Using ball bearing mechanisms in these all models greatly increases bearing life.

Product

EBIRST Slave Mode Connection Cable

93-970-301

-

Pickering Interfaces Inc.

93-970-301 - Pickering Interfaces Inc.

eBIRST is a range of USB controlled test tools capable of performing automated path resistance tests on Pickering Interfaces PXI, LXI or PCI controlled switching solutions. Each tool simply interfaces with the switching system's connector so a test can be run using the supplied Windows-based software.

Product

Scott Type Crease-Flex Abrasion Tester

TF119

-

TESTEX Testing Equipment Systems Ltd.

TF119 - TESTEX Testing Equipment Systems Ltd.

Scott Type Crease-Flex Abrasion Tester, to determine the crease-flex abrasion resistance of leather, rubber cloth etc. Scott Type Crease-Flex Abrasion Tester complies with JIS-K6404-6, L1096, JASO, etc.

Product

Dual Fuel Gauge

1U432-series

-

Sigma Tek, Inc.

1U432-series - Sigma Tek, Inc.

The 1U432 dual fuel gauge is packaged as a compact, 3” instrument. It has dual D’Arsonval movements that are driven by two resistive bulb transducers in the fuel tanks. The two opposing pointers stand out sharply from the non-reflective black background.

Product

Micro-Ohmmeter

LOM-510A

-

IET Labs

LOM-510A - IET Labs

The Micro-Ohmmeter has 4 digits, 0.02% basic accuracy and 1 resolution. The 4-terminal kelvin measurement connection minimizes lead resistance errors and 80 dB of ac noise rejection provides rock-steady readings even in noisy locations. The micro-ohmmeter comes with rugged 4-terminal test clips and a large selection of optional probes, clips and fixtures allowing attachment to any low-resistance unknown.

Product

Three-Phase Transformer Winding Resistance Meters

TWA Advanced Series

-

IBEKO Power AB

TWA Advanced Series - IBEKO Power AB

TWA Advanced series is the latest DV Power solution for three-phase transformer winding resistance measurement and tap changer analysis. They are capable of testing six transformer windings with a single cable connection, as well as three-phase automatic transformer demagnetization. It has the option of the automated test mode, where the instrument operates the tap changer without operator input (minimizing the risk of human error) and records winding resistance results based on pre-selected stabilization criteria.The unique DVtest method of tap changer analysis enables checking the moving contacts of on-load tap changers during the transition, measuring the transition time, detecting open circuits, and many other types of faults. It is performed with 0.1 ms sampling rate, together with the measurement of tap changer motor current which detects motor and mechanical issues. A special proprietary algorithm is used for testing tap changers connected through a built-in series (booster) transformer. The DVtest can be performed either on one phase or simultaneously on three phases. It can also be performed together with the winding resistance test in all tap positions.A unique advantage of TWA Advanced instruments is the capability of simultaneously testing the winding resistance of all three phases of a three-phase transformer connected in a YN configuration. This can significantly speed up the testing– for example, it enables the operator to perform 33 measurements instead of 99 on a tap changer with 33 tap positions.TWA500 is equipped with a large 10.1” graphical touch-screen display, while TWA400 has a 7” graphical touch-screen display. Besides making the interface much more user-friendly compared to older winding ohmmeters, it also enables certain test options that were previously available only with DV-Win software. The most important among them are DVtest, tap changer motor current measurement, “Heat Run” test, test templates, and automatic test mode.