hide

Filter Results By:

Products

Applications

Manufacturers

Systems

are interconnected groups of purpose.

See Also: Equipment, Test Systems, System Integrators, System Test

Show Filters

Showing results: 8641 - 8655 of 17094 items found.

  • COM Express Type 6 Compact Module With Intel® Atom® X5 And X7 Processor

    CEM312 - Axiomtek Co., Ltd.

    The CEM312 supports Intel® Atom® x5 and x7 processors in a board size of 95 x 95 mm. It has two 204-pin DDR3L-1600 SO-DIMMs with up to 8GB of system memory and an optional eMMC for a maximum of 64GB memory. The COM Express Type 6 module is integrated with Intel® Gen 9 graphics and supported with DX12.0, OCL 2.0 and OGL 4.3 for immersive graphics and media performance with a resolution up to 4K. Moreover, the industrial grade system on module can operate under wide temperature ranging from -40 to 85°C (-40°F to 185°F). The Intel® Atom®-based computer module also offers diverse comprehensive I/O interfaces to meet requirements for a variety of industrial applications. The CEM312 can serve as an excellent solution for graphics-intensive, industrial IoT applications such as industrial control, medical imaging, digital signage, gaming, military, and networking.

    Product Home Contact/Sales Distributors/Reps Datasheet Manual Company Catalog Add To List

  • Fire Suppression/Detection

    Dexter Research Center, Inc.

    Dexter's sensitive yet rugged fire detectors, or fire sensors, serve as the foundation of US combat fire suppression systems on combat aircraft and ground vehicles ranging from the HUMVEE to the Abraham's Tank.  Our fire sensors consume low energy, making them the premier safety component on battery-powered as well as hot-wired systems.  We like to call them "the eye that never sleeps."  How fast are they?  Fast enough to race the fire caused by a rocket hitting a fuel tank and win, triggering fire suppression on the spot to help protect soldier and pilot alike. Rugged missions require rugged equipment.  Intensive MIL-STD-883H testing performed by Trialon Corporation, an independent testing facility, confirm that Dexter Research's silicon-based temperature sensor detectors meet the same rugged requirements of 1,000G's for mechanical shock and 30G's in random vibration for which our thin-film detectors are famous.  Download Dexter's report here (PDF).

    Product Home Contact/Sales Company Catalog Add To List

  • Particulate Monitor

    LaserHawk - Teledyne Monitor Labs

    The LaserHawk® was designed to comply with 40CFR60, Appendix B, Performance Specification 11 for continuous particulate matter monitors. A complete system includes an optical head, purge system, enhanced remote panel fulfilling all QA/QC requirements. The optical head is built of heavy gauge aluminum parts and finished with acid-resistant enamel paint. All exposed hardware is stainless steel. The rugged design and extremely low heat generation allows operation over a wide range of ambient temperatures. It is built to withstand the typical hostile environment associated with outdoor industrial applications, including substantial shock and vibration.TML has paralleled the design of the LaserHawk® from its Model 560 LightHawk® compliance opacity analyzer and the UltraFlow-150 Ultrasonic Flow Monitor. All utilize the same Enhanced Remote Panel; communication protocols, and mounting hardware. This saves the customer valuable inventory dollars and permits the use of spares on a variety of equipment.

    Product Home Company Catalog Add To List

  • Industrial Automation Solutions

    LXinstruments GmbH

    LXinstruments FCT systems for industrial electronics assemblies are particularly suited for applications with a large variant diversity for medium volume sizes. They are used for testing utility electronics as well as for drive control and grid management systems. We have also implemented systems for functional test, repair and calibration of decentralized PLC I/O assemblies.Since early failures in the field often lead to enormous costs, we not only provide functional test systems, but also burn-in systems for simultaneous testing of many assemblies in a climate chamber. Due to the modular structure of our software, it is possible to establish a logical separation between the definition of the climatic profile to be executed and the actual test sequence, during which the different electrical tests are processed. Connections to HALT/HASS systems can also be established without problems.

    Product Home Contact/Sales Company Catalog Add To List

  • Connectors

    MacArtney A/S

    Ever since our company foundation in 1978, connectivity has held a special place at the core of the increasingly system-oriented MacArtney organisation. Even today, connectors, cables, terminations, junction boxes and everything beyond and in between, are involved in pretty much everything that we do, and in many ways, it is connectivity and integration that have paved - and still pave - the way for most other innovative MacArtney products and systems.

    Product Home Contact/Sales Distributors/Reps Company Catalog Add To List

  • Continuous Gas Analyzer

    CT5100 - Emerson

    Emerson CT5000 series, providing the most comprehensive analysis available as it can detect down to sub ppm level for a range of components, while simplifying operation and significantly reducing costs. Unlike traditional continuous gas analyzers, the CT5100 can measure up to 12 critical component gases and potential pollutants simultaneously within a single system – meeting local, state, national, and international regulatory requirements.

    Product Home Contact/Sales Company Catalog Add To List

  • Dual Mode Wind Turbine Performance Lidar

    ZephIR DM - ZephIR Lidar

    ZephIR DM is a Dual Mode variation of the successful 300 system. ZephIR DM measures wind characteristics in front of or behind a turbine from just 10 metres (33 feet) out to 300 metres (984 feet) situated inside the spinner or on top of the nacelle, during the operation of wind farms onshore and offshore (this is limited to 200m (656 feet) when in ground based vertical mode).

    Product Home Contact/Sales Company Catalog Add To List

  • Engine Dynamometer

    TD-3102 - Taylor Dynamometer, Inc.

    Power: 1,250 hp (932 kW)Torque: 3,600 ft-lb (4,881 Nm)Speed: 6,000 rpmWater Use: 100 gpm @ 60 psi (6.3 lps @ 420 kpa) (No cooling system)Minimum Controllable Power: 11 hp (5 kW)Minimum Controllable Torque: 32 ft-lb (24 Nm)Inertia Value: 570 lb/in2Weight: 360 lb (163 kg)

    Product Home Contact/Sales Company Catalog Add To List

  • Engine Dynamometer

    TD-3100 - Taylor Dynamometer, Inc.

    Power: 1,250 hp (932 kW)Torque: 3,600 ft-lb (4,881 Nm)Speed: 4,000 rpmWater Use: 100 gpm @ 60 psi (6.3 lps @ 420 kpa) (No cooling system)Minimum Controllable Power: 11 hp (5 kW)Minimum Controllable Torque: 32 ft-lb (24 Nm)Inertia Value: 570 lb/in2Weight: 360 lb (163 kg)

    Product Home Contact/Sales Company Catalog Add To List

  • HES Spectrometers

    Is-Instruments

    ISI’s standard HES spectrometer offers a 100-fold increase in throughput over conventional systems currently available. This increased throughput can lead to a superior signal-to-noise ratio (SNR) for a given observation over a Czerny Turner instrument. The HES spectrometer contains no moving parts and yet offers the advantages of a Michelson Interferometer with the spectral properties of a traditional diffraction grating-based device, such as a Czerny Turner spectrometer.

    Product Home Contact/Sales Company Catalog Add To List

  • High Precision Altimeter

    PRO-2000 - Technidea Corporation

    The ZIPLEVEL® PRO-2000 consists of a Base Unit that stores its hand held Measurement Module, 100' (60m) of interconnecting Cord, User Guide and all accessories. Accessories include, a rubber protective Boot for the Measurement Module, a Unipod for measuring without bending and a pair of stakes to secure the Base Unit on a hillside. The fully extended Unipod doubles as a 4' (121.9cm) vertical calibration standard for the system.

    Product Home Contact/Sales Distributors/Reps Company Catalog Add To List

  • Interface Converter

    ZET 7076 - ZETLAB Company

    Previously it was widely thought that it is enough to receive sensor readings and to have remote control over them. But gradually there evolved a need for remote control, i.e. people need to receive sensors readings and to control their performance via Internet (for instance, on a portable device). Such possibility simplifies quite a lot of tasks since one can control performance of a system located at the other end of the city or even a country.

    Product Home Contact/Sales Company Catalog Add To List

  • Laser Photometer

    8587A - TSI Inc.

    The photometer owners asked TSI to develop a modern version of the Laser Photometer 8587 that retains data continuity with the original version. Without data continuity, vast amounts of legacy research would not be directly comparable to new research. The result was the Laser Photometer 8587A.The Model 8587A can also be used in HEPA filter scanning systems to measure the penetration efficiencies of large, high-efficiency filter assemblies

    Product Home Contact/Sales Distributors/Reps Company Catalog Add To List

  • Military Grade Refrigerant Monitor

    3300RM2 - Bacharach, Inc.

    The Parasense 3300RM2 military grade refrigerant monitor is highly sensitive and dependable. The monitor senses the smallest of refrigerant gas leaks down to 10 ppm MDL, providing enough notification to prevent serious problems developing. The 3300RM2 aspirated refrigerant monitor can sample air from up to 32 points around your refrigeration systems utilizing 8 channels with a range of output options.

    Product Home Contact/Sales Distributors/Reps Manual Company Catalog Add To List

  • Modular Infinity Microscope

    MIM - Applied Scientific Instrumentation

    ASI Modular Microscope components consist of tube lenses along with adapters and accessories that either are primarily used in the collimated light space or adapters that are to be used on the image side. Collimated light adapters use the 38mm diameter C60-RING system to connect components. Focus-side adapters attached to lens tubes with either a 30mm diameter coupling to the I.D. of the C60-TUBE, or with a 50mm coupling on the O.D. of the lens tube.

    Product Home Contact/Sales Datasheet Company Catalog Add To List
Get Help