Automotive Diagnostics
-
Product
Automotive
-
As vehicles advance towards autonomous operation, test engineers face drastically increasing system complexity while dealing with ever present cost and time pressure.
-
Product
Radio Frequency Probes (Automotive) HF77HFMm0412G2160MSMPmF
1034901
-
The Radio Frequency Probes (Automotive) HF77HFMm0412G2160MSMPmF is designed with precision and durability, catering to demanding automotive applications. Built with a coaxial probe structure, this model ensures optimal performance with a temperature range of -45°C to +100°C and is specifically tailored to deliver reliability in harsh environments. The probe's design offers impressive mechanical properties, featuring a maximum travel of 2.80 mm and a preload of 230 cN, ensuring secure connections and accurate readings when interfacing with automotive electronic systems.
-
Product
EZ-Tach Digital Automotive Tachometer
325
-
The EZ-Tach makes RPM measurements quick and easy. This is a very useful tool for tune-up and other diagnostic work where accurate RPM readings are required. Just clamp over any spark plug wire and get accurate RPM on conventional or DIS ignition systems. The unit also features a data hold function. The large 2000 count LCD display shows; RPM, function, data hold indication and low battery indication. The EZ-Tach is powered by one 9 volt battery. Battery and instructions are included.
-
Product
EV Diagnostics
-
A high voltage battery charger and discharger. Improve battery pack capacity with constant current charge, and discharge modes.
-
Product
Automotive DC Voltage Testing Pen
HW304 Series
-
Wenzhou Zhengyuan Electronic Co., Ltd.
Automotive DC voltage testing pen available in models HW304L and HW304R.
-
Product
PXIe-8623, 4-Port, 100/1000BASE-T PXI Automotive Ethernet Interface Module
787992-01
Ethernet Interface
PXIe, 4-Port, 100/1000BASE-T PXI Automotive Ethernet Interface Module - The PXIe-8623 is a 100/1000BASE-T unshielded twisted pair (UTP) PXI Automotive Ethernet Interface Module that helps you develop applications with the NI‑XNET driver. With the PXIe-8623, you can develop applications that require Ethernet to test and validate automotive electronic control units (ECUs). The PXIe-8623 provides up to four independent endpoints or up to two network terminal access points (TAPs). It features onboard hardware timestamping and can act as up to four separate 802.1AS masters or slaves, making synchronization with an external network as well as the rest of a PXI system possible. Additionally, the PXIe-8623 features LEDs on the front panel to help you monitor the network link and activity.
-
Product
Automotive Ethernet Channel Compliance Software
AE6910L
-
The Whole Communications Channel represents the complete wired connection between two transmit / receive modules with an automotive Ethernet interface using a two-wire twisted pair cable. The Keysight AE6910L software ensures signal quality requirements, with conformance testing for that channel. In addition, it performs return loss, insertion loss, mode conversion, and power sum cross talk measurements of a cable in a bundle.
-
Product
Automotive Oxygen Sensor
Model R-22A
-
Teledyne Analytical Instruments
Teledyne has a long and successful history in the development and supply of oxygen sensors for automotive emission testing equipment.The “R” series sensors are used by most automotive emission equipment manufacturers worldwide. We are striving to improve our sensors through aggressive research and development, assuring the highest quality products offered by any supplier of oxygen analyzers.
-
Product
Radio Frequency Probes (Automotive) HF819HSDm013G2020HSDmP
1142275
-
The Radio Frequency Probes (Automotive) HF819HSDm013G2020HSDmP is engineered for high-performance applications, offering precise functionality with its advanced coaxial design. This probe features an impressive operating temperature range of -45°C to +100°C, making it ideal for various automotive testing environments. The HF819 model is known for its robust electrical specifications, ensuring a continuous current capacity of 10A, integrated with a characteristic impedance of 100 ohms and operating efficiently up to 3 GHz frequency levels, thus enabling reliable performance in automotive applications.
-
Product
Automotive Products
-
Renesas has invested in key technologies to address the current mega trends within the automotive market such as environment, safety, information, and affordability. This effort has resulted in leadership positions in high-performance power conversions, state-of-the-art precision analog, cell balancing and battery charging ICs, power-efficient Class D audio amplifiers, and highly flexible TFT display controllers.
-
Product
Radio Frequency Probes (Automotive) HF77HFMf0112G540MSMPmF
1051503
-
The Radio Frequency Probes (Automotive) HF77HFMf0112G540MSMPmF are expertly designed coaxial probes, essential for effective automotive RF applications. These probes are engineered to operate efficiently across a range of temperatures from -45°C to +100°C and feature a pitch of 6.00 mm or 236 mil. With an impedance of 50 ohms and a frequency rating of 12 GHz, they provide reliable performance for a variety of automotive testing scenarios.
-
Product
Radio Frequency Probes (Automotive) HF77MATEAXf0212G1080MSMPmF
1112868
-
The Radio Frequency Probes (Automotive) HF77MATEAXf0212G1080MSMPmF is designed for high-performance applications requiring precision in coaxial probing. Its meticulous construction, with a total length of 37.80 mm and a tip style diameter of 10.00 mm, ensures it fits seamlessly into various automotive testing scenarios. The probe operates efficiently across a temperature range from -45°C to +100°C and maintains an impedance of 50 ohms, making it suitable for a diverse range of electronic testing environments. With a nominal travel of 3.00 mm and spring force specifications tailored to ensure optimal performance, this probe not only meets but exceeds the rigorous demands of today’s automotive applications.
-
Product
Radio Frequency Probes (Automotive) HF860FAKRAm016G950MCXfPV1
1033407
-
The Radio Frequency Probes (Automotive) HF860FAKRAm016G950MCXfPV1 is a precision engineered coaxial probe essential for automotive applications. This robust probe is designed to withstand a wide temperature range of -45°C to +100°C, making it suitable for various testing scenarios. Built with a pitch of 6.50 mm (256 mil), it ensures reliable signal integrity for high-frequency applications up to 6.00 GHz. The continuous current capacity of 10 A guarantees efficient operation under demanding conditions, with an additional continuous current rating of 3 A designed for alternate applications.
-
Product
Display ICs For Automotive
-
Renesas has invested in key technologies to address the latest trends within the automotive market. Offering both standard and AEC-Q100 qualified products for automotive applications, Renesas' automotive display IC product line is defined by feature rich, highly integrated semiconductor solutions that incorporate many key function blocks for front console, rear seat entertainment, and rear camera display applications.
-
Product
Retractable Cable + Automotive Voltage Tester With Magnet Adsorption
3703
-
Peaceful Thriving Enterprise Co Ltd
*Check on 6, 24 and 48V DC systems.*Used as an extension cord for testing electrical circuits in cars , trailer, boats.
-
Product
Configurable Simulation Of ECU Diagnostics.
TestCUBE2
-
Softing Automotive Electronics GmbH
The ECU simulation TestCUBE2 is the counterpart for all cases of application in which an ECU is not yet (e.g. preparation of workshop tests) or no longer (e.g. tester regression test) available. TestCUBE2 is a configurable hardware and software solution for simulating ECU diagnostics with real bus communication. With just one device, you can simulate several ECUs or even an entire vehicle at the same time.
-
Product
EZ Tach +Plus Automotive Tachometer
328
-
*Versatile instrument can measure RPM on a wide variety of engines from string trimmers to automotive. *Reads engine revolutions from 0 to 20,000 RPM *Picks up RPM signal wireless or with supplied inductive pickup *Great for setting idle speeds! *Built-in LED Flashlight which can be used while taking measurements *Backlit LCD display *Accuracy +10 RPM
-
Product
Automotive
-
Radiometrics Midwest Corporation
A2LA accredited state of the art 10 meter, environmentally controlled, vehicle level, absorber-lined chamber is available to solve your EMC problems. Testing is performed on a 20-foot diameter turn table with a 25,000 pound capacity.
-
Product
6-24V DC Heavy Duty Automotive Circuit Tester
1175
-
Circuit tester with 1.5M of heavy duty cable and earth (crocodile) clip. Insulated contact point to prevent accidental shorting. Testing range 6-24V DC
-
Product
Automotive Paint Meter
311
-
The Elcometer 311 Automotive Paint Meter allows the user to quickly identify vehicle’s damage not reported in public or commercial condition reports including:hidden reworkvehicle impact damagevehicle resprayfilled body panels
-
Product
Automotive Test Systems
-
Ono Sokki Automotive Test Systems - flow meter, non-contact speedometer, engine tachometer, crank angle detector, and more
-
Product
Clinical Diagnostic Products
-
Clinical diagnostic solutions should be productivity-focused and efficiency-driven without compromising reliability. We offer a broad range of clinical diagnostic products for blood group serology, infectious diseases, diabetes, newborn screening, autoimmune diseases, and more. By combining our tests with our automated platforms your laboratory can provide quality results and impact patient lives around the globe.
-
Product
OBD II Data Link Connector Breakout Box & Diagnostics Software
Mr. BOB DLC
-
Automotive Diagnostics and Publishing
Mr. BOB DLC OBD II Data Link Connector Breakout Box & Diagnostics Software for Network Waveform Viewing. This OBD2 breakout box with 8 Graphing Meter Scope like channels, is designed for the OBD2 DLC data link connector. Includes OBD II protocols such as PWM, ISO, KWP2000, 9151, J1850, VPW and CAN.
-
Product
PXI 20Amp 28Volt 4xSPST Automotive Relay
40-180-111
Relay
Models 40-180/181 are High Power Relay Modules available with 2 SPST, 4 SPST or 2 SPDT contacts. They are capable of switching inductive/capacitive loads up to 40A at 14VDC or 20A at 28VDC.The 40-180/181 High Power Relay Modules are suitable for switching heavy loads or for slaving large external relays, contactors and solenoids. In particular these relay modules are designed for automotive test applications requiring the switching of D.C. voltage at high current. The 28V version is suitable for truck system test applications.
-
Product
Radio Frequency Probes (Automotive) HF860FAKRAm016G950MCXfS
1035672
-
The Radio Frequency Probes (Automotive) HF860FAKRAm016G950MCXfS are meticulously designed to meet the specific needs of automotive applications, making them a crucial tool for any professional in the field. Designed with a robust coaxial probe structure, these RF probes incorporate advanced materials such as beryllium copper and brass, ensuring exceptional durability and performance in various environmental conditions. They can operate effectively within a temperature range of -45°C to +100°C, making them suitable for both extreme temperatures and demanding applications.
-
Product
Automotive Solutions
-
One of the most challenging applications in the field of automotive testing is manufacturing electronics. With each successive model year, the number of automated features increases. Every segment of the automotive electronics plays a role in the safety and reliability. These critical applications require high dependability and low maintenance and warranty costs. Our customers don’t have room for error, hardware test systems must perform as designed. Circuit Check provides Automated Test Systems that meet the stringent needs of this marketplace.
-
Product
Network Analyser And Diagnostics
Module Analyser
-
Module Analyser is a 5 in 1 easy to use CAN bus analyser with the following advantages:■ CAN and LIN monitoring via DBC/LDF/Fibex files ■ Automotive OBD ISO15765 Scan tool and UDS ISO14229■ J1939■ Integrated ODX/MDX editor■ Data acquisition and logging
-
Product
Automotive Test Platform
ETS-800
Test Platform
Next-Gen Automotive Test Platform With the Industry’s Highest Throughput and Fastest Time to Market
-
Product
Instrument Maintenance & Diagnostics Software
-
Instrument Maintenance and Diagnostic Software monitors instrument health and provides email-based alerts, notifying you when to consider replacing key consumables, when to perform preventive maintenance, and when an instrument stops running anywhere in your lab. This software is also designed to track inventories, manage schedules, aggregate data, provide resource visibility, and integrate with other lab systems.Monitoring is available for a wide range of instruments and allows you to capture lab-wide instrument utilization data across all of your workflows. These capabilities are designed to deliver reduced downtime and sustained instrument performance, driving simplification, optimization, and transformation of lab operations.
-
Product
Diagnostic Solution
SYSTEM 8 Diagnostic Solution
-
The SYSTEM 8 Diagnostic Solution is the solution to board fault-finding problems. Equally at home with analogue and digital PCBs, the systems 64 digital and 24 analogue test channels provide a variety of test and measurement techniques to track down the most elusive faults.
