Vibrating Sample Magnetometers
measure a material's hysteresis, anistropy, torque and polar kerr properties.
See Also: Magnetometers, VSM, Cryostats
-
Product
Vibration Sensor
-
Remotely monitor the health of your equipment with 3560 FC Vibration Sensors. Obtain real-time vibration measurements through the Fluke Connect® Cloud via Fluke 3502 Gateway. Measuring imbalance and misalignment these sensors provide an early warning for equipment and sends alarms through the Fluke Connect Condition Monitoring software to a desktop or smartphone. This product requires a 3502 FC Gateway and Fluke Condition Monitoring software. Package comes with 10 sensors.
-
Product
human body vibration module
-
Human and Whole Body Vibration TestingThe human and whole-body vibration module tests and measures the effect of vibration on the human body. The extracted parameters allow the simple assessment of the injuries risk for workers, exposed to constant vibration. Our solution supports the whole-body and hand-arm vibration measurement are supported according to all relevant international standards - ISO 5349, ISO 8041, ISO 2631-1 and ISO 2631-5.
-
Product
Sampling Boards
MSXB 028
-
Simultaneous Sampling Boards are used in multichannel spectral analysis and other applications that require simultaneous acquisition of several channels. The MSXB 028 usually is used for applications that require interchannel phase measurements such as applications that perform transfer function computations. This board eliminates phase error introduced by sequential sampling.
-
Product
Vibration Monitoring
-
Acu-Vib Electronics Acoustic & Vibration
Building & Ground Vibration Monitoring Station.
-
Product
Vibration Meters
-
Simple to operate and are ideal for obtaining spot measurements. Features accurate, piezo-electric accelerometer sensor, LCD read-out in acceleration, velocity and displacement and true RMS velocity response.
-
-
Product
Vibration Meters
-
The level of vibration is a useful guide to the balance, alignment and general condition of pumps, motors, and other machinery. Poor balance, misalignment, and looseness results in higher levels of vibration and indicates maintenance is required for operational as well as safety reasons.
-
Product
Industrial Vibration Sensor
IVS-500
-
The new IVS-500 Industrial Vibration Sensor is the key to fast acoustic quality inspection, structure-borne noise analysis and reliable pass-fail decisions. This Laser sensor measures reliably, in demanding industrial environments, without contact and therefore without wear and on virtually all surfaces. Costs and yields are therefore optimized by reducing false rejects in the production and assembly process. The simple setup and ruggedized sensor design of the IVS-500 enable a smooth integration into production test systems. Complemented with the software tool QuickCheck, Polytec offers a comprehensive solution for reliable pass/fail analysis.
-
Product
Human Vibration Management Software
HVManager
-
HVManager is a Risk Assessment and Recordkeeping software tool for reporting Vibration measurements and predicting Personal Exposure Levels. It provides reports of vibration measurement data from hand-arm and whole-body measurements acquired from the Larson Davis HVM100 Human Vibration Meter and produces vibration database records by tool type and serial number. HVManager also compiles cumulative predicted vibration exposure levels from any combination of tools and task durations taken from the measurement database.
-
-
Product
Vibration Chambers
ETV-SERIES
-
Environmental Chamber with Vibration Shaker Interface provision consists of Environmental Test Chamber, Vibration Shaker Interface Provision, HMI/PC PLC based Control System etc., This chamber is designed with unique features to meet the control parameters like Temperature, Humidity (optional) and 3 Axis Vibration Controls which are specified in the specification.
-
Product
GT90 Dioxin+ Automatic Dioxin Sampling System
-
The GT90 Dioxin+ is designed specifically for an automatic and long-term sampling of dioxin emissions. The MCERTS certified system represents the cutting-edge technology for dioxin sampling and fulfills all requirements of the dioxin measurement standard. The system can be used in a variety of industrial processes such as waste incineration and cement production. Gasmet offers a full dioxin sampling solution package which consists of a system, lifetime service and support, documentation and training, and our expertise of over 30 years.
-
Product
Vibration Measuring System
SmartVibro
-
There are many functions to express characteristics of vibration. However it is necessary for the conventional vibrometers that the same point is measured plural times switching objective functions one by one. SmartVibro which has a simultaneous measurement function can measure Acceleration, Velocity and Displacement simultaneously by just pressing the measurement start key one time. It can reduce the operating time and prevent miss-measurements. By switching the screen, VM-4424S・VM4424H can confirm Acceleration Envelope for bearing condition which enables small scars to be found easily.
-
Product
Noise & Vibration Analysis
DATS Software
-
DATS is a comprehensive package of data acquisition, signal processing and reporting tools. It is used mainly for noise and vibration analysis, but can be used for a wide range of engineering and general signal processing tasks.
-
Product
Vibration Measuring System
-
here are several parameters to express about vibration.For conventional vibrometers, repetitive measurements at each point switching parameters is necessary.However,for CardVibro Air2 equipped with a simultaneous measurement function, measurements of Displacement, Velocity, Acceleration and furthermore Envelope for bearing condition diagnosis is possible by just pressing a start key at the same time.
-
Product
Vibration Testers
-
Lansmont’s Vibration Test Systems are simple to operate safely and can perform a wide range of vibration tests in accordance with government, industry and corporate specifications.
-
Product
Portable Vibration Meters
-
Columbia Research Laboratories
Columbia's Handheld Vibration Meter is a general purpose vibration measuring instrument for the periodic, routine checks of industrial machinery and general field use where portability and ease of use are required.
-
Product
Automatic Sampling Robotic Diffusion Station
Phoenix RDS
-
The Phoenix RDS (Robotic Diffusion Station) platform provides fully automated sampling and collection for either six or twelve vertical diffusion cells in a compact footprint, using the same heating and stirring blocks as are found in the DB-6. A third block holds a wash station and up to five additional media sources. Samples are collected into 12×32 vials with pre-slit septa. Controlled by Teledyne LABS Diffusion Master™ software, up to two RDS systems (24 vertical diffusion cells at once) can be operated independently from a single computer workstation.
-
Product
Winkler ATEX Heated Sample Lines
-
Hazardous area ATEX heated sample lines from Winkler (Germany) for use in zones 1 & 2 (gas) and zones 21/22 (dust). These are specialist heated lines for gas sample handling and process applications, manufactured from high quality, tested and approved materials.
-
Product
Vibration Analysis Software
VibroDesigner
-
VibroDesigner software is used for data acquisition, storing and analyzing. Using this software with portable STD-500/510/3300 or stationary CTD3168/2160/2060 units helps to schedule machinery maintenance at a convenient time.
-
Product
Wireless Vibration Sensors
-
A Wireless Vibration Sensor is a device that includes an Accelerometer and is capable of measuring vibration and send it to a receiver using a Wireless protocol. Depending on the wireless protocol used, some of these sensors may even transmit data in real time. Hence having the capability to connect via peer to peer or mesh network.
-
Product
Vibration
-
In their basic versions, they are well suited for measurement of whole body and hand-arm vibration measurements.
-
Product
General Purpose Vibration Sensors
AC104
-
Multi-Purpose Accelerometer, Side Exit Connector / Cable, 100 mV/g.
-
Product
Vibration Shaker and Control Amplifier
-
The performance of this Vibration System supports a wide variety of Vibration and Impact Shock capabilities, at g levels and weight-handling levels not previously available at Pacific. Applications include product development, design conformance, qualification, certification, and production screening to Military, Aerospace, Automotive, and Medical specifications.
-
Product
Vibration Testing
-
Response Dynamics Vibration Engineering, Inc.
We most often characterize a problem first and work from known conditions, and stay in “the known” as we proceed by making sense of what we observe as we move forward. We test and analyze the change in dynamics we are trying to create in real-time, on site, and often make changes to our experimental test plan on the fly as we discover how a system is actually behaving. In doing so we often get meaningful results from which we can make sound engineering decisions in a short time frame. We don't just make measurements and spit out data. We help identify the problem and propose solutions.
-
Product
Noise and Vibration Tester
-
SKF Condition Monitoring Center
High tech analysis and measurement such as frequency analysis (FFT) and further advanced analysis pinpoints faults. Spectral masks help to optimize the bearing performance in the particular customer application.
-
-
Product
Mechanical Vibration
VibraTest Series
-
Purpose - lost cost mechanical shaker for testing products and components to in-service vibration conditions between 8 to 60Hz. Maximum acceleration to 3.2G is standard, up to 10G optionally.
-
Product
Environmental Vibration
-
The monitoring of environmental and ground vibration is required because vibration can cause both damage to local structures and distress to nearby residents. There are many sources of environmental vibration where monitoring is required, common sources are Civil Engineering Works, Quarrying and Blasting, Construction Sites and road works.
-
Product
USB-4432, 102.4 kS/s, 100 dB, 0.8 Hz AC/DC Coupled, 5-Input Sound and Vibration Device
780421-01
Sound and Vibration
The USB-4432 is designed for sound and vibration measurements. Four of the input channels incorporate integrated electronic piezoelectric (IEPE) signal conditioning for accelerometers and microphones and built-in antialiasing filters that automatically adjust to your sampling rate. The fifth input channel does not include IEPE support.
