Showing results: 181 - 195 of 383 items found.
-
SDT Ultrasound Solutions
Extend your inspection capabilities with ultrasound sensors and Improve Leak Detection And Tightness Testing
-
SEMIFLOW CO.65 -
SONOTEC GmbH
SEMIFLOW CO.65 non-contact clamp-on flow sensors are ideal to measure abrasive, adherent, corrosive, and ultra-pure liquids on rigid plastic tubes and pipes used in the semiconductor industry. Equipped with an integrated electronic unit, they function as a complete flow meter in the size of a small transducer without an external board or transmitter.
-
SONATEST VEO3 -
Innerspec Technologies, Inc
Veo3 by Sonatest is the third generation of the Phased Array instruments line. The most improvement of this instrument is that uses 3 complementary inspection techniques simultaneously, which helps to inspect with confidence, providing fast and accurate results.
-
CMX Series -
Qualitest International Inc.
Ultrasonic Material and Coating Thickness Gauge - CMX Series is a full function ultrasonic thickness and coating gauge with a widest variety of modes and features for extra versatility.
-
MFD350B -
Rinch Industrial Co.,Limited
Your product description goes here.MFD350B Portable Digital Ultrasonic Flaw Detector is a economical and practical model improved on MFD500B. Except for the differences of its measuring range, working frequency and transmitted pulse parameter, the other performances are the same as MFD500B.Based on ultrasonic pulse reflection testing principle, MFD350B controls all testing process by the mini-processor. And it has low power design and can do charge with two models such as online chargeing and offline charging. And it can work continuously about 8 hours.With large capacity, digital multi-color TFT LCD, original imported stable IC, small size, light weight, stable performance and favorable price, MFD350B is one of our company’s high promoted super cost performance and economically ultrasonic flaw detector.
-
ECHOMAC® FULL BODY TESTER -
Magnetic Analysis Corp
At the heart of the Echomac® Full Body Tester for Ultrasonic (UT) Testing of Spinning Tube and Bar is the unique Adaptive Pitch Control (APC) transducer carrier and the precision design “Spin-The-Tube/Bar” conveyor.
-
910-28015B -
Parallax Inc.
The PING))) Ultrasonic Distance Sensor is perfect for any number of applications that require you to perform measurements between moving or stationary objects. The sensor measures distance using sonar; an ultrasonic (well above human hearing) pulse is transmitted from the unit and distance-to-target is determined by measuring the time required for the echo return. Output from the PING))) sensor is a variable-width pulse that corresponds to the distance to the target.The protector stand was designed to help fortify the PING))) sensor against collision damage, and to provide a more stylish appearance in doing so. The stand is cut from high-grade aluminum and can be attached to your projects easily.
-
LaserLinc
The LaserLinc UltraGauge+™ series of ultrasonic meters and gauges measure wall thickness, layer thickness, and concentricity of plastic, rubber, glass, and metal products. Typical applications include tubing, hose, pipe, insulated wire, cable, and certain multi-layer products.
-
SONOTRACK® -
Metris B.V.
Sonotrack is the only recording system which is designed for laboratory use and high-throughput analysis of USV. It records the full spectrum of ultrasonic vocalizations from 15 kHz to 125 kHz without limitations for the "recording duration". The ultralow-noise amplifiers and highly sensitive microphones provide unrivalled quality of the recorded signals.
-
TUD-1 -
Sonel S.A.
Sonel TUD-1 is a compact, portable device that receives ultrasonic waves transmitted by air, and then converts them into acoustic waves in the range audible through the human ear. The device additionally amplifies the received signals. Next after conversion, TUD-1 displays them on the diode bargraph and emits in an acoustic form through the headset.
-
Mini-MAX-Series -
Qualitest International Inc.
The MINI-MAX, Ultrasonic Bolt Tension Monitor, defines the state of the art in the measurement of the actual elongation produced by tightening a threaded fastener. The MINI-MAX can measure the elongation very accurately in fasteners of virtually any material from 1/2 inch to 4 feet in length. The measurement is achieved by determining the change in the transit time, of an ultrasonic shock wave along the length of the fastener as the fastener is tightened by any method. The on-board microcomputer automatically interprets this time measurement to display the time(nanoseconds), elongation, load, stress, or %strain from stretching a fastener. Through the use of high speed digital signal processing and automated diagnostics, the MINI-MAX minimizes the requirement for extensive operator training. With built in data recordation and reporting through an RS232 interface, the MNI-MAX offers an easy to use and reliable solution to the most difficult bolting problem.
-
Serie P53 -
PIL Sensoren GmbH
With the P53 STEEL HEAD series, PIL has expanded its product portfolio to include the first ultrasonic sensor in a completely encapsulated stainless steel housing. Due to the special housing construction made of stainless steel (1.4404), the STEEL HEAD is very well suited for use in harsh environments such as dust, humidity and steam.
-
Cygnus 1 Ex -
SONOTEC GmbH
The Cygnus 1 Intrinsically Safe is a rugged, shock-proof multiple echo ultrasonic surface thickness gauge designed for safely measuring metal thickness to determine wastage or corrosion in potentially explosive environments. By using multiple echo technology the metal thickness gauge measurements are error checked using 3 return echoes to provide repeatable, reliable results.
-
SONATEST PRISMA -
Innerspec Technologies, Inc
Sonatest’s Prisma PA model provides the user with an ultrasonic Phased Array flaw detector. The tool contains PA capability from 16:16 manual to 16:64, with 2D encoding. It features an updated imaging system that allows the A scan, B scans and C scans to be used. The 3D ScanPlan includes the part, weld, wedge, probe and scan coverage.
-
DUC -
Kobold Instruments, Inc.
Two ultrasonic clamp-on transducers are externally mounted on a pipe and produce an acoustic path. The transducers send and receive acoustic signals and their transit times are measured by an electronic flow transmitter. The signal is accelerated by the flow in the forward direction. The return signal is decelerated by the flow in the opposite direction. The difference in time between the two, together with the path length L, can be used to determine the average flow velocity. This principle is known as the acoustic time-of-flight principle.
