Filter Results By:

Products

Applications

Manufacturers

CPU

Central Processing Unit. Computer components responible for executing processes. CPUs execute calculations, manipulate data, generate control signals, and store results.

See Also: Microprocessor


Showing results: 286 - 300 of 441 items found.

  • RX Family Of 32-bit High Power Efficiency MCUs

    RX200 - Renesas Electronics Corp.

    The RX200 Series offers the best mix of low power consumption and improved performance in the RX Family. It delivers max. of 80MHz CPU operation with 32KB to 1MB of embedded flash memory. RX200 Series offers a wide set of peripherals, including USB, CAN, ADC, advanced security, and IEC60730 appliance safety standard support. The RX200 Series is suitable for industrial equipment, home appliances, office equipment, healthcare products, meters, and so on. Some of the RX200 Series products are tuned for motor control solutions, too.

  • 6U VPX Board

    VP62009 - LinkedHope Intelligent Technologies Co.,Ltd.

    VP62009 is a 6U VPX board based on Intel® Xeon® D-15xx processors, with more than 7-year life cycle. Supporting up to Intel® Xeon® D-1577 (16x 1.3GHz) processor, VP62009 is able to perform vector operation and floating point arithmetic that require high throughput. Besides, VP62009 supports Intel® Turbo Boost, with the processing speed of CPU up to 2.7GHz. The high-performance CPU and the Turbo Boost technology leave no worries for extra cost and complexity of system settings.VP62009 provides 2x 10 Gigabit Ethernet for VPX Data Plane communication, 2 x8 PCIe for VPX Expansion Plane communication, 4 GbE for VPX Control Plane communication. Rich data exchange interfaces on VP62009 make it easy to build box-level or system-level solutions.

  • 5-slot ATX-supported PICMG 1.3 Bus Passive Backplane

    FAB109 - Axiomtek Co., Ltd.

    The FAB109 features a PICMG 1.3 CPU card slot, one PCIe x16 slot and three PCIe x1 slots, and built in a 24-pin ATX power connector and 8-pin connector for thermal detected board. Two high speed USB 2.0 ports are featured. The FAB109 is compatible with Axiomtek's AX60501 and AX6052 chassis.

  • 20 Slot, 3U PXI Chassis

    GX7300 Series - Marvin Test Solutions, Inc.

    The GX7300 Series mainframes are 20-slot PXI chassis that can accommodate up to 19 instruments as well as a PXI controller (an embedded CPU or a PXI bus expander interface such as a MX interface). The 3U form-factor provides a compact test system foot print and provides users with the flexibility to employ both PXI and Compact PCI 3U modules.

  • CN67XX Packet Processor, PrAMC Based

    AMC735 - Vadatech Inc

    The AMC735 is a 10-Gigabit Ethernet (10GbE) AdvancedMCTM (AMC) module which includes an on-board line rate multi-core packet processor based on Cavium CN67XX CPU. VadaTech offers this product in a mid size (full size optional) form factor compliant to the AMC.1 and AMC.2 specification, the AMC735 is based around the Cavium OCTEON CN67xx processor which has been specifically designed to intelligently process Ethernet packets at line-rate. The number of processor cores, speed grade, and amount of DDR3 memory is customizable based on customer needs.

  • Camera Link Adapter Module For FlexRIO

    NI

    The Camera Link Adapter Module for FlexRIO supports 80‐bit, 10‐tap base‐, medium‐, and full‐configuration image acquisition from Camera Link 1.2 standard cameras. You can pair the Camera Link Adapter Module for FlexRIO with a PXI FPGA Module for FlexRIO for applications that require bit‐level processing and very low system latency. With the Camera Link Adapter Module for FlexRIO, you can use the FPGA to process images from the camera in-line before sending the images to the CPU, enabling more advanced preprocessing architectures.

  • PXI/cPCI Modular Embedded Controller - PXI 2.0/PCIe 3.0 Compatible, Max 512MB DRAM (256MB Installed)

    TE9500-1200 - TEAM SOLUTIONS, INC.

    TSI's modular approach to PXI embedded controllers provides maximum flexibility and upgradeability for most, if not all, PXI embedded controller requirements. The TE9500 series of embedded controllers is based on the industry standard ETX (embedded technology extended) SOM (system-on-module) form factor. Whether you choose a power saving Celeron CPU or a high performance mobile Pentium III, the TE9500ís integrated interfaces and upgradeable options apply across all models of the TE9500 series of controllers. The TE9500 series gives you the ability to control your controller.

  • 6U Processor Board

    VP62107 - LinkedHope Intelligent Technologies Co.,Ltd.

    VP62107 supports Intel® Xeon-D Processors up to D-1577(16x 1.3GHz). Based on Broadwell microarchitecture, Xeon® Processor D-1577 possessor has 16 computing cores sharing 24MB L3 Cache, and its base operating frequency is 1.3GHz. VP62107 also supports Intel Turbo (automatic overclocking) technology enabling CPU maximum operating frequency up to 2.7GHz. By using Turbo technology of VP62107, users do not have to increase the cost or complexity of the system configuration just to meet the demand of system peak computing performance.

  • 8-slot ATX-supported PICMG 1.3 Bus Passive Backplane

    FAB116 - Axiomtek Co., Ltd.

    The FAB116 features a PICMG 1.3 CPU card slot, one PCIe x16 slot, three PCIe x4 slots, three PCI, and built in a 24-pin ATX power connector and 8-pin connector for thermal detected board. Two high speed USB 2.0 ports are featured. The FAB116 is compatible with Axiomtek's AX60551 and AX60552 chassis.

  • 3U CompactPCI Serial 5-slot SSR w/ RTM no Ethernet

    1CPCIS-305-R010 - ELMA Electronic, Inc.

    3U CompactPCI Serial Backplane with 5 CPCI-S.0 slots, system slot right, with rear IO: 1x CPCI-S.0 CPU slot, 4x CPCI-S.0 peripheral slots, with connectors for RTMs (RearTransition Modules) in slots 2 to 5, system slot (Slot 5) has one connector for RTM -> 5RJ6 - no Ethernet on the backplane

  • RA Family Of Arm-based MCUs

    RA6 - Renesas Electronics Corp.

    The RA6 Series offers the widest integration of communication interfaces as well as the best performance level. These MCUs deliver up to 120MHz of CPU performance using an ArmⓇ CortexⓇ-M4 core and a memory range from 512kB to 2MB Flash. The series offers Ethernet, USB Full Speed and USB High Speed, QSPI, CAN, and TFT display driver integration. And, its embedded Secure Crypto Engine is full of features you can leverage in your higher-level solutions. The RA6 Series addresses a broad range of applications for IoT endpoints such as white goods, meters, and other industrial and consumer applications.

  • Server Monitoring Software

    Mindarray Systems Pvt Ltd

    Motadata is an integrated server monitoring software & tool that delivers insightful details of all critical server performance parameters like hard disk capacity, CPU utilisation, memory utilisation and bandwidth utilisation from an intuitive web console. Our server performance monitoring allows a sysadmin to stay on top of server downtime and performance issues. This server monitoring software has the capability to monitor all types of IT infrastructure servers in both consolidated and distributed workload conditions. Identify server performance issues like resource utilisation, application downtime and its avg. response time.

  • Smart Camera

    x86 Quad-Core - ADLINK Technology Inc.

    ADLINK's new generation x86 NEON-1040/1020 features 4MP 60fps global shutter sensor and the Intel® Atom™ quad core 1.9 GHz processor, featuring minimal footprint and rugged IP67-rated construction. The quad core CPU increases computing power and FPGA coprocessors and GPU deliver advanced image processing, both beyond the capabilities of conventional smart cameras. Rich software support and API compatibility enable easy migration from original x86 platforms, eliminating software and development language burdens across the platform, reducing time to market.

  • Open VSwitch With DPDK Ready Software Development Kit

    AXPacket 1.0 - Axiomtek Co., Ltd.

    AXPacket is a software development kit integrating Open vSwitch V2.8 (OVS V2.8) with the Data Plane Development Kit V17.05.2 (DPDK V17.05.2). The AXPacket enables developers to accelerate their network development without increasing any cost. It has a user friendly UI and smooth installation procedure to help software developers to minimize the effort of fine-tuning performance. The AXPacket offers a wizard type procedure to guide the user through installation and configuration.With the AXPacket, software developers can install OVS with DPDK (OVS-DPDK) and parameters for CPU cores, Hugepages, and NIC ports on Axiomtek’s network appliances with just a few selections.

  • Mobile I/O Expander & Keypad Controller

    Analog Devices Inc.

    Analog Devices' family of mobile I/O expanders are ideal for smartphone designs and portable devices that require a large extended keypad and/or expanded I/Os such as inventory scanners, medical equipment, and meter readers. Microprocessors in portable systems are GPIO constrained due to the number of functions they must interface with and control. They are also power hungry, making them inefficient for debouncing, polling, and key press scanning algorithms. ADI’s family of mobile I/O expanders offloads key scan and GPIO functions from the CPU, freeing up the processor for higher priority functions while saving energy.

Get Help