Product

Banana-Triax Adapter For 4‑Wire (Kelvin) Connection

N1297B

-

Keysight Technologies

N1297B - Keysight Technologies

The N1297 Series is a collection of banana-triax adapters for the Keysight B2900 Series precision source measure unit (SMU). It consists of both 2-wire as well as 4-wire connection requirements.

Product

Adapter & DC Block

-

RF-LAMBDA Inc.

RF-LAMBDA Inc.

RF Lambda’s DC blocks are used to prevent DC signals from passing through a coaxial RF interface. They are low IL and wideband. RF Lambda’s line of adapters are used to connect RF signals using different connector options.

Product

2.92mm to ProBus Probe Adapter

L2.92A-PBUS

-

Teledyne LeCroy

L2.92A-PBUS - Teledyne LeCroy

The Teledyne LeCroy LabMaster 10 Zi oscilloscope utilizes precision 2.92mm input connectors to achieve up to 36GHz of input bandwidth. But some applications may require the use of lower-bandwidth probes for performance and cost reasons.The L2.92A-PBUS adapter converts the 2.92mm interface to a ProBus interface. This brings the benefits of a wider selection of probes to the LabMaster 10 Zi from high-impedance ZS active probes to the high-bandwidth WaveLink differential probing system. Full probe power and control is provided through a built-in LEMO interface.

Product

Electric Vehicle Charging Station EVSE Test Adapter

FEV100

-

Fluke Corporation

FEV100 - Fluke Corporation

Test the safety and performance of a type 1, level 1 or level 2 electric vehicle ac charging stations (EVSEs) with the Fluke FEV100. This test adapter simulates the presence of an electrical vehicle, allowing you to conduct tests in combination with appropriate test instruments such as a digital multimeter or oscilloscope.

Product

Termination

WTER-6N5

-

Warison Technology inc

WTER-6N5 - Warison Technology inc

Warison provides wide range of wireless passive coaxial components, includes Adapters, Attenuators, Coaxial Cables Assemblies, DC Blocks, Filters, Isolators & Circulators, Probes & Terminations. With outstanding capability of development and design, Warison is able to custom the spec based on customer��s demand. All Warison��s products pass inspection and electronic performance test before shipping out. It is our principal to deliver the best solution to all our clients.

Product

Universal Compression Tester for Gasoline Engines

34000

-

S & G Tool Aid Corp

34000 - S & G Tool Aid Corp

Test compression on all domestic and foreign cars and most trucks. Adapters fit vehicles with 14mm and 18mm plugs including long reach and 5/8" hex plugs. Flex hose eliminates need to remove auxiliary equipment such as power brakes and steering, air conditioning and manifold. Screw in adapters guarantee accuracy over push-in type testers. Quick side release valve permits retest without removal of adapters. Gage ranges 0-300 PSI and 0-21 BAR. Supplied in storage pouch.

Product

Automatic Transmission & Engine Oil Pressure Tester

34500

-

S & G Tool Aid Corp

34500 - S & G Tool Aid Corp

Check oil pressure in automotive transmissions and engines. Adapters provide coverage of most domestic and imported cars and light trucks. Gage calibrated from 0-600 PSI (0-4,000 kPa & 0-7.0 BAR). Includes 6 feet of oil proof hose and 10 assorted fittings. Supplied with instructions in a durable vinyl pouch.

Product

Adapter, 2.4 mm (m) to APC-7, DC to 18 GHz

11902A

-

Keysight Technologies

11902A - Keysight Technologies

The Keysight 11902A is a 2.4 mm male to APC-7, metrology grade adapter with dc to 18 GHz operation.

Product

Test Fixture Adapters for In-Circuit Test Fixtures

-

Circuit Check, Inc.

Circuit Check, Inc.

Circuit Check test fixture adapters are utilized when the target ICT tester is not available or has been replaced with a newer technology tester. The tester adapter will often allow existing test fixtures from one test manufacturer to be utilized on another manufacturer test platform, eliminating the need for replacement fixtures. Contact Circuit Check to discuss your tester and fixture combinations for the best choice of a cost effective solution.

Product

PCI bus Test Adapter

pcibus1b

-

PC Engines Gmbh

pcibus1b - PC Engines Gmbh

All important PCI bus signals routed to pin headers for easy connection of logic analyzer. Filter assistance for logic analyzer: D-FF to delay FRAME# by one cycle. To see actual PCI data transfers, filter for FRAME2# high + FRAME# low (address phase), or IRDY# low and TRDY# low (data phase). Business card size. Notched for 5V PCI bus (can be used on 3.3V bus with mechanical modification).

Product

PCB Adapters

-

Virginia Panel Corporation

Virginia Panel Corporation

Signal PCB AdaptersQuadraPaddle & TriPaddle signal technology adapted to a PCB with a variety of standard connector options. Allows for easy PCB integration with an interface while also offering wiring convenience. Offers "plug and play" functionality between module and instrumentation.VTAC SIM PCB AdaptersVTAC Snap-in-Module adapters provide flexibility and modularity where custom PCBs cannot. Mix and match small modular boards to create a custom solution. Move SIM PCB adapters around to optimize space, mix protocols and match with standard patchcords. Combine protocols in a VPC SIM module and swap boards as your requirements change.

Product

350 MHz DDS Signal Generator

425A

-

Novatech Instruments , Inc.

425A - Novatech Instruments , Inc.

The 425A generates sine, LVDS and LVCMOS outputs simultaneously and is programmable in 10µHz steps from 250kHz to 350MHz and includes an LVCMOS Prescaler and Divider for generating LVCMOS frequencies down to 2 Hz. The 425A is controlled by an RS232 serial interface. Phase can be programmed with 14-bit resolution. The Frequency is accurate to 1.5ppm when using the on board TCXO timebase or you can use an external timebase. It requires 5 VDC power. A Line Voltage AC Adapter is included. SOF8_425 windows software is also included.

Product

Hand Adapters / Special Adaptations

-

adaptronic Prüftechnik GmbH

adaptronic Prüftechnik GmbH

*Hand adapters*Combi adapters*Service adapters*Rigging harnesses*Hand over adapters for engine test benches*Cockpit test systems*Special test benches ...*For every adaptation job the fitting adapter - application specific, reliable, robust with threaded and spring loaded contact pins.

Product

Passive XMC-to-PCI Express Adapter

5944

-

Technobox, Inc.

5944 - Technobox, Inc.

The Technobox, Inc. P/N 5944 is designed to adapt a single-wide XMC card to a 16X PCI Express slot. The 5944 supports both P15 and P16 and allows access to PN4 signal via the adapter's DIN connector. The A and C rows of a 96-pin DIN connector connect with the 64-pin user I/O connector (J4/P4) on the mezzanine card, permitting internal connection of rear I/O.

Product

USB to TTL Adapter

SKU-012-0X

-

Amfeltec Corp.

SKU-012-0X - Amfeltec Corp.

The USB to TTL adapter connects the Serial UART to the standard USB port for testing and monitoring functionality. The Adapter facilitates ease of use and helps to reduce board space and cost.

Product

I2C Adapter MS

LAN

-

Coptonix GmbH

LAN - Coptonix GmbH

*No driver necessary*Integration of communication via DLL and TCP / IP & UDP protocol possible*Open interface description enables communication without a DLL*Supports TCP / IP, UDP and DHCP

Product

SMD Adapter Kit

PK703

-

Teledyne LeCroy

PK703 - Teledyne LeCroy

SMD Adapter Kit.

Product

OX 774 WDM Node

-

Analog Systems

Analog Systems

- Two Output - Sensitivity: -16dBm- Output Level: 85 dB- Operates With 12V ONU Adapter- DC to DC Cable-2.5 / 1.5 mm Plug provided- Use with PSP (STB Adapter)

Product

PLCC-to-DIP Adaptor

Series 652000/653000

-

Aries

Series 652000/653000 - Aries

PLCC to DIP Adapter. Converts PLCC packaged ICs to DIP footprints. Ideal for prototyping and testing/evaluation. Available with PLCC sockets or PLCC pads on top side. Consult factory for panelized form or for mounting of consigned ICs.

Product

PCI to PC/104+ Bus Adapter

327/328

-

Sensoray Co., Inc

327/328 - Sensoray Co., Inc

Model 327 and 328 are bus-to-bus adapters that allow operating a PCI board from a PC/104+ card stack. They allow selection of important PC/104+ signals using jumper plugs, thereby avoiding the requirement of using hardwired settings. Model 327 aligns the PCI board parallel to the PC/104+ boards, while model 328 places it perpendicular.