Simulation Software
computer programs that emulate the function of a system, predict expected performance, evaluate the impact, and assess design alternatives.
See Also: Simulation, Simulators, Simulation Testing, SPICE, Predictive Analysis
-
Product
Polarization Lambda Scan Software License
N7700100C
-
Enables polarization-dependent swept-wavelength multichannel measurements with the PAS LS engine and PAS IL/PDL engine, as well as measurements without varying polarization with the PAS LS engine and PAS FSIL engine.
-
Product
Fixture Building Software
FixGenius
-
Tests show that FixGenius’ rule-based probe-mapping algorithms reduce pin deflection by up to 25% compared with traditional fixturing packages. FixGenius comes with a powerful Fixture Editor that allows the user to change the probe mapping. If a solution is mathematically possible, FixGenius’ algorithms will find it, and pick the one with least deflection. If the job simply cannot be done with one single fixture, FixGenius will fully automatically split the test into multiple fixtures or into fixture and flying probe test sets, with guaranteed test integrity.
-
Product
PCB Systems Vibration and Acceleration Simulation Solution
Xpedition
-
As the industry’s market share leader in PCB design software, the Mentor Graphics® Xpedition product augments mechanical analysis and physical testing by introducing virtual accelerated lifecycle testing much earlier in the design process. This is the industry’s first PCB-design-specific vibration and acceleration simulation solution targeting products where harsh environments can compromise product performance and reliability, including the military, aerospace, automotive and industrial markets. Traditional, physical HALT (highly accelerated lifecycle testing) is conducted just before volume manufacturing, and requires expert technicians, which can result in costly schedule delays. Bridging mechanical and electronic design disciplines, the Xpedition product provides vibration simulation significantly faster than any existing method. This results in increased test coverage and shortened design cycles to ensure product reliability and faster time to market. The Xpedition component modeling library is the most extensive in the industry, comprised of over 4,000 unique 3D solid models which are used to create highly defined parts for simulation. The 3D library allows users to easily match geometries to their 2D cell database. Designers can assemble the parts models on board and automatically mesh them for performance analysis, including stiffeners and mechanical parts. The system modeling tool is ultra-fast since it can model over 1,000 components per minute.
-
Product
Close Match Solar Simulators
-
We design and manufacture a wide range of world leading solar simulators that meet and surpass the IEC, ASTM and JIS international standards. Our close spectral match solar simulators are used across the globe in world-leading laboratories. Our award winning Unisim solar simulators are used in both research and development work as well as 24/7 production facilities and are regularly cited in the latest photovoltaic research literature.
-
Product
Software Accelerating Sensor Collection & Real-Time Analytics
BlackStack
-
Introducing BlackStack, a software-accelerating sensor collection and real-time analytics platform. BlackStack enables faster processing at the edge, providing commercial grade infrastructure solutions, and facilitates quicker and more intuitive advanced searches resulting in to-the-second decision abilities.
-
Product
Media Meter Software Tool
-
Dolby Media Meter is an innovative software tool that accurately measures loudness the way your viewers experience it in programming for broadcast, packaged media, cinema trailers, video on demand (VOD), and games. Differences in audio levels between programs and channels, or between programs and commercials, are a major annoyance to TV viewers. Although easy to hear, these differences are much more difficult to measure. And without accurate measurement, you can't regulate these irritating shifts in sound level.
-
Product
Software Products
-
Working on the premise to ease system operation, increasing inspection capabilities while providing full traceability MVP Software Products encompass a range of tools driven directly from the data generated at the AOI systems, as well as optional links back to the production lines and monitoring of the data they generate also.
-
-
Product
Software
Triangular Voltage Sweep (TVS) Option
-
Materials Development Corporation
The TVS method measures the current-voltage characteristics of an MOS device at high temperature. This technique, which allows direct measurement of mobile ionmovement, has higher sensitivity and is much faster than the conventional CVBT measurement.
-
Product
Integrated Performance Monitoring Software
SQlive
-
SQlive™ is compact, ready-to-install software for monitoring the performance of streaming video, IPTV and Voice over IP. Compact and highly resource efficient, SQlive can be embedded into mobile handsets, media players, set-top boxes, home gateways and other CPE and end system devices.
-
-
Product
AOI Programming Software
ProntoAOI
-
ProntoAOI used by electronics manufacturers will quickly program your Automatic Optical Inspection (AOI) machines. Program most popular AOI Equipment such as YES Tech, Mirtec, Orbotech, Agilent, Omron, CyberOptics, Viscom, Quad, Machine Vision Products (MVP), ViTechnology, Landrex Technologies, Christopher Associates / Marantz, Photon Dynamics, Camtek, etc.
-
Product
Network Traffic Monitoring Software
-
Network Traffic Monitor or NetFlow Analyzer, primarily a bandwidth monitoring tool, lets you check and monitor your bandwidth / traffic pattern and determine, how network bandwidth is being utilized. Get real-time insights into bandwidth usage or the amount of network traffic caused by IP addresses, protocols, or programs. Create customized reports like Top Applications by Traffic, Top Conversations by Traffic, Top Traffic Destinations by Host IP, Top Traffic Sources by IP address, Top Traffic Receivers by IP and more.
-
Product
Software Development Kit for ARINC 615A Targets
A615A-TGT-SDK
-
Avionics Interface Technologies
ARINC 615A Data Loader Target development kit enables systems developers to embed ARINC 615A compliant data load functionality into avionics target applications.
-
Product
Test & Simulation Interface for PCI-X
PCI-X-C1760
-
Avionics Interface Technologies
HS1760/MIL-STD-1760E Test & Simulation Interface for PCI-X
-
Product
Software for System-Based Protection Testing
RelaySimTest
-
RelaySimTest is a software solution for system-based protection testing with OMICRON test equipment that takes a novel, future-oriented approach: the test is independent of relay type and relay manufacturer and the often very extensive parameter settings. Instead, it completely focuses on the correct behavior of the protection system. This is made possible by simulating realistic events in the power system.
-
Product
Tracking Analysis Software
DS-0322
-
This software enables tracking analysis with high-speed (calculation speed: approx. at 20ms/4-ch), high-resolution (1000 blocks max.) and high-accuracy (more than 100dB dynamic range). It can plot rotation-tracking diagram during calculation, and also can set and plot the diagram of intended order or frequency after the calculation. *DS-0321 series FFT analysis software is required.
-
Product
Software
Driver Module
-
Consistent Driver module for various target Environments to perform Emission homologation, certification, RDE, range, customer FE tests with human drive styles for all kinds of cycles
-
Product
LC Software
LabSolutions CS
-
LCs and GCs are used extensively in quality control and research and development departments in a wide range of industries, including pharmaceutical, chemical, and food. Recently, an increasing demand for food safety and environmental analysis and measurement has led to a dramatic increase in the number of samples being analyzed which, in turn, has resulted in demands for faster, easier-to-use instruments and software. In the pharmaceutical industry, compliance to regulations and guidelines, such as CSV and PIC/S GMP, U.S. FDA 21 CFR Part 11, Data Integrity and so on, and the proper, efficient management of instruments and analytical data are required. With this background, faster, more efficient management of instruments and data is essential. LabSolutions is a network-compatible analysis data system capable of meeting these needs.
-
Product
SAM Software
-
PVA TePla Analytical Systems GmbH
The high performance of our systems derives not least from their interaction with our specially developed software. This enables the comprehensive and precise mapping and analysis of all SAM data software.
-
Product
USpectrum Software & Apps
-
United Power Research Technology Corporation
uSpectrum accessory products allows you to connect up with your UPRtek devices, giving you remote control, and full workstation screen view and keyboard access (depending on UPRtek device)
-
Product
LC Software
LabSolutions Connect
-
LabSolutions Connect can perform everything from execution of the optimization of MRM transitions and interface parameters to checking of the optimization results, creation of method and batch files for quantitative analysis, and quantitative calculations. After creating an LC template method file with LabSolutions LCMS, afterwards, the entire process can be performed by LabSolutions Connect MRM.
-
Product
Mobile Computers Software & Tools
-
A wide range of software and tools for a simplified, integrated solution to support Datalogic’s mobile computers for developers and system integrators.
-
Product
Universal 3D Metrology Software Platform
PolyWorks
-
Defining the cutting edge of 3D metrology, the PolyWorks software suite maximizes productivity, quality, and profitability when integrating 3D measurement technologies into an industrial manufacturing process. From part and tool design and prototyping down to final inspection of assembled products, PolyWorks offers advanced solutions to cover the complete product development cycle. Interfacing directly with major brands and technologies of single-point and point cloud 3D measurement devices through plug-in extension modules, this universal platform also supports a wide array of native point cloud and polygonal model file formats.
-
Product
Android Software
SonarMite 'Plus' App
-
The SonarMite+ App is based on the free SonarMite App but offering additional features. The software is an Android App designed to work with the popular SonarMite Bluetooth Echo Sounder used in hydrographic surveying applications. With the demise of Hyperterminal as a standard terminal application the end user is left with little choice for a simple communications program with serial data devices. Connecting via Bluetooth is cleaner than USB cable, there are no wires and the connection is independent of baud rate and other serial port settings. Most terminal programs are not easily configured with commands to directly interface with instruments such as SonarMite.
-
Product
Software
Mosaic 1.6
-
Fuzhou Tucsen Photonics Co.,Ltd
In the field of high-end research microscopy, the pursuit of ever increasing camera performance is endless. In order to capitalize on the performance advantages of the camera, the application software plays a very important role. Tucsen has addressed these image processing needs with its all new Mosaic package. Encapsulating image processing algorithms, extensive industry applications, it reflects Tucsens ongoing commitment to provide users with more professional image analysis and processing solutions!
-
Product
WECO Software Solutions
-
WECO pioneered meter shop software for Electric Utilities over 35 years ago and continues to lead in this arena. From Meter Testing to Meter Asset Management, WATT-Net™ Software is the most comprehensive asset and smart grid device management database software package available that combines powerful functionality and ease of use, specifically designed for the metering industry.
-
Product
Cockpit Software for Vision Analyzers
-
COCKPIT™ offers the utmost in flexibility. Lab managers use the PC software for Vision analyzers to consolidate measurement results and statistics from multiple locations in one central lab. By taking advantage of a direct Ethernet or a LIMS-connection, COCKPIT™ builds a bridge between the lab and Grabner vapor pressure testers in the field. Access via VPN tunnel adds an extra layer of security to the data transfer between Vision analyzers and COCKPIT™ software.
-
Product
QW-AddIn For Autodesk® Inventor® Software
-
QW-AddIn for Autodesk® Inventor® Software is a QuickWave plug-in for Autodesk® Inventor® Software, a wide-spread mechanical tool, allowing defining a complete project for electromagnetic simulation, also periodic structures and axisymmetrical structures (V2D), directly in the popular CAD environment. A set of self-explaining dialogues provides very convenient tool for setting the electromagnetic properties such as assigning the materials, adding ports, boundary conditions, setting postprocessings and excitation parameters.Automatic mesh generation using Automatic Meshing Intelligent Generation Option (AMIGO) optimises the meshing taking into account requested wavelength resolution in all media, while avoiding unnecessarily small cells. Additionally QW-AddIn for Autodesk® Inventor® Software can be used for optimisation and parameters sweep with QW-OptimiserPlus.QW-BHM is available and heating parameters can be defined together with rotation in XY plane along axis parallel to Z axis. Creating proper axis of rotation can be done by selecting edge or solid body from the project. It will contain the middle point of selected object and its location can be modified either with the mouse or by entering new coordinates.
-
Product
3D Surface Texture Analysis Software
TrueMap 6
-
Rendering styles: solid, wireframe, wireframe + pointsFull control of surface lighting, including direction, and ambient shadingRendering options including side walls, grid lines, and countour linesEdit the z exaggeration to help visualize surface deviationsRender the axes labels relative to the surface mean, maximum, minimum, or unchanged from the values stored in the fileRender the surface using a gradient to represent the surface heights, or use a solid color, or even use the true color values from the data file if they are availableMultiple options for gradients and even an optimization feature to use the height distribution
