Wafer Probers
bring the wafer in contact with the set of wafer probes.
See Also: Probers, Wafer, Flying Probes, Thermal Chucks
-
Product
High Resolution Wafer Thickness & Thickness Variation Gauge
MX 10x series
-
The MX10x series measure thickness and thickness variation on silicon wafers. It has a resolution of 10 nanometers and can be adapted to different thickness ranges within a few seconds.
-
Product
WAFER MVM-SEM® E3300 Series
E3310
-
The E3310 is a WAFER MVM-SEM®* for next generation wafers, supporting 1Xnm node process development and volume production at the 22nm node and beyond. With its high-speed carrier system employing a dual arm vacuum robot, and low-vibration platform to improve measurement accuracy, the E3310 delivers high throughput and performance for wafer measurements. Its multi detector configuration and unique 3D measurement algorithm also enable stable, high-accuracy measurement of 3D transistor technologies such as FinFET. The E3310 makes a significant contribution to reducing process development turnaround time and improves productivity for next-generation devices.
-
Product
Contactless One-Point Wafer Thickness Gauge
MX 30x
-
The MX30x series are manual one-point Thickness gauges for silicon wafers.
-
Product
01 With Soldering Eyelets | 12 Positions | M10 | 2 Wafers
01-2xxx-00/30xx-12-N
-
Multi wafer compact selector with 30° detent angle, 6 mm shaft diameter, 25'000 switching cycles and with up to 6 Ncm switching torque
-
Product
Wafer Lifetime Measurement with Photoluminescence Detector
WCT-120PL
-
Measure the calibrated carrier-recombination lifetime of a silicon wafer using both the standard method and the photoluminescence meth
-
Product
Wafer Sorter and Inspection
SolarWIS Platform
-
Eliminating the opportunity for problematic wafers to enter cell manufacturing lines greatly improves output and yield. ASM AE’s wafer sorter features 3D area inspection capability to inspect wafer thickness, total thickness variation (TTV), saw marks, as well as wafer bow and warpage. SolarWIS also includes modules that can inspect for stain, geometry, micro-cracks, edge chips, resistivity, P or N conductivity and lifetime.
-
Product
Stand Alone Wafer Sorter
MicroSORT
-
The Microtronic MicroSORT semiconductor wafer sorter is designed to maximize throughput while minimizing wafer handling in a user-friendly operating environment. This stand-alone semiconductor wafer sorter enables sophisticated semiconductor wafer sorter routines for up to 4 wafer-cassette platforms. MicroSORT semiconductor wafer sorter reads OCR scribes from the top, bottom, or simultaneously, allowing for enhanced semiconductor wafer tracking and sorting. The MicroSORT semiconductor wafer sorter’s basic functions include the ability to move, compress, randomize, find, align, verify, and split semiconductor wafer lots. With our virtual tweezer mode, an operator can click on wafer icons to move wafers between cassettes, read semiconductor wafers, and swap wafer positions.
-
Product
04 With Pins For PCB Or Soldering Eyelets | 12, 24 Positions | 1 - 4 Wafers
04-Selector-Overview
-
Very robust, multi wafer selector with up to 24 positions, switching torque up to 20 Ncm and a rotational life up to 25'000 cycles
-
Product
04 With Pins For PCB | 2 Wafers | 24 Positions
04-2xx3-20/70-xx
-
Very robust, multi wafer selector with 15° detent angle, switching torque up to 20 Ncm and a rotational life up to 25'000 cycles
-
Product
Wafer Analysis Systems
Tropel®
-
Corning Specialty Materials has a long heritage of providing solutions to semiconductor equipment manufacturers. The Tropel line of wafer analysis equipment enables measurement of wafer substrates from 2” to 450mm regardless of material type and surface finish.
-
Product
Wafer & Die Inspection
-
SemiProbe wafer inspection system (WIS) examines, locates and identifies defects created during wafer manufacturing, probing, bumping, dicing or general handling. This provides microelectronic device manufacturers with accurate, timely quality assurance and process information. The WIS has single sided and double sided wafer mapping capabilities and can improve efficiency, reduce manufacturing costs, increase yields and shorten time to market.
-
Product
Wafer Probe Heads
-
WLCSP test is the applying final test conditions at Wafer Level. WLCSP testing is driven in lowering the cost of test of devices through economical methods of manufacturing and testing.
-
Product
Die-To-Wafer Bonding Systems
-
Several different D2W bonding methods are available and selected depending upon the application and customer requirements. In direct placement D2W (DP-D2W) bonding, the singulated dies are bonded to the target wafer one by one using a pick-and-place flip-chip bonder. Plasma activation and cleaning of the surfaces of the dies on the handler wafer are essential steps for establishing a high-yielding bond and electrical interface between the dies and target wafer. This is where the EVG320 D2W activation system comes in.
-
Product
Ambient Temperature Vacuum Wafer Chucks
-
6" (152mm) Vacuum Wafer Chuck for General Purpose Ambient Temperature testing with a Stainless Steel vacuum wafer surface
-
Product
Wafer Thickness, TTV, Bow and Warpage
-
ALTO-TTV FAMILY OFFERS THE SPEEDY MEASUREMENT OF WAFER GEOMETRY PARAMETER, MORE IMPORTANTLY, WE CAN AUTOMATE THE TOOL TO HANDLE FROM THIN WAFERS TO PERFORATED, WARPED, BUMPED, AND TAPE-FRAMED WAFERS. OPTIONAL SORTER AND SHIPPING JAR UNPACKING FUNCTION AVAILABLE.
