Product

Large Rotating Disc Optical Chopper

L340CD

-

Scitec Instruments Ltd

L340CD - Scitec Instruments Ltd

An optical chopper based on 200 mm diameter discs. The larger disc size allows larger diameter beams to be chopped.

Product

Differential Pressure Transmitter

616D

-

DWYEROMEGA

616D - DWYEROMEGA

The Series 616D Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The 616D housing is specifically designed to mount on a 35 mm DIN rail in a panel

Product

Thermally Protected Ballast Heating Test Chamber

TPB-UL935

-

Lisun Electronics Inc.

TPB-UL935 - Lisun Electronics Inc.

Working room dimension: 610×610×610mm• Temperature range: RT+10℃～+100℃• Materials of inner and outside chamber: Senior stainless steel• Insulation Material: Ultra-fine glass wool insulation material• Heater: Dedicated strip heater (heating surface area of 300 × 40 mm), each group three hundred watts, a total of four groups, with the power supply in parallel.• Special wooden test sample holder• Third gear temperature measurement points (at any time monitoring and conversion)

Product

Basic Contact Probes (75 Mil) F07521S064P200HP

1010210

-

FEINMETALL GmbH

1010210 - FEINMETALL GmbH

The Basic Contact Probes (75 mil) F07521S064P200HP are precision-engineered components designed for high-reliability applications. With a pitch of 1.90 mm (75 mil) and a robust temperature range of -45°C to +80°C, these probes provide exceptional performance in a variety of environments. The incorporation of advanced materials and detailed specifications ensures durability and reliability under demanding conditions. The probes are characterized by a maximum travel of 6.40 mm, providing sufficient flexibility for various applications, while the compact design ensures easy integration into your systems.

Product

SINE FBI Charts

-

Applied Image, Inc.

Applied Image, Inc.

There are two SINE Sinusoidal arrays designed for FBI applications: the SINE M-13-60-S-RM and the SINE M-13-60-FBI Kit.The SINE M-13-60-S-RM was designed jointly by the Federal Bureau of Investigation, of Washington DC, and MITRE, of Bedford MA. The primary function of this Target is for computing Modulation Transfer Function (MTF) evaluation in live scanner fingerprint systems for conformance to Integrated Automated Fingerprint Identification Systems (AFIS) image quality requirements. The array is on reflective material measuring 16mm x 16mm with sinusoidal arrays ranging in frequency from 1.0 to 10.0 cycles per mm; with nominal modulation of the sinusoidal areas at 60%. The top and bottom rows are density scales, from 0.20 to 1.20 densities.The SINE M-13-60-FBI Kit consist of two individual components, the SINE M-13-60-1X-RM and the RR1-N-RM Ronchi Ruling grating.

Product

Switch Probes (Normally Open (NO)) F88706B100G150S3

1039448

-

FEINMETALL GmbH

1039448 - FEINMETALL GmbH

The Switch Probes (Normally open (NO)) Model F88706B100G150S3 is an essential tool designed for precision in testing applications. Part of the F887-NO family, these basic contact probes boast a compact pitch of 4.00 mm, making them suitable for fine electronics work. With a temperature range of -45°C to +100°C, these probes can withstand various environmental conditions, ensuring reliable performance in diverse settings. The innovative design features a nominal travel of 4.00 mm, with maximum travel extending up to 5.00 mm, providing flexibility in performance without compromising on accuracy. In terms of electrical performance, the probes can continuously handle current up to 10.00 A, and a contact resistance as low as 40.00 mΩ ensures efficient signal transmission. The switch travel of 1.70 mm contributes to reliable operation, enhanced by a preload of 60.00 cN and a spring force of 150.00 cN. The precise pointing accuracy of +/- 0.10 mm makes these probes ideal for high-precision applications, with compatibility for M3X0.35 threaded assemblies and a compact design featuring a total length of 25.00 mm. Overall, the F88706B100G150S3 probes embody quality and precision in electrical testing, equipped with advanced technical specifications that meet the demanding needs of the industry.

Product

Standard 1.53 (43.00) - 4.00 (113.00) High Performance Lead Free Probe

LFRE-72T20-4

-

ECT

LFRE-72T20-4 - ECT

Current Rating (Amps): 3Average Probe Resistance (mOhm): 15Test Center (mil): 50Test Center (mm): 1.27Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 500,000Overall Length (mil): 1,700Overall Length (mm): 43.18

Product

Switch Probes (Normally Open (NO)) F88516B180G900SM

1004334

-

FEINMETALL GmbH

1004334 - FEINMETALL GmbH

The Switch Probes (Normally open (NO)) model F88516B180G900SM is designed to offer superior performance in a variety of applications. With a sturdy build and reliable functionality, these probes operate efficiently within a temperature range of -45°C to +100°C, making them suitable for diverse environmental conditions. The basic contact probe design is part of the F885-NO family, recognized for its precision and durability, featuring a nominal travel of 4.00 mm and a maximum travel capability of 5.00 mm. Ideal for tasks requiring high accuracy, the probes provide a pointing accuracy of ±0.08 mm.

Product

60 GHz Systems and Modules

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

The Pasternack / Vubiq 60 GHz development system provides rapid evaluation of Pasternack’s 60 GHz waveguide modules and customer prototyping for system development. This 60 GHz developer kit is created from a partnership between Pasternack and Vubiq (pronounced “View-bik”), an industry expert in designing 60 GHz RF systems. Our 60 GHz wireless development system makes it easy to design new products and applications in the emerging unlicensed millimeter wave ISM band.

Product

Basic Contact Probes (75 Mil) F07533S064L150

1017283

-

FEINMETALL GmbH

1017283 - FEINMETALL GmbH

The Basic Contact Probes (75 mil) F07533S064L150 represents the pinnacle of precision engineering designed for a wide range of applications. With a robust operational temperature range of -45°C to +80°C, this probe ensures reliability in diverse conditions. The advanced design includes features like a continuous current capacity of 4.00 A, facilitating stable performance even under heavy load. The probe is engineered with a typical contact resistance of only 20 mOhm, ensuring low-loss connections that enhance system efficiency.In terms of mechanical specifications, the Basic Contact Probe boasts a preload of 70.00 cN and a spring force of 150.00 cN, delivering superior performance with a nominal travel distance of 4.30 mm and maximum travel up to 6.40 mm. Pointing accuracy is another highlight, with a precision of +/- 0.08 mm, setting new standards for reliability in contact probing applications. Coupled with its dimensions—total length of 33.10 mm, projection height of 8.20 mm, and meticulously engineered tip and barrel diameters—this probe is crafted from high-quality materials for enhanced durability and consistency in performance.

Product

Cylindrical Professional Micrometer

-

Smartech Inc.

Smartech Inc.

• Automatic wake-up by moving the measuring spindle (system S.I.S)• Sleeping mode after 20 min. of no use (system S.I.S)• Position memorized in sleeping mode (system S.I.S), absolute system*• Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according toIEC 60529, even connected• Measuring range 0-161 mm covered with 5 instruments only• Set of 3 micrometers 0-102 mm available• Quick displacement of the measuring spindle 12 mm / rotation• Adjustable measuring force 5N / 10N (versions 903.030X)• Repeatability and reproducibility never reached before• Thimble in polyacetal-copolymer

Product

Streak Camera

OptoScope S3C-1

-

Optronis GmbH

OptoScope S3C-1 - Optronis GmbH

The S3C-1 is a streak camera based on a semiconductor sensor. Like tube-based streak cameras, the S3C-1 captures changes in light along a line and records the change over time. To record the intensity values, they are sampled and stored with up to 2 GSamples/sec. The line is 65 µm wide and consists of 200 elements along its 5 mm length. Each element consists of a sensitive photodiode with a downstream amplifier.A new and special camera feature is continuous recording. This makes it possible to take recordings of events for which precise information about the time of their occurrence only becomes available after they have taken place. This "post-triggering" simplifies or allows certain applications.

Product

CT-PT-CVT Measuring

-

Shanghai Himalayal Co.

Shanghai Himalayal Co.

Testing object: S current transformer, normal current transformer, voltage transformer● Testing item: ratio error, phase error, impedance, admittance of the transformer, etc● Rated current:5A,1A ( Customized )● Rated voltage: 100V, 100/√3V, 100/3V, 110V, 110/√3V, 110/3V, 120V, 120/√3V, 120/3V, 220V (or other)● Measurement range: ratio error measurement range : 0.0001%-19.99% phase error measurement range : 0.01 ' -900 '● Error minimum resolution:ratio error:0.0001%; phase error:0.01 ' ● Communication function : provide RS232 serial communication port● Measurement accuracy: ±1%● Consumed power: less than 20VA● Dimension :460×380×160 mm● Weight: 12kg

Product

Cable Continuity Tester, SATA, ESATA Mini, Network, 21.01 mm, 45.01 mm, 47.02 mm

72-9245

-

Tenma

72-9245 - Tenma

The 72-9245 is a Mini Cable Tester for SATA/ESATA cable. Mini cable tester fits easily in your pocket or tool box.

Product

Analytical Gear Inspection Machine for Workpieces Up to  Ø 6,000 mm

KNM X series

-

KAPP NILES Metrology GmbH

KNM X series - KAPP NILES Metrology GmbH

machine structure with outstanding intrinsic accuracylarge bearing distances of guidesinherently stable granite machine base on active dampers to absorb vibrations ? no foundation requireddrive system close to center of gravitylinear motors in X-, Y-, Z- measuring axeshigh precision air- or hydrostatic bearing rotary tables (diameters from 500 to 1,800 mm) with direct drive and through holemotorized positioning of measuring column (V-axis) to the actual workpiece diameterlaser based system for safe operation