Product

High Frequency Multipin Coax Connectors

MDCX Series

-

Smiths Interconnect

MDCX Series - Smiths Interconnect

Smiths Interconnect's multipin coax connectors MDCX offer low VSWR of 1.25:1 (typ) up to 10 GHz (max mated pair), maximum overall diameter of 0.125" fitted into low-profile micro-D housing, constant 50 Ohm airline impedance.

Product

1202a High Frequency Distribution

-

Precise Time and Frequency, Inc.

Precise Time and Frequency, Inc.

The ptf 1202A High Frequency Distribution amplifier provides high performance frequency references for laboratory or system use requiring distribution at frequencies of 30MHz and above.The ptf 1202A is especially designed to distribute the high frequency input signal to 12 separate outputs, with minimum signal distortion and maximum isolation between individual output signals.

Product

Standard Transmitter

Tipix 2200

-

IRIS Instruments

Tipix 2200 - IRIS Instruments

The TIPIX 2200 is a transmitter purposely designed for deep Induced Polarisation or Resistivity sounding investigations. This transmitter is generally used together with V-Fullwavers or Elrec Pro receivers. This entry-level instrument has been designed for an ease of use and for a good productivity together with a strong protection against misuse. This very robust device has proven to be reliable even in very cold weather (up to -40°C) or in wet environment. It is able to inject up to 2200W in the soil and to inject up to 13A, so that it is suitable, even on conductive soils, to measure resistivity and IP at medium range depths. It is powered by standard generator.

Product

Audio Frequency System

Locator Set / UL 30

-

BAUR

Locator Set / UL 30 - BAUR

Cable fault location with the BAUR Locator Set / UL 30. The audio frequency system Locator Set is used to exactly determine the alignment of cables and metal gas or water pipes. With various accessories, this system becomes a universal, indispensable device for power companies, industries, installation companies and water suppliers.* Output energy up to 50 VA* Automatic or manual impedance adjustment* Charging unit and rechargeable battery integrated; battery or mains operation* Continuous or cyclical output

Product

Three Phase High Precision Reference Standard Energy Meter

SY3102

-

Hong Kong Songyang Industrial Ltd.

SY3102 - Hong Kong Songyang Industrial Ltd.

There are three ports for pulses to output. And its constants can be set automatically or manually. Types of constants can be set also: active power, reactive power, apparent power, voltage, and current.

Product

Variable Frequency Drives (VFD)

-

Unitronics Group

Unitronics Group

High performance, cost effective VFDs, ideal for both machines & process control.Unitronics VFDs offer options for both single and three phase VFDs from 0.4 kW and up to 500 kW.Unitronics VFDs can be used as a stand-alone product, or as part of a complete All-in-One package with our controllers.

Product

Signature Model High Frequency Surge Testers

S

-

PJ Electronics, Inc.

S - PJ Electronics, Inc.

Bench size performance & durability with PJ's exclusive/unique High Frequency Technology capable of testing the integrity of any turn to turn insulation, including low inductance windings. These Digital Surge Testers come standard with a rack-mounted, Tektronix TDS1002, 1 Billion Samples/sec, real time, programmable, storage oscilloscope.

Product

AC Calibration Standard

1U647-001

-

Sigma Tek, Inc.

1U647-001 - Sigma Tek, Inc.

The 1U647-001 is a low cost calibration standard used to determine if a 1U632-100 or a 1U663-100 DMU requires factory calibration. Its portability makes it ideal for field-testing. The standard generates signals that simulate the aircraft’s resolvers, rotary variable transformers (RVTs), and linear variable displacement transformers (LVDTs). The unit also generates a pulse width modulated (PWM) signal, and routes the output of an ARINC 429 source to the different DMU input channels. The calibration standard connects directly to the DMU and replaces the output signals of an active extender card. Discrete switch settings simplify testing. The unit is housed in a rugged aluminum case.

Product

Frequency Extension Heads for Vector Network Analyzers

FEV

-

Farran Technology Ltd

FEV - Farran Technology Ltd

These frequency extension modules connect to your existing test ports and leverage the inherent microwave network analyzer’s performance and features to display full port S-parameters: Two measurement architecture available: 1-path/2-port and fully reversing 2 port. Waveguide calibration kits are available as separate accessories.

Product

Standard Measuring

Standards

-

Mitutoyo Corporation

Standards - Mitutoyo Corporation

Gages, height masters, scales

Product

VME Time & Frequency Processor

VME635091-SyncClock

-

Brandywine Communications

VME635091-SyncClock - Brandywine Communications

Brandywine Communications’ VME635091-SYNCCLOCK is a time and frequency processor module that provides precision time and frequency reference to the host computer and peripheral data acquisition systems. Time is acquired from time code signals, typically IRIG B. Time is displayed on the front panel (hours, minutes, seconds) via LED digits.

Product

Digital/Analog/Frequency Measurement Module

JT 2149/DAF

-

JTAG Technologies Inc.

JT 2149/DAF - JTAG Technologies Inc.

The JT 2149/DAF is a compact, mixed-signal (Digital/Analog/Frequency) measurement module for use in JTAG Technologies’ widely-used JT 2147 (QuadPod) signal conditioning interface. The DAF module has been designed to replace a regular TAP Pod and provides 28 measurement channels plus a clock generator. When connected to a circuit board via edge connector or test fixture/jig test pins, the module enhances standard digital boundary-scan tests by enabling a series of analog and frequency measurements to be made.

Product

High Frequency Infrared Carbon and Sulfur Analyzer

CS-8820

-

Wuxi Jinyibo Instrument Technology Co., Ltd.

CS-8820 - Wuxi Jinyibo Instrument Technology Co., Ltd.

1. Infrared detector with low noise, high sensitivity and high stability. 2. The modular design of the whole machine improves the reliability of the instrument. 3. The electronic balance is automatically connected. 4, WINDOWS full Chinese operation interface, easy to operate, easy to master. 5. Dynamic display of various data and carbon in the analysis process. 6, measuring linear range is wide, and can be expanded. 7, high-frequency circuit design is reasonable, high-frequency furnace power is adjustable, suitable for different material sample analysis requirements. 8. The automatic cleaning device of the burner can reduce the influence of dust on the analysis results. 9. The burner heating device makes the conversion rate of sulfur tend to be consistent, which improves the stability of sulfur determination. 10, measuring linear range is wide, and can be expanded. 11. The software is fully functional, providing more than forty functions such as file help, system monitoring, channel selection, mathematical statistics, result correction, breakpoint correction, and system diagnosis.

Product

Standard Voltage 9 Pin D-Type Connector Blocks for Pickering Products

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connector blocks below are suitable to use with Pickering cards and modules that utilize a standard voltage 9-pin D-type connector.

Product

Vision Standard IP Cores

-

Euresys Inc.

Euresys Inc.

S2I’s Vision Standard IP Cores solutions are delivered as a working reference design along with FPGA IP cores. This minimizes development time and allows for top-notch performance at a small footprint, while leaving enough flexibility to customize the design. Sensor to Image cores are compact and leave enough space in the FPGA for your application.

Product

2-18GHz Instantaneous Frequency Measurement Unit

DR058-F2

-

Teledyne Defence & Space

DR058-F2 - Teledyne Defence & Space

Teledyne Defence & Space’s Instantaneous Frequency Measurement (IFM) module, also known as a Digital Frequency Discriminator (DFD), offers high speed frequency measurement across the full operating bandwidth.The IFM measures the frequency of RF signal present at its input and presents a result at its output as digital data. The RF input signal is conditioned by an RF amplifier that provides sufficient drive for the frequency resolving circuits. The raw video from the resolvers is digitised and processed into the required output format. There is additional timing and control circuitry which initiates the measurement process and provides handshake data to the host system processor.

Product

Open Standard Module (OSM)

ROM-2821

-

Advantech Co. Ltd.

ROM-2821 - Advantech Co. Ltd.

NXP i.MX 91 Cortex®-A55 OSM 1.1 Computer-on-Module

Product

Rack Module with Standard Contactors with Anti-Harmonic Filters

MODF Rack

-

Lifasa - International Capacitors, SA

MODF Rack - Lifasa - International Capacitors, SA

The MODF-RACK control units include, in a compact form, all the components necessary for the operation of a step of a capacitor bank with filters. MODF-RACK modules are divided into two basic blocks: power block and control block. The two blocks are mounted in a small frame to be installed in an electrical panel.

Product

Analytical Reference Materials & Standards

-

Agilent Technologies

Agilent Technologies

Agilent, now with former Ultra Scientific, offers a comprehensive portfolio of analytical standards, reference materials and certified reference materials for environmental, food safety, elemental analysis, instrument calibration, tuning mixes, and more.Reference materials and certified reference materials are substances that are tested to be homogenous and have fixed values of its concentrations. These standards are a critical component of your application workflow - from sample prep, instruments, columns, supplies, and services. The success of your analysis depends upon the quality of your reference material. All Agilent standard reference materials have been manufactured to the highest quality in an ISO 9001, ISO 17025 and 17034 accredited facilities to ensure the accuracy of your analyses.If you need a custom reference material, partner with us to design and develop a custom standard to your specifications.

Product

High Frequency Current Transformer

HFCT

-

IPEC Ltd.

HFCT - IPEC Ltd.

The HFCT is a high frequency current transformer designed specifically for picking up partial discharge signals. It has a split core ferrite to allow retrospective fitting to earth straps without the need for disconnection. The durable body has a hinge and a quick release latch, making use quick and easy. The HFCT is constructed with an aluminium body to provide RF shielding and improved performance in noisy environments.