Industrial Ethernet
ruggedized network for a plant environment.
-
Product
SQFlash 650 Series Industrial 2.5" SATA SSD
SQF-S25 650
-
SATA 3.2 Compliant, AES-256 Support & TCG-OPAL Compliant. Support HW and FW Write Protection, Supports LDPC & RAID ECC. GUI management tool & software API package, Multiple Temperature Range Product Selection. High Endurance sTLC Product Selection.
-
Product
Pressure Transmitter For Industrial Applications, Ratiometric Output
Series 21 C
-
KELLER AG für Druckmesstechnik
The C-series transmitters are noted for their ability to deliver high accuracy over a wide temperature range. This is achieved by means of mathematical modelling of the sensor characteristics and digital compensation. In order to do this, each transmitter is gauged over pressure and temperature, programmed and checked after calibration in the same test set-up.
-
Product
Industrial FIPS M.2 2280 PCIe/NVMe Gen.3 X4 SSD
SQFFCM8 920F
-
Compliant with PCIe Gen.3 x4 interface and NVMe 1.3, NGFF M.2 2280 SSD (M key) TRIM、AHCI supported, Support AES-256 and FIPS verify.
-
Product
Automotive Ethernet Tools
-
Automotive Ethernet (AE) represents the latest challenge to the status quo in automotive networking. Many OEMs are now moving forward with this exciting new technology, which promises high performance at low cost, especially for infotainment applications. Capturing Automotive Ethernet Frames. Automotive Ethernet traffic cannot be monitored using the same techniques employed for buses like CAN. Ethernet networks use star topology, so there is no single point to monitor an entire network. The sophisticated technology employed also means bit values cannot be interpreted directly from voltage levels. Finally, Ethernet hardware silently discards erroneous frames, making diagnosing problem conditions difficult. Intrepid’s tools are designed to address all of these issues conveniently and efficiently.
-
Product
Industrial IoT Edge Gateway
-
Advantech IoT Edge Gateways help bridge data from edge devices to cloud, acting as protocol converters, data collectors, or data loggers.
-
Product
16GE+4SFP Port Gigabit Unmanaged Industrial Switch
EKI-2720G
-
16 x Gigabit Ethernet ports + 4 x SFP ports, SFP socket for easy and flexible fiber expansion, NEMA TS2 for traffic control. EN50121-4 approval for railway trackside deployment, Wide operating temperature range of -40 ~ 75°C (EKI-2720G-4FI) Dual 12 ~ 48 VDC power input and 1 x relay output.
-
Product
3U CompactPCI Serial 5-slot SSR w/ RTM no Ethernet
1CPCIS-305-R010
-
3U CompactPCI Serial Backplane with 5 CPCI-S.0 slots, system slot right, with rear IO: 1x CPCI-S.0 CPU slot, 4x CPCI-S.0 peripheral slots, with connectors for RTMs in slots 2 to 5, system slot (Slot 5) has one connector for RTM -> 5RJ6 - no Ethernet.
-
Product
Industrial Multimeter
CMM-30
-
The CMM-30 model is a device from a new generation of industrial multimeters that combines versatility, modernity and extraordinary durability.
-
Product
Industrial Machine Vision and Fixed Scanners
-
Zebra Technologies Corporation
Today’s shoppers can purchase at any time from any place, creating tremendous fulfillment pressures that ripple throughout the supply chain. Zebra’s Fixed Industrial Scanning and Machine Vision solutions address it all with flawless automation that empowers you to easily set up, deploy and run the processes that drive your business. Maximize your performance, exceed your potential and delight your customers - with Zebra.
-
Product
Ethernet Tester
GAOTek Gigabit
-
GAOTek Gigabit Ethernet Tester is a handheld tester for installation, commissioning and maintenance of 10M/100M/1000M ethernet networks. By combining network performance test & monitoring, data packet sniffing, traffic generation, cable test and BER test in one unit. It is widely used in testing BER of layer 1, layer 2, layer 3, and full-featured RFC-2544 and Y.1564 testing. It can help the front-line field technicians analyze the network quality and locate the fault rapidly.
-
Product
Ethernet Multi-Function Interface
2426
-
Controls/monitors real world signals over Ethernet 24 digital I/O, 6 analog in, analog out, serial comm, incremental encoder in PWM and debounce on digital I/Os Integral support for safety interlocks Embedded HTTP and Telnet servers Open source API Low cost, low power & compact size
-
Product
EN50155 Managed Ethernet Switch
EKI-9516E-4GMW
-
12 x M12 D-Coded 10/100 Mbps ports + 4 x M12 X-Coded 10/100/1000 Mbps Byapss ports, Complies with EN50155 & EN50121-3-2, Operating temperature: -40 ~ 75°C.
-
Product
Nuclear Industry Instruments
-
The Failed Fuel needs accuracy to Identify Leaking Nuclear Fuel in both Pressurized Water Reactors and Boiling Water Reactors in Nuclear Power Plant.
-
Product
Industrial Mini-ITX Motherboard With 14/13/12th Gen Intel® Core™ I9/i7/i5/i3 Processors
AmITX-RL-I
-
- 14/13/12th Gen Intel® Core™ i9/i7/i5/i3 processors and Q670 chipset, up to 65W- Dual-channel DDR5 4800 MHz memory up to 64 GB- Quad. independent display: HDMI 2.0b, HDMI 1.4b, DP 1.4a, LVDS or eDP- Dual GbE ports: 1x 1GbE, 1x 2.5GbE- Expansion slots: 1x PCIe x16, 4x USB 3.2 Gen2, 2x USB 3.2 Gen1, 4x USB 2.0, 1x M.2 B-key, 1x M.2 E-key, 2x M.2 M-key- Support ATX (24+4 pin) or 12V DC-in power input
-
Product
Gigabit Ethernet SFP Module
SFP-GSS-40KRX-LC
-
Hardened SFP/1250-ED, SSLX-SM/LC (1550XMT/1310RCV) 40km (also known as 808-38724) Provides digital diagnostics monitoring (DDM) functionality, Wide specifications and fiber types available. Industrial standard small form-factor pluggable (SFP) package, Comes with metal enclosure for EMI.
-
Product
3U cPCI Serial 5-Port Gigabit Ethernet NIC
SN1-REVERB
-
The SN1-REVERB is a peripheral slot card for CompactPCI® Serial systems. The board is equipped with five independent PCI Express® based Gigabit Ethernet controllers, wired to associated RJ45 front panel jacks.
-
Product
Industrial Dew-Point Transmitters, Dew-Point Sensors and Trace Moisture Sampling Systems
-
Our range of dew-point sensors are easy to install and maintain.
-
Product
Industrial Communications
-
Advantech's industrial communication solutions provide reliable data communication in the most demanding C1/D2 environments.
-
Product
The Lightest Micro-ohmmeter In The Industry
RMO-H
-
The RMO-H is a portable, battery-operated micro-ohmmeter based on state-of-the-art technology, using the most advanced battery mode and switching technique available today. The high-capacity Li-Po battery allows the generation of a ripple-free DC current of up to 300 A. The test current is user-selectable and generated in an automatically regulated test ramp. During the test, the RMO-H increases the current before the measurement and decreases it afterwards. This significantly reduces magnetic transients.
-
Product
Industrial GSM MODEM
QSM-26
-
Infinite Industrial Informatics Lt
QSM-26 is a DIN rail mount GSM/GPRS MODEM. The unit has a built in Quad Band (850/900/1800/1900MHz) Sierra Wireless Q2687 modem, 2 digital inputs, 2 power relay outputs and a serial RS-232 port. Special AT commands are implemented for TCP/IP based communications.
-
Product
Industrial CT X-Ray Inspection System
X7000
-
The X7000 is North Star Imaging’s largest standard system. The large scanning envelope and generous focal distance allow for unparalleled inspection capabilities of very large objects. The system is great for composites, castings, pipes, tubes, welds and similar parts.
-
Product
3U CompactPCI Serial 3-slot SSL w/ RTM w/ Ethernet
1CPCIS-303-L210
-
3U CompactPCI Serial Backplane with 3 CompactPCI S.0 slots, system slot left, with rear IO : 1x CompactPCI S.0 CPU slot, 2x CompactPCI S.0 peripheral slots, with connectors for RTMs (RearTransition Modules) in slots 2 to 3, Ethernet full mesh.
-
Product
MTF Measuring Systems For Industrial Applications
-
The MTF (modulation transfer function) is a recognized quality criterion for the imaging quality of optics. OEG GmbH develops and manufactures computer-controlled, fully automatic measuring systems for MTF and other parameters for quality assurance in optics production, incoming goods inspection, research and teaching
-
Product
15" XGA Industrial Monitor For Hazardous Location, With "316L Stainless Steel Front Panel"
FPM-8151H
-
15" XGA TFT LCD with "LED backlight"Stainless steel 316L front panelIP65 compliant front panel-20 ~ 60°C (-4 ~ 140°F) wide operating temperature rangeEnhanced 5-wire resistive touch panelDirect VGA & DVI-D video input interfaceCombo RS-232 & USB interface for touchscreen functionSupports 24 VDC input and 100~240 VAC input (optional AC adapter)OSD control pad with lockable function on front panelCertified with UL CID2 for hazardous environment
-
Product
EN50155 Managed PoE Ethernet Switch
EKI-9528E-8GMPX
-
M12 connector with ruggedized IP54 certified housing, Complies with EN50155 and EN50121-3-2 standards, 24 x PoE IEEE802.3af/at ports, Wide nominal power input range: 24 ~ 110VDC. Operating power input range: 16.8 ~ 137.5VDC, X-Ring Pro delivers rapid and predictable convergence.
-
Product
IC-3120, 1.91 GHz Intel Atom Quad-Core Processor, 2-GigE Port Industrial Controller
784959-01
-
The IC‑3120 is a compact and rugged industrial controller that withstands the harsh environments common in automation, supervisory control, distributed control, and industrial embedded OEM applications. The IC‑3120 offers two Gigabit Ethernet ports with Power over Ethernet (PoE) technology, FPGA-based I/O capabilities, and network connectivity for distributed control applications. The advanced features include the ability to synchronize image inspection results with industrial I/O and configure hardware-timed network triggers to trigger camera acquisition, motion control, or data acquisition. You can use the advanced FPGA personality that is shipped with the system or customize the FPGA functionality using the LabVIEW FPGA Module.
-
Product
4FE+1FE SC Single-Mode Unmanaged Ethernet Switch
EKI-2525S
-
Provides 4 x 10/100 Mbps Ethernet ports with RJ45 connector, Provides 1 x 100 Mbps Multi-mode SC type fiber optic port (EKI-2525M) Provides 1 x 100 Mbps Single-mode SC type fiber optic port (EKI-2525S) Supports full/half duplex flow control.
-
Product
100% Flat Fronted Touch 15.6" Industrial Grade Monitor
IDP31-156W
-
100% flat fronted touch 15.6" industrial grade monitor. Ultra thin profile, light smooth rounded coners and rugged glass fronted for a totally contemporary outlook.
-
Product
PXIe 10GBase-T1 Ethernet MEMS Fault Insertion Switch, 8 Channel
42-205-008
-
42-205-008 (PXIe) is a 8-channel fault insertion switches designed to simulate common faults on high speed two wire communication interfaces such as xBaseT1 Ethernet. They available with 4 or 8 channels of two wire serial connections and can be used for simulating faults on 10BaseT1, 100BaseT1, 1000BaseT1 and 10GBaseT1 Ethernet interfaces. Any wire can be set as open circuit and shorts can be applied across wire pairs. Fault connections can be made to one of four external signals via two fault buses, typically simulating connections to supply voltage or ground.
-
Product
Industrial Motherboards & SBCs
-
ADLINK’s full range of industrial computers for automation, including off-the-shelf frame grabbers, motion controllers, and data acquisition cards integrated with industrial computers provide the assurance of strict verification testing, presenting an optimum solution for combined motion & vision applications.
