Industrial Ethernet
ruggedized network for a plant environment.
-
Product
Industrial Automation PC With Intel® Atom™ E3845/Celeron® J1900
UNO-2473G
-
4th Generation Intel® Atom/Celeron J1900 Processor up to 1.91/2.0 GHz with 4GB DDR3L Memory4/2 x GbE, 3 x USB 2.0 and 1 x USB 3.0/4 x USB 2.0 and 1 x USB 3.0, 2 x RS-232, 2 x RS-422/485 (E3AE), 2 x RS-232/422/485 (J3AE), 1 x VGA, 1 x HDMI, AudioCompact with Fanless DesignRubber Stopper Design with Captive ScrewDiverse system IO and Isolated Digital IO by iDoor TechnologySupports MRAM by iDoor TechnologyChassis Grounding ProtectionLAN Redundancy (Teaming)Fault-Protected RS-485 Transceivers With Extended Common-Mode Range
-
Product
Ethernet Digital Interfaces
-
All of ICS's Ethernet Digital Interfaces are user configurable and let you transfer data as bits, bytes, as strings of bytes or transparently. All data lines are high power TTL outputs or floating inputs with pullup resistors for sensing CMOS signals or switch contacts. All interfaces conform to the IEEE-488.2 Standard, are VXI-11 compatible and/or support TCPIP Raw Socket protocol.
-
Product
FMC for Data Communication Dual 1 Gigabit Ethernet FMC
FMC431
-
Sundance Multiprocessor Technology Ltd.
The FMC431 is a dual 1 Gigabit Ethernet FPGA Mezzanine Card with two RJ45 connectors available on the front panel. Compliant with the VITA 57.1 standard the FMC431 offers a High Pin Count connector but is compatible with FPGA carrier cards with Low Pin Count connectors. The Ethernet interface (1000BASE-T) is either implemented using RGMII (Low Pin Count compatible) or SGMII (High Pin Count compatible). The FMC431 also offers the option to stack an additional FMC over it. Any of the 4DSP FMC that use LVDS and single ended signaling only can be mounted over the FMC431, thus offering users with the ability to build a complete data acquisition, waveform generation and communication solution while using a single FMC site on an FPGA carrier card. The FMC431 is an ideal solution to bring Ethernet connectivity to an FPGA based system and ensure reliable external communication.
-
Product
Radar solutions for the mining industry
-
Our radar sensors will help you increase the productivity of your mining plants, reduce unplanned downtime of your mining machines and automate the work processes in Industry 4.0.
-
Product
3U CompactPCI Serial 7-slot SSR w/ RTM w/ Ethernet
1CPCIS-307-R110
-
3U CompactPCI Serial Backplane with 7 CompactPCI S.0 slots, system slot right, with rear IO: 1x CompactPCI S.0 CPU slot, 6x CompactPCI S.0 peripheral slots, with connectors for RTMs, Ethernet single star from system slot to all peripheral slots.
-
Product
Industrial AI Cameras
-
Advantech Industrial AI Cameras combine 2D/3D vision with AI for instant recognition, and decision-making in manufacturing, robotics, and smart city.
-
Product
Ethernet, GPIB And USB To Serial Interface Board
-
ICS's Model 9006 is a multi-interface to serial board that adds Ethernet, GPIB and USB interfaces to serial devices or older instruments. Use with an embedded processor board to create smart instruments with multiple interfaces. The 9006's Ethernet port is VXI-11 compatible for easy control by the following computer systems without special drivers: LINUX, UNIX, SunOS, MAC OS X, HP-UX, IBM-AIX and Windows 2K or later Windows systems. VXI-11 is one of the 9006's Ethernet protocols. ICS Electronics is the premier VXI-11 device supplier with 100% VXI-11 compliance in every product. See our extensive Application Notes or download our VXI-11 Tutorial and the VXI-11 Specification for more information about the VXI-11 Standard.
-
Product
Industrial PCs, Fanless Embedded PCs
-
The Matrix series of fanless embedded computers enhances responsiveness and durability of edge AI and edge computing applications. Designed to perform and to last, the Matrix fanless embedded computers enable timely data-driven decision making at the edge, improving efficiency, productivity and security enhancement across industries.
-
Product
Pressure Transmitters For Industrial Applications
Series 21 Y
-
KELLER AG für Druckmesstechnik
The Y-line transmitters have an extremely small temperature error. This is achieved using an additional circuit containing a temperature sensor that subdivides the temperature range into fields that are 1,5 Kelvin (K) wide.
-
Product
16FE Managed Ethernet Switch Support PROFINET, -40~75℃
EKI-5526I-PN
-
16 ports Fast Ethernet RJ-45 (EKI-5526/I-PN)Entry-Level Managed SwitchIXM function enables fast deploymentProvides GSDML filesManagement: SNMP v1/v2c/v3, WEB, Standard MIB, Private MIBSupports Media Redundancy Protocol (Media Redundancy Client)
-
Product
EN 50155 12-Port M12 Ethernet Switches
EKI-9512 Series
-
a ruggedized networking device specifically designed for reliable data communication in harsh environments, most notably for railway rolling stock (trains, trams, metros) and onboard transportation applications.
-
Product
Ethernet, GPIB And USB To Modbus RTU Interface Board
-
ICS's Model 9009 is a multi-interface board that allows Ethernet, GPIB or USB control of Modbus RTU devices. The Ethernet port has VXI-11 protocol for easy control by the following computer systems without special drivers: LINUX, UNIX, SunOS, MAC OS X, HP-UX, IBM-AIX and Windows 2K or later Windows systems. VXI-11 is one of the 9009's Ethernet protocols. ICS Electronics is the premier VXI-11 device supplier with 100% VXI-11 compliance in every product. See our extensive Application Notes or download our VXI-11Tutorial and the VXI-11 Specification for more information about the VXI-11 Standard.
-
Product
915 MHz Industrial Microwave Generators
-
Alter® GS Series industrial microwave generators provide 15kW to 75kW power at 915 MHz in a shielded cabinet with continuous powerline control, safety interlocks, a variety of interface options and optional remote control. The GS series design include Alter®'s proven switch mode power supply systems with continuous power control for rugged, light weight and modular microwave generator systems. This solution allows for power upgrades for industrial installation needs, offering maximum flexibility in system design.
-
Product
Industrial Automation
-
We have a considerable footprint into industrial applications and automation due to the wide variety of linear and rotary solutions from 1 – 2000 Watts of output performance. Large bearings, special lubrication, environmental sealing, corrosion resistance, and integrated drives are just some of the features we can employ to insure repeatable motion with high reliability in challenging environments.
-
Product
Robust Industrial Network Appliance With Intel® Atom® X7835RE/x7433RE Processors
FWA-1214
-
Robust Industrial Network Appliance with Intel® Atom® x7835RE/x7433RE Processors for OT Network Security for network security applications. Intel® Atom™ x7433RE / x7835RE Processors, 1 x DDR5 4800MT/s SODIMM up16 GB, 4 x 1 GbE RJ45 ports with 1 pair bypass.
-
Product
Industrial Cameras/ Image Precision
-
Camera-based inspection, identification and process control.
-
Product
4FE+1FE ST Multi-Mode Unmanaged Ethernet Switch, ATEX/C1D2, -40~75℃
EKI-5525MI-ST
-
Communicates with SCADA software via Modbus/TCPCommunicates with NMS (Networking management system) via SNMPPort-based QoS for deterministic data transmission-40~75°C operating temperature range (EKI-5525SI/SI-ST,EKI-5525MI/MI-ST only)8.4~52.8 V DC wide-range power inputEMS level 3 protection for extreme outdoor environmentsIEEE 802.3az Energy Efficient Ethernet (EEE)Supports redundant 12~48V DC power input and P-Fail relayLoop detection
-
Product
Industrial Flash & Memory Solutions DDR3 Memory
-
SQRAM offers DDR3 memory modules with Samsung or Hynix chips and DDR3L of low voltage 1.35v backward to 1.5V compatible with Intel and AMD platforms.
-
Product
8Relay(PhotoMOS)/14DI/6DO IoT Modbus/OPC UA Ethernet Remote I/O
ADAM-6360D
-
OPC UA empowers Modbus I/O users to access the industrial IoT world.OPC UA I/O links SCADA and the cloud without the need for gateways, accelerating OT and IT convergence.Hardware and software double security levels to prevent being hacked.Cost-effective: high I/O density and daisy-chaining solution saves cost.
-
Product
8AI/11DI/10DO IoT Modbus/OPC UA Ethernet Remote I/O
ADAM-6317
-
OPC UA empowers Modbus I/O users to access the industrial IoT world.OPC UA I/O links SCADA and the cloud without the need for gateways, accelerating OT and IT convergence.Hardware and software double security levels to prevent being hacked.Cost-effective: high I/O density and daisy-chaining solution saves cost.
-
Product
25Gbps Ethernet Packet Generators
-
Axtrinet (AXTRINET IS A TRADING NAME )
Full wire-speed 25Gbps/10Gbps/1Gbps ports.
-
Product
NVIDIA® Jetson™ TX2-based Industrial AI Smart Camera for the Edge
NEON-2000-JT2 Series
-
ADLINK's NEON-2000 Series of the NVIDIA® Jetson™ based industrial AI cameras, integrate the Jetson™ Xavier NX or Jetson™ TX2, image sensor, optimized OS, and Rich I/O for vision applications in a compact chassis with verified thermal performance, saving users' Total Cost Ownership on integration and trouble shooting, as well as minizing footprint and cableing required for installation.
-
Product
Ethernet to GPIB Controller
Model 8065
-
* Controls GPIB Devices anywhere there is a network or internet connection.* No special driver required which eliminates driver problems.* Controllable with Windows PC programs like C, Visual Basic, LabVIEW, VEE, etc that make VISA or SICL calls.* Controllable from MAC/UNIX/LINUX and similar computers with RPC calls.* VXI-11 compliant.* Includes ICS's VXI-11 and VISA keyboard control programs.* Works with Agilent, NI and Kikisui VISA libraries.* Internal webserver lets you change network settings from any browser.* Network connectivity eliminates GPIB Bus Extension problems.* Allows multiple users to access the GPIB instruments.* 8065 is our original Ethernet to GPIB Controller and recommended for replacement purposes with existing programs. Use the Model 9065 for new applications.
-
Product
Industrial Touch Monitor IDP31 Bezeless Series
-
IDP31 ProFlat bezeless industrial touch monitor series comes with a 100% flat front glass for easy maintenance and are equipped with a projected capacitive touch screen which supports up to 10 points.
-
Product
Industrial Display Kit IDK-2000 Series
-
The Advantech IDK-2000 series offers 8.4"~21.5" 1200-nit sunlight readable LCD panels with various touch screen options such as resistive touch and PCAP and is perfect for outdoor applications.
-
Product
Large Area Mapping Spectroscopic Ellipsometers for Flat Panel Display and Photovoltaic Industries
-
HORIBA Scientific’s large area spectroscopic ellipsometers are designed to provide thin film control solutions in flat panel display and photovoltaic manufacturing.A large mapping system allows thin film measurements at every location on the panel. Our large area spectroscopic ellipsometers are driven by our DeltaPsi2 software platform, which provides reliable recipes for routine thin film measurements. Automatic recipes fully automate measurement+modelling+mapping+results. Automatic reporting, data reprocessing, import/export package are some of the many functionalities of DeltaPsi2.
-
Product
10 Gigabit Ethernet AdvancedTCA® Fabric Interface Switch Blade
aTCA-3430
-
The aTCA-3430 is a high performance 10G Fabric switch blade for AdvancedTCAR platforms. This product is ideal for bandwidth intensive telecom applications such as wireless access controllers, DPI/security network, IPTV, IP multimedia subsystems, RNC/BSC, broadband access/bearer networks, data centers, and LTE/4G network applications. The aTCA-3430 provides 10GbE hub-to-node connectivity and integrated switch silicon that supports load balancing, priority queues, packet classification, and flow control to enable strict bandwidth management for implemented applications.
-
Product
3U CompactPCI Serial 4-slot SSL w/o RTM w/ Ethernet
1CPCIS-304-L200
-
3U CompactPCI Serial Backplane with 4 CompactPCI S.0 slots, system slot left, without rear IO : 1x CompactPCI S.0 CPU slot, 3x CompactPCI S.0 peripheral slots, without connectors for Rear Transition Modules (RTMs), Ethernet full mesh
-
Product
8GE+4G SFP L3 Managed Ethernet Switch, -40~75℃
EKI-9612G-4FI
-
DIN-Rail L3 switch 8 Gigabit ports + 4 SFP ports, L3 function :Static route , NAT, SFP socket for Easy and Flexible Fiber Expansion. Redundancy: X-Ring Pro (ultra high-speed recovery time < 20 ms), RSTP/STP (802.1w/1D) Security: 802.1x, Management: SNMP v1/v2c/v3, WEB, Telnet, Standard MIB, Private MIB.
-
Product
PXI 10GBase-T1 Ethernet MEMS Fault Insertion Switch, 8 Channel
40-205-008
-
The 40-205-008 (PXI) is a 8-channel fault insertion switches designed to simulate common faults on high speed two wire communication interfaces such as xBaseT1 Ethernet. They available with 4 or 8 channels of two wire serial connections and can be used for simulating faults on 10BaseT1, 100BaseT1, 1000BaseT1 and 10GBaseT1 Ethernet interfaces. Any wire can be set as open circuit and shorts can be applied across wire pairs. Fault connections can be made to one of four external signals via two fault buses, typically simulating connections to supply voltage or ground.
