Build Your Hydrostatic Tester

Start with the basic Model 9901 hydrostatic tester as shown to the left with the following standard equipment:
- Hydrostatic test pump, air operated.
- 1% ANSI B40.1 Grade 1A stainless steel high pressure gauge.
- ANSI B40.1 Grade B air pressure gauge.
- Micro adjust precision regulator.
- High pressure isolation shutoff valve.
- Automatic lubricator.
- Stainless steel high pressure manifold.
- 1/4" NPT accessory port.
- Bleed valve.
- Air shutoff valve.
- Factory set air pressure relief valve.
- 7/16-20 straight thread O-ring boss outlet port (MS33649-04) with -4 male adapter fitting.
- 3/4" swivel female hose inlet with strainer.
- Stainless steel base plate with rubber feet.

Product Home Contact/Sales Company Catalog Share Add To List

Hydrostatic Testers

Hydraulic Technology, Inc.

Hydraulic Technology Inc. has been manufacturing hydrostatic test equipment to the U.S. Military, aerospace and industrial sectors for over 30 years. These hydrostatic test systems are used for both high pressure proof testing and burst hydrostatic testing. By simply connecting one of our hydrostatic test systems to a shop air supply, safe high pressure testing can be accomplished with hydrostatic test output pressures available up to 15,000 psi. Among other specifications, our hydrostatic testers meet the requirements of MIL-T-25456, A-A-52687 AND PD02LEEE07. In addition to U.S. Military stock listed hydrostatic testers, we manufacture both standard and custom hose proof test stands, portable hydrostatic testers, hydrostatic test chambers and ancillary equipment to fit individual customers’ needs as required. We can typically ship standard units within 24-72 hours, sooner if required.

Product Home Contact/Sales Company Catalog Share Add To List
Hydrostatic Test Stand, Hydraulic System Components

9901HTX-100LR2-36x36x15 - Hydraulic Technology, Inc.

The 3 ft. wide x 3 ft. deep Hydrostatic Test Stand, Hydraulic System Components is utilized for pressure testing hose and tube assemblies as well as any component requiring hydrostatic testing in the integral safety test chamber.

Product Home Contact/Sales Company Catalog Share Add To List
Hydrostatic Test Pump, 6300 psi, P/N 9501C - USAF

9501C - Hydraulic Technology, Inc.

The 9501-9501C hydrostatic test pump provides a safe source of hydraulic pressure for proof testing pressure vessels, hose and tube assemblies or other components that require periodic proof pressure testing.

Product Home Contact/Sales Company Catalog Share Add To List
Hydraulic Hose Assemblies, 15,000 psi, USAF, US Army

8801B Tester - Hydraulic Technology, Inc.

This hydraulic hose tester is manufactured to, and meets all the requirements of, military specification MIL-T-25456B and federal specification A-A-52687. Enhanced safety for operating personnel is achieved by utilizing the optional 8801HT integral test chamber which was designed specifically to fit to all our 8801B and 9801B testers.

Product Home Contact/Sales Company Catalog Share Add To List
Fuel Hose Assembly Tester - Basic, USAF

9901-10FHT - Hydraulic Technology, Inc.

The basic fuel hose assembly tester is utilized by those users who do not require the complete 9201A test system which includes all test adapters and components required by U.S. Air Force PD 89MMI638. The 9901-10FHT however includes the identical test pump, manifold and controls and with larger valves, ports and fittings for increased fluid flow, is designed for the identical mission of testing fuel hose assemblies. Maximum pressure is 1000 psi allowing better control resolution at lower test pressures.

Product Home Contact/Sales Company Catalog Share Add To List
Portable Hydrostatic Hose Tester, 15000 psi; USMC

9901HT-8762 - Hydraulic Technology, Inc.

The 9901HT-8762 Hydraulic Hose Test System is utilized by the United States Marine Corp. for their portable forward base maintenance stations. The system includes it's own onboard "quiet" air compressor and a set of 37 degree flared test adapters from 3/16" through 2" as well as an onboard calibration gauge and pneumatic castors for use on rough terrain.

Product Home Contact/Sales Company Catalog Share Add To List
Hydraulic Hose Assemblies, 15,000 psi, US Army

9801B Tester - Hydraulic Technology, Inc.

The 9801B hydraulic hose tester is utilized by the U.S. Army for high pressure testing of hydraulic hose and tube assemblies as well as any component testing requiring test pressures up to 15,000 psi. Enhanced safety for operating personnel is achieved by utilizing the optional 8801HT integral test chamber which was designed specifically to fit to all our 8801B and 9801B testers.

Product Home Contact/Sales Company Catalog Share Add To List
Pump, Hydrostatic Test, 10,000 psi

9901-100L - Hydraulic Technology, Inc.

Hydrostatic test pump may be utilized as a standalone unit or combined with any of our reservoirs, safety test chambers, test fittings or other optional equipment to achieve a complete hydrostatic test system. with integral safety test chamber.

Product Home Contact/Sales Company Catalog Share Add To List
Safety Chamber, Hydrostatic Test

9901HTX-72x24x12 - Hydraulic Technology, Inc.

The 6 ft wide by 2 ft deep Hydrostatic Test Safety Chamber, when combined with one of our pump systems, provides a complete hydrostatic test system for testing hose and assemblies or other components requiring pressure testing.

Product Home Contact/Sales Company Catalog Share Add To List
Pump, Hydrostatic Test, 15,000 psi

9901-150L - Hydraulic Technology, Inc.

Hydrostatic test pump may be utilized as a standalone unit or combined with any of our reservoirs, safety test chambers, test fittings or other optional equipment to achieve a complete hydrostatic test system. with integral safety test chamber.

Product Home Contact/Sales Company Catalog Share Add To List
Safety Chamber, Hydrostatic Test

9901HTX-36x36x15 - Hydraulic Technology, Inc.

The 3 ft wide by 3 ft deep Hydrostatic Test Safety Chamber, when combined with one of our pump systems, provides a complete hydrostatic test system for testing hose and assemblies or other components requiring pressure testing.

Product Home Contact/Sales Company Catalog Share Add To List
Reservoir, Hydraulic, 5 gallon

9901-101-05 - Hydraulic Technology, Inc.

The 5 gallon stainless reservoir can be combined with one of our hydrostatic test pumps or a complete hydrostatic test system when using water, any petroleum based hydraulic fluid or synthetic hydraulic fluids such as Skydrol.

Product Home Contact/Sales Company Catalog Share Add To List
Reservoir, Hydraulic, 10 gallon

9901-101-10 - Hydraulic Technology, Inc.

The 10 gallon stainless reservoir can be combined with one of our hydrostatic test pumps or a complete hydrostatic test system when using water, any petroleum based hydraulic fluid or synthetic hydraulic fluids such as Skydrol.

Product Home Contact/Sales Company Catalog Share Add To List
Hydrostatic Test Chambers

Hydraulic Technology, Inc.

Test chambers are available to protect personnel during proof or burst testing. A few samples are pictured below. Chambers are manufactured in polished stainless steel with a clear polycarbonate door(s) for visibility during testing. Fluid port(s) are provided inside the enclosure, while all controls remain outside the enclosure for operator safety. In a hurry? Choose from our selection of Quick Ship Test Systems. basic units can ship within 24 hours or less and chamber systems within 2-3 days. we normally stock test chambers with nominal working area dimensions of either 24" wide x 24" deep x 15" high, 36" x 36" x 15", 48" x 24" x 15" or 72" x 24" x 12" with the door opening from the top. specify individual parameters at our customization page. Need a different size or configuration? No problem, simply specify dimensions and features that more accurately meet your particular requirements and we will be pleased to accommodate you. To customize a system to fit your particular application, please visit our customization page or give us a call at (916) 645-3317.

Product Home Contact/Sales Company Catalog Share Add To List
Modular Hydrostatic Test System

Hydraulic Technology, Inc.

Our modular hydrostatic test chambers are designed with open ends to accommodate the connection to similar units for the purpose of lengthening the enclosed test area. The modular test system starts with a base unit with complete pump system, gauges and controls mounted on the 60” x 24” x 18” test chamber. If longer test lengths are required, simply add another test chamber to double, triple or quadruple the test length area. Specify your particular requirements at our Customization Page.

Product Home Contact/Sales Company Catalog Share Add To List
Fuel Hose Assembly Tester - USAF

9201 - Hydraulic Technology, Inc.

The purpose of this equipment is to provide a source of high pressure fluid for proof testing of fuel hoses after assembly or on a periodic schedule as required by specification.

Product Home Contact/Sales Company Catalog Share Add To List
Hydrostatic Test Stand, Hydraulic System Components

9901HTX-100LR2-72x24x12 - Hydraulic Technology, Inc.

The 6 foot wide Hydrostatic Test Stand, Hydraulic System Components is utilized for pressure testing hose and tube assemblies as well as any component requiring hydrostatic testing in the integral safety test chamber.

Product Home Contact/Sales Company Catalog Share Add To List
Safety Test Chamber Kit for both new and existing 8801 and 9801 testers US Army, USAF

8801HT/9801HT - Hydraulic Technology, Inc.

The 8801HT retrofit safety test chamber kit is designed specifically for existing 8801-8801B and 9801B hydrostatic hose test systems in the field. It may also be ordered complete with a new 8801B or 9801B tester.

Product Home Contact/Sales Company Catalog Share Add To List