16 Channel ADC for PCI

The PCI392 16-Channel Common-Mode Input ADC for PCI is very well suited to be used in applications in which autonomous signal conversion is an issue, as well as in standard mid-range applications. Enabled channels are scanned at maximum rate and conversion results are stored in shared memory. A local DSP performs all functionality like calibration. User-specific functions can be added for customized operation.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

Topics

Family

PCI

AcQ Inducom

PCI is a local computer bus for attaching hardware devices in a computer. PCI (Peripheral Component Interconnect) is part of the PCI Local Bus standard. The PCI bus supports the functions found on a processor bus but in a standardized format that is independent of any particular processor’s native bus.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
M-Module Carrier for PCIbus

i2001 - AcQ Inducom

The i2001 M-module Carrier for PCI bus implements a PCI bus gateway to the M-module interface. One M-module mounting socket is provided by this carrier. The M-module I/O connector is accessible through the PCI card bracket. The M-module interface of the i2001 complies to the M-module Specification ANSI/VITA 12-1996. The interface features A8, A24, D16 and D32 access types.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List
ARINC-429 Controller for PCI

PCI302 - AcQ Inducom

The PCI302 provides four ARINC-429 compatible channels (2x receive and 2x transmit) at any rate between 12.5 and 100kbps.Because the PCI302 is built upon a flexible platform, the user functions can be implemented almost without restriction, making this product flexible and user-friendly.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List
Stepper Motor Controller for PCI

PCI321 - AcQ Inducom

The PCI321 Intelligent Stepper Motor Controller with amplifiers is an ideal solution for all applications where stepper motors must be controlled with a maximum of flexibility and a minimum of overhead. The local processor handles all high-level commands to provide maximum control for both straightforward as very complex applications.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List
Stepper Motor Controller for PCI

PCI322 - AcQ Inducom

The PCI322 Intelligent Stepper Motor Controller is designed to drive external amplifiers. This is an ideal solution for all applications where stepper motors must be controlled with a maximum of flexibility and a minimum of overhead. The local processor handles all high-level commands to provide maximum control for both straightforward as very complex applications

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List
CANbus Controller Standard Interface

PCI360 - AcQ Inducom

The PCI360 CANbus controller PCI card is based on the SJA1000. The SJA1000 provides an interface to the popular CANbus that support both standard (11-bit) and extended (29-bit) identifier messages. LEDs provide diagnostics information.The CAN network is a serial communication protocol which efficiency supports distributed real-time control with a high level of reliability.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
6 Channel Encoder Input Controller

PCI323 - AcQ Inducom

The PCI323 Quadrature Incremental Encoder Interface is designed to interface with up to six quadrature incremental encoders. This is an ideal solution for all applications where several encoders must be connected with a maximum of flexibility and a minimum of overhead.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List
Universal Timer/Counter for PCI

PCI385 - AcQ Inducom

The PCI385 Universal Timer Counter PCI card is an ideal solution for automated test and measurement applications. The PCI385 features two timer/counter inputs. Both inputs have a coaxial connector for the input range of +/- 10 V and high-voltage pins for the input range of +/- 300 V. The coupling of the inputs is either AC or DC. The PCI385 provides 6 measurement functions: frequency, high-time, low-time, period, counter and phase measurements.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
RTD Measurement for PCI

PCI390 - AcQ Inducom

The PCI390 features six 2-, 3-, or 4-wire high-accuracy RTD measurement channels. Each channel has programmable alarm limits on which an interrupt can be issued. The local DSP (TMS320C203) performs linearization, auto-calibration and alarm-limit checking. Sensor-data is available in °C, °F, K and Ohms. All inputs are optically isolated from the system.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
8 Channel ADC for PCI

PCI393 - AcQ Inducom

The PCI393 8-Channel Differential Input ADC for PCI is very well suited to be used in applications in which autonomous signal conversion is an issue, as well as in standard mid-range applications. Enabled channels are scanned at maximum rate and conversion results are stored in shared memory. A local DSP performs all functionality and user-specific functions can be added for customized operation.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
12-/16-bit 16 Channel DAC for PCI

PCI395 - AcQ Inducom

The PCI395 features 16 analog voltage outputs, integrated on the factory standard, ANSI certified M-module standard. Each output has a 12- or 16-bit resolution and a software programmable output range (0..+10V or -10..+10V). Control of the analog output is as easy as writing the binary equivalent to a dedicated register (per channel).

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List