Flexible Pitch GND Fixture Clamps

GF-A - High Power Pulse Instruments GmbH (HPPI)

*Compatible with GGB picoprobe model 10 replacement probe tips
*<1 ns rise time (200 ps possible with 5 mm GND wire length)
*Custom selectable GND wire length 5-15 mm
*Gold-coated spring-steel clamp with micro-machined groove for locking of the clamps on the probe tip
*High conductivity and low inductance copper HF litz wire with 200 x Ø 0.02 mm strands
*Easy to use clamping
*Tungsten carbide probe needle with 1 inch length, 15° taper and 7.5 µm tip radius

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

Probing Solutions

High Power Pulse Instruments GmbH

Probing Solutions and Probe Arms by HPPI GmbH

Product Home Contact/Sales Company Catalog Share Add To List
Automated Robot Test System

ATS-8000A - High Power Pulse Instruments GmbH

The ATS-8000A test system is a fully automated 2-pin probing solution for HBM, TLP, HMM and CC-TLP on package- and wafer-level.Future extension for CDM is optional.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List
Portable Wafer Probe Station

PS-5026B - High Power Pulse Instruments GmbH

The PS-5026B is a rugged portable wafer probing solution which has been designed for high reliability, compact size and minimum cost.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List
Precision Picoprobe™ Micropositioner Probe Holder Kit

PHD-3001A - High Power Pulse Instruments GmbH

*Pulse force and pulse sense fixed pitch and flexible pitch RF probing solution for TLP/VF-TLP/HMM on-wafer measurements using Picoprobe™ Model 10*High peak current capability 80 A (100 ns)*DC – typ. 7 GHz bandwidth*Isolated probe-head ground shield for high pulse sense common mode signal rejection*Including fixed pitch replacement probe tip 50 Ω, right, 100 µm pad pitch*Including fixed pitch replacement probe tip 5 kΩ, left, 100 µm pad pitch*Including flexible pitch clamps plus 10-5k(0502)-125-W-1 and 10-50/30-125-W-1 replacement probe tips*True coaxial high-resolution 80:1 rotary probe-head for accurate probe tip adjustment

Product Home Contact/Sales Datasheet Company Catalog Share Add To List
Compact TLP/VF-TLP/HMM Probearm Set for Temperature Measurements

PHD-4001A - High Power Pulse Instruments GmbH

*Electrically isolated probearm kit for VF-TLP, TLP, HMM, HBM force and sense probingbased on the GGB Picoprobe Model 10 replacement probe tips*Buried coaxial cable channel for thermo-chuck in isolated chamber temperature measurements*Compatible with GGB Picoprobe Model 10 replacement probetips*Compatible with all standard micropositioner interfaces*High precision rotation of the probearm by backlash-free 80:1 gear*Rugged stainless steel design*SMA connectors

Product Home Contact/Sales Datasheet Company Catalog Share Add To List
Sealing Kit for PHD-4001A on Cascade Elite E300, Octagon CM300 Probe Station

PHD-4001-TH-Seal - High Power Pulse Instruments GmbH

*Sealing Kit for PHD-PPM10-H9 and PHD-4001A on Cascade Octagon CM300 probe station*High temperature range -40 °C to +200 °C

Product Home Contact/Sales Datasheet Company Catalog Share Add To List
48 Ω HMM Pulse Force Probe

PHD-HMM-48-1 - High Power Pulse Instruments GmbH

*High current wafer-level and package-level 98 Ω HMM probing with grounded DUT*Built-in high surge 48 Ω pulse reflection suppression resistor up to 80 A peak*Fast rise time < 0.5 ns due to low inductance GND loop*Variable pitch from 50 µm to 5 mm*Tungsten replacement probe tips*SMA pulse force pigtail*Compatible to PHD-3001A interface*High reliability

Product Home Contact/Sales Datasheet Company Catalog Share Add To List
TLP Probe Arm Kit

TPA-95 - High Power Pulse Instruments GmbH

*Flexible pulse force, pulse sense combined TLP probe arm kit based on TPA-95L and TPA-95R*Compatible with typical standard micropositioner mechanical interfaces*4.7 kΩ pulse sense voltage divider, which results in a voltage transfer ratio of (4700 + 50)/50 = 95 : 1 into 50 Ω*Variable probe pitch configuration*1 m flexible 50 Ω cables with SMA connector for pulse sense*0.1 m flexible 50 Ω cables with SMA connector for pulse force*Tungsten probe tips*Can be used for chuck backside grounded TLP measurements

Product Home Contact/Sales Datasheet Company Catalog Share Add To List
Manual Probearm for HBM and Flex-Pitch Applications

TPA-GFM - High Power Pulse Instruments GmbH

*Electrically isolated probearm for GND needle contact or general purpose DC, twin-wire HBM or flexible pitch VF-TLP/TLP/HMM/HBM force/sense probing based on the HPPI GF-A flexible pitch setup.*Suitable to mount the GF-A ground fixture needle for flexible pitch measurements. In addition a cable (e.g. for HBM) can be directly connected to the contact pin.*High stability

Product Home Contact/Sales Datasheet Company Catalog Share Add To List
Flexible Probearm for HBM and Flex-Pitch Applications

TPA-GFG - High Power Pulse Instruments GmbH

*Electrically isolated probearm for GND needle contact or general purpose DC, twin-wire HBM or flexible pitch VF-TLP/TLP/HMM/HBM force/sense probing based on the HPPI GF-A flexible pitch setup.*Flexible rotation of the probearm by precision gear 80:1*Suitable to mount the GF-A ground fixture needle for flexible pitch measurements. In addition a cable (e.g. for HBM) can be directly connected to the contact pin.*High stability

Product Home Contact/Sales Datasheet Company Catalog Share Add To List
CC-TLP Probe

CC-TLP-50-A1 - High Power Pulse Instruments GmbH

*Capacitively coupled TLP probearm (CC-TLP) compatible with standard probing stations*18 GHz SMA connector*Tilt angle adjustment*Calibration gauge for needle height

Product Home Contact/Sales Datasheet Company Catalog Share Add To List