Taylor Dynamometer, Inc.

Product

Engine Dynamometer

DX34-HS

-

Taylor Dynamometer, Inc.

DX34-HS - Taylor Dynamometer, Inc.

Power: 1,000 hp (746 kW)Torque: 3,217 lb-ft (4,361 Nm)Speed: 6,000 rpmWater Use*: 73 gpm (276.3 lpm)Inertia Value**: 82 lb·ft2 (3.5 kg·m2)Shipping Weight: 1,846 lb (837 kg)Rotation: bi-directional

Product

Engine Dynamometer

H3602

-

Taylor Dynamometer, Inc.

H3602 - Taylor Dynamometer, Inc.

Power: 1,600 hp (1,193 kW)Torque: 9,337 lb-ft (12,664 Nm)Speed: 2,500 rpmInertia Value**: 411 lb-ft2 (17.32 kg-m2)Shipping Weight: 8,750 lb (3,969 kg)

Product

Towing Dynamometer

RS-200K

-

Taylor Dynamometer, Inc.

RS-200K - Taylor Dynamometer, Inc.

RS-200K towing dynamometer is designed for testing Class A trucks and is the most full-featured, reliable and accurate towing dynamometer in the industry. The RS-200K is built with a heavy-duty steel frame, heavy-duty industrial axles and rides on an air ride suspension. The RS-200K is designed to maintain 200,000 Newtons of constant drawbar pull and the ability to simulate an uphill slope of 25%. The towing dyno uses absorbers with special high temperature coils powered by an industrial generator so there are nolead-acid batteries to charge and testing is unlimited at low speeds.

Product

1100 HP Water Brake Chassis Dynamometer

CM-51

-

Taylor Dynamometer, Inc.

CM-51 - Taylor Dynamometer, Inc.

AC power, air and water required at one side wallas applicable.• Room length, and pit location within length,must be determined by user to fit maximumtruck length and rear overhang.• Provide at least one man door for fire escapenear rear of room, but not in rear wall becausesomeone entering during a test could be struckby a stone flung from a tire. Provide ample fireextinguishers at each door and near driver.• “Back-on, Drive-off” installation configurationpreferred.

Product

1650 HP Water Brake Chassis Dynamometer

TD-24X3

-

Taylor Dynamometer, Inc.

TD-24X3 - Taylor Dynamometer, Inc.

Weight Capacity: 30,000 lb (13,608 kg) per axleRoll Brakes: Pneumatically-actuated discShipping Weight: 22,000 lb (9,979 kg)Capacity: 1,650 hp at 35 mph (1,230 kW at 56 kph)Rolls: 24 by 34 in. (610 by 864 mm) 4 front fixed rolls, 2 sets of 2 rear rolls to accommodate axle spreads from 48 to 66 in. (1,219 to 1,676 mm) tandem centers and 52 to 62 in. (1,321 to 1,575 mm) tridem centersPit Required Depth: 27 in. (686 mm)

Product

Water Brake Dynamometers

CM Series

-

Taylor Dynamometer, Inc.

CM Series - Taylor Dynamometer, Inc.

CM Series Water Brake Dynos from Taylor Dynamometer offer for low upfront cost, low maintenance, low inertia and high durability. Choose from cradle-style dynos for single- or tandem-axle vehicles, with continuous capacity up to 1,100 hp (820 kW).

Product

Engine Dynamometer

DE30

-

Taylor Dynamometer, Inc.

DE30 - Taylor Dynamometer, Inc.

Power: 40 hp (30 kW)Torque: 70 lb-ft (95 Nm)Speed: 14,000 rpmWater Use*: 10 gpm (37.9 lpm)Inertia Value: 0.40 lb·ft2 (0.0168 kg·m2)Shipping Weight: 1,213 lb (550 kg)Rotation: bi-directional*No Cooling System

Product

Eddy Current Engine Dynamometers

-

Taylor Dynamometer, Inc.

Taylor Dynamometer, Inc.

A precise, low-maintenance, rapid response and repeatable alternative to water brake technology, Taylor’s Eddy Current Engine Dynos provide low-inertia, air- or water-cooled operation for testing engines up to 966 hp (720 kW) in a range of markets.

Product

AC Engine Dynamometer

DA16

-

Taylor Dynamometer, Inc.

DA16 - Taylor Dynamometer, Inc.

Power: 16 hp (11.9 kW)Torque: 42 lb-ft (56.9 Nm)Maximum Speed: 6,400 rpmConstant Torque Range: 0 - 2,000 rpmConstant Power Range: 2,000 - 3,200 rpmDecreasing Power Range: 3,200 - 6,400 rpmRotation: bi-directional

Product

Towing Dynamometer

RSL-15K

-

Taylor Dynamometer, Inc.

RSL-15K - Taylor Dynamometer, Inc.

RSL-15K Towing Dynamometer is designed for testing today’s full-sized cars, to mid and full-sized SUVs. The unique design of the RSL-15K allows it to be used for a wide range of vehicle weights. Built with an all-aluminum frame, sheet metal body and rides on an independent, coil spring suspension. The RSL-15K uses two eddy current absorbers for power absorption. The power is provided by batteries and an alternator.

Product

Engine Dynamometer

H3610M

-

Taylor Dynamometer, Inc.

H3610M - Taylor Dynamometer, Inc.

Power: 10,000 hp (7,457 kW)Torque: 50,000 lb-ft (67,820 Nm)Speed: 2,500 rpmInertia Value**: 1,963 lb-ft2 (82.72 kg-m2)Shipping Weight: 15,750 lb (7,144 kg)

Product

Portable Engine Dynamometers

-

Taylor Dynamometer, Inc.

Taylor Dynamometer, Inc.

Cost-effective Portable Engine Dynos from Taylor Dynamometer are water brake style systems for diesel applications up to 1,250 hp (932 kW) and 3,000 ft-lb (4,068 N) of torque. Mount yours right on the engine in minutes for fast, convenient and reliable testing.

Product

Engine Dynamometer

DX38

-

Taylor Dynamometer, Inc.

DX38 - Taylor Dynamometer, Inc.

Power: 2,000 hp (1,491 kW)Torque: 6,434 lb-ft (8,723 Nm)Speed: 4,000 rpmWater Use*: 145 gpm (548.9 lpm)Inertia Value**: 160.7 lb·ft2 (6.8 kg·m2)Shipping Weight: 2,634 lb (1,195 kg)Rotation: bi-directional

Product

Versatile, Heavy-duty Hydraulic Test Centers

HTC Series

-

Taylor Dynamometer, Inc.

HTC Series - Taylor Dynamometer, Inc.

For powertrain testing it’s all about fast and exceptional results achieved in the safest manner possible. Our Hydraulic test stands HTCs offer full functionality to test all types of transmissions, motors, cylinders, valve blocks, torque converters and pumps. As you evaluate your needs for heavy-duty mobile testing equipment, consider how upgrading to the latest technology can improve your bottom line.

Product

AC Engine Dynamometer

DA351

-

Taylor Dynamometer, Inc.

DA351 - Taylor Dynamometer, Inc.

Power: 351 hp (261.7 kW)Torque: 921 lb-ft (1,248.7 Nm)Maximum Speed: 5,600 rpmConstant Torque Range: 0 - 2,000 rpmConstant Power Range: 2,000 - 3,600 rpmDecreasing Power Range: 3,600 - 5,600 rpmRotation: bi-directional