Taylor Dynamometer, Inc.

Product

Chassis Dynamometers

-

Taylor Dynamometer, Inc.

Taylor Dynamometer, Inc.

With Chassis Dynamometers, it’s all about getting the best value – proven performance, durability and expert support long after your purchase. Taylor’s comprehensive line of chassis dynamometers supports testings for: performance, diagnostics, break-in, research and development, education and training.

Product

Towing Dynamometer

RSL-25K

-

Taylor Dynamometer, Inc.

RSL-25K - Taylor Dynamometer, Inc.

RSL-25K Towing Dynamometer is designed for testing today’s full-sized cars, SUVs and light trucks. The RSL25K is built with a steel frame, sheet metal body and rides on an independent, coil spring suspension. The RSL-25K uses eddy current absorbers for power absorption. The power is provided by batteries and an alternator.

Product

Water Brake Engine Dynamometers

H36 Series

-

Taylor Dynamometer, Inc.

H36 Series - Taylor Dynamometer, Inc.

Low rpm. High torque. Ultra-low inertia. And yet, it comes in a compact package that uses as little of your valuable floor space as possible.

Product

Water Brake Chassis Dynamometers

-

Taylor Dynamometer, Inc.

Taylor Dynamometer, Inc.

Chassis water brake dynos (also known as hydraulic dynamometers) can be operated continuously to resolve overheating, fuel mileage and drivetrain issues. Taylor’s eight models accommodating 50 to 1,100 hp at 40 mph enable testing of single-axle diesel pickup trucks, RVs and buses up through the largest tandem-axle on-highway trucks and buses. Tap into our deep product and applications knowledge to help you choose and make the most of the right water brake system for current and future needs.

Product

1650 HP Water Brake Chassis Dynamometer

TD-24X3

-

Taylor Dynamometer, Inc.

TD-24X3 - Taylor Dynamometer, Inc.

Weight Capacity: 30,000 lb (13,608 kg) per axleRoll Brakes: Pneumatically-actuated discShipping Weight: 22,000 lb (9,979 kg)Capacity: 1,650 hp at 35 mph (1,230 kW at 56 kph)Rolls: 24 by 34 in. (610 by 864 mm) 4 front fixed rolls, 2 sets of 2 rear rolls to accommodate axle spreads from 48 to 66 in. (1,219 to 1,676 mm) tandem centers and 52 to 62 in. (1,321 to 1,575 mm) tridem centersPit Required Depth: 27 in. (686 mm)

Product

1100 HP Water Brake Chassis Dynamometer

CM-51

-

Taylor Dynamometer, Inc.

CM-51 - Taylor Dynamometer, Inc.

AC power, air and water required at one side wallas applicable.• Room length, and pit location within length,must be determined by user to fit maximumtruck length and rear overhang.• Provide at least one man door for fire escapenear rear of room, but not in rear wall becausesomeone entering during a test could be struckby a stone flung from a tire. Provide ample fireextinguishers at each door and near driver.• “Back-on, Drive-off” installation configurationpreferred.

Product

Engine Dynamometer

DH22

-

Taylor Dynamometer, Inc.

DH22 - Taylor Dynamometer, Inc.

Power: 530 hp (410 kW)Torque: 850 lb-ft (1,153 Nm)Speed: 5,500 rpmWater Use*: 40 gpm (151.4 lpm)Inertia Value: 7.4 lb·ft2 (0.312 kg·m2)Shipping Weight: 400 lb (181 kg)*No Cooling System

Product

AC Engine Dynamometer

DA351

-

Taylor Dynamometer, Inc.

DA351 - Taylor Dynamometer, Inc.

Power: 351 hp (261.7 kW)Torque: 921 lb-ft (1,248.7 Nm)Maximum Speed: 5,600 rpmConstant Torque Range: 0 - 2,000 rpmConstant Power Range: 2,000 - 3,600 rpmDecreasing Power Range: 3,600 - 5,600 rpmRotation: bi-directional

Product

Engine Dynamometer

H3610

-

Taylor Dynamometer, Inc.

H3610 - Taylor Dynamometer, Inc.

Power: 8,000 hp (5,966 kW)Torque: 46,684 lb-ft (63,322 Nm)Speed: 2,500 rpmInertia Value**: 1,963 lb-ft2 (82.72 kg-m2)Shipping Weight: 15,750 lb (7,144 kg)

Product

Towing Dynamometer

RS-40K

-

Taylor Dynamometer, Inc.

RS-40K - Taylor Dynamometer, Inc.

RS-40K towing dynamometer is designed for testing today’s DOT Vehicles (Classes 5 and 6) which include trucks and buses. The RS-40K is built with a heavy-duty steel frame, industrial axle and rides on an air ride suspension. The RS-40K is designed to maintain 40,000 Newtons of constant drawbar force and the ability to simulate an uphill slope of 25%. The dyno uses eddy current absorbers with special high temperature coils. The power is provided by an industrial generator. Testing is unlimited at lowspeeds.

Product

Engine Dynamometer

DX32-HS

-

Taylor Dynamometer, Inc.

DX32-HS - Taylor Dynamometer, Inc.

Power: 500 hp (373 kW)Torque: 1,608 lb-ft (2,181 Nm)Speed: 6,000 rpmWater Use*: 37 gpm (140 lpm)Inertia Value**: 42.9 lb·ft2 (1.8 kg·m2)Shipping Weight: 1,451 lb (658 kg)Rotation: bi-directional

Product

Engine Dynamometer

DX35

-

Taylor Dynamometer, Inc.

DX35 - Taylor Dynamometer, Inc.

Power: 1,250 hp (932 kW)Torque: 4,021 lb-ft (5,452 Nm)Speed: 4,000 rpmWater Use*: 91 gpm (344.5 lpm)Inertia Value**: 101.6 lb·ft2 (4.3 kg·m2)Shipping Weight: 2,043 lb (927 kg)Rotation: bi-directional

Product

550 HP Water Brake Chassis Dynamometer

TD-36S

-

Taylor Dynamometer, Inc.

TD-36S - Taylor Dynamometer, Inc.

Weight Capacity: 30,000 lb (13,608 kg) per axleRoll Brakes: Pneumatically-actuated discShipping Weight: 6,600 lb (2,994 kg)Capacity: 550 hp at 45 mph (410 kW at 72 kph)Rolls: 36 by 31 in. (914 by 787 mm)Pit Required Depth: 35 in. (889 mm)

Product

1100 HP Water Brake Chassis Dynamometer

TD-24

-

Taylor Dynamometer, Inc.

TD-24 - Taylor Dynamometer, Inc.

AC power, air and water required at one side wallas applicable.• Room length, and pit location within length,must be determined by user to fit maximumtruck length and rear overhang.• Provide at least one man door for fire escapenear rear of room, but not in rear wall becausesomeone entering during a test could be struckby a stone flung from a tire. Provide ample fireextinguishers at each door and near driver.• “Back-on, Drive-off” installation configurationpreferred

Product

Instrumentation System For Towing Dynamometers

DynCtrl-II

-

Taylor Dynamometer, Inc.

DynCtrl-II - Taylor Dynamometer, Inc.

Taylor Dynamometer’s DynCntrl-II instrumentation system for towing dynamometers includes a ruggedized, Wi-Fi, touchscreen tablet PC with an integrated graphic heads-up display and a robust instrumentation package mounted in a sealed Nema enclosure. Our easy to use, intuitive, DynCntrl-II software not only makes testing simple, but also displays and records multiple channels of real time data.