PC/104 Interface

DDC's BU-6558XCX Series of PC/104 cards provide a complete COTS solution for interfacing between an embedded PC/104 bus and one to four Enhanced Bit Rate - 1553 Channel(s) with supporting CANBus interface(s), while also providing an optional MIL-STD-1553 dual redundant interface.  ...more

The EXC-4000P104plus is a multiprotocol PC/104-Plus interface board. Each board holds up to five independent modules. Two M4K1553MA modules based on the 1553 DDC MicroAce chip can be integrated directly on the board. ...more

Each I/O line of this card is buffered and capable of sourcing 32mA, or sinking 64mA. The board simulates Programmable Peripheral Interface chips (PPI) to provide a computer interface to digital I/O lines. Each PPI supports two 8-bit ports (A, B) and two 4-bit ports (Chi, Clow).  ...more

Single Channel Opto-Isolated CAN interface module supporting the Philips SJA1000 Controller (CAN 2.0B compliant) ...more

Choose from the best offering of PC/104 CPU Modules - benefit from the market leader. MOPS PC/104 modules are a family that allow full accessory Re-Use - as most interfaces remain unchanged electronically and mechanically. Easiest up/downgrade at minimum risc - from 386 to Pentium M and back again. ...more

The PC104/T2/R2 ARINC 429 Interface card is configured as a 16 bit Stack-through PC/104 interface card and comprises of two independent transmitter channels that act as Bus Traffic Simulators and two independent receiver channels that provide advanced Real Time Monitor and Data Acquisition functions. ...more

Silicon Control introduces the ultimate analyzer and exerciser for PC/104 and PC/104+ systems. This 3rd generation PC/104 analyzer combines high performance hardware with a sophisticated and intuitive software interface. The result is a powerful diagnostic tool for bus analysis all on a single plug-in card. ...more

Whether your requirement is one and two extra RS-232 serial ports or a multi interface RS-232/422/485 eight port board, Kontron has the PC/104 communication board for you. Also, your rugged ethernet LAN or hub needs can be met for you PC/104 embedded applications. ...more

The COM-1240 is an MVB interface board compliant with the 2002/95/CE (RoHS) directive and specifically developed to be used as a gateway between a PC/104 system and the MVB bus (Multifunctional Vehicle Bus, common to railway applications). ...more

PC/104 processors and interfaces small form factor boards fit for minimal or moderate processing power needs, with STPC, Geode GX1 and 386-SX-40 CPUs. ...more

GPIB Interface for PC/104 Systems ...more

The CTR-1462 is a fully RoHS compliant single slot PCMCIA/CARDBUS interface board. It has been developed to enable designers to incorporate type I, II or III cards. The low power board has combined support for both legacy 16-bit (PCMCIA) and 32-bit (CARDBUS) modules. Configuration options are maximized by the support of parallel use of ISA and ...more

chipDISK, IDE compatible 32, 128, 256 or 512 MByte flash harddisk, plugs on standard 44pin IDE interface - so for most standard SBCs useable, firm lockable on MOPS. ...more

The PC104/PANAVIA/T2/R2 PANAVIA serial interface card is configured as a 16 bit Stack-through PC/104 interface card. It comprises of two independent transmitter channels that act as Bus Traffic Simulators and two independent receiver channels that provide advanced Real Time Monitor and Data Acquisition functions. ...more

PC/104 module with 4 Channel RS-232 and opto-isolated RS-422/RS-485 asynchronous (16C550) serial communications interface ...more

PC/104 processors and interfaces small form factor boards fit for minimal or moderate processing power needs, with STPC, Geode GX1 and 386-SX-40 CPUs. ...more

The Condor Engineering MS1553PC104 board offers powerful and economical solutions for interfacing to MIL-STD-1553B avionics data buses from the PC/104 bus. ...more

Available in a range of configurations to match your embedded system needs, the CEI-430 provides complete, integrated databus functionality for up to 24 channels of ARINC 429 or 575 along with ARINC 717, 573 and other selected 2-wire, 32-bit protocols, on a PC/104-Plus or PCI-104 platform. ...more

Condor?s Q104-1553 and Q104-1553-P boards provide new levels of performance and flexibility for MIL-STD-1553A/B Notice II in the PC/104 (ISA backplane) and PC/104-Plus (PCI backplane) form factors ...more

3.5" embedded system board, based on low power NS GX1 processor with VGA/LAN/Ethernet/CF ...more

BittWares Hammerhead-PC/104-Plus (HHP4) board packs the lightning-fast processing power of two ADSP-21160 SHARC DSPs and the speed of a 32-bit, 33 MHz PCI interface onto a PC/104-Plus format card. Up to 64-256 MB SDRAM is available to both processors for general-purpose code and data storage, and 2 MB of FLASH memory is available on an 8-bit p ...more

If you want to use IndustryPack modules with your PC/104+ or PC/104-Plus system, the PC104p4IP is the choice for you. The PC104p4IP combines features you need with simplicity and speed. Up to 4 IP modules can be installed. Standard 16 bit IPs plus 32 bit, and double wide modules fit right in. Each slot has independent operation - control, cloc ...more

Fully compatible with Cisco Systems 3200 Series Mobile Access Routers, the DATEL MAPC-104 Mobile Access Power Card is a triple-output DC/DC converter in a PC/104-Plus format. The MAPC-104 accepts 12Vdc or 24Vdc inputs from a vehicular battery system and provides the fully protected 3.3V, 5.1V and 12V outputs needed to drive any standard configurati ...more

The PC104P-1553 represents the latest 1553 design in the industry. The product is an advanced 32-bit design with the most advanced features - and designed for a long, reliable life. Ideal for test or rugged embedded applications, the PC104P-1553 is based on AltaCore running on today's most common and advanced FPGAs and fast QDR RAM.  ...more