Linear Control

Identify sticking valves, sensor flat spots, and no code intermittents on ALL GM Linear and Digital EGR Systems. There's No faster way to pinpoint intermittent feedback sensors and EGR valves, NOx failures or engine performance problems. The model 47062 Checks vacuum control solenoids, vacuum lines and EGR passages. ...more

The Series 642 Pressure Transmitter uses high end ASIC technology to compensate for both linearity and thermal errors, providing an output with an accuracy of 0.1% of F.S. The 642 is therefore well suited for applications where precision measurement and control is an absolute must ...more

The AV108-59 GaAs IC FET voltage variable attenuator provides 35 dB attenuation range at 900 MHz controlled by a single positive voltage.The VVA has a linear transfer curve of 12 dB/V slope, with input and output VSWR better than 2:1 over all states. Its attenuation range at 1900 MHz is 25 dB. It operates with supply voltage of +3 V and contro ...more

The AS217-000 is a PHEMT GaAs FET IC high linearity SPDT switch. This switch has been designed for use where extremely high linearity, low control voltage, high RX isolation and low Tx insertion loss. It can be controlled with positive, negative or a combination of both voltages. Some standard implementations include antenna changeover, T/R an ...more

The SKY77500 Tx/Rx FEM is a complete transmit VCO-to-Antenna and Antenna-to-receive SAW filter solution for quad-band cellular handsets comprising GSM850/900, DCS1800, and PCS1900. Also supporting Class 12 GPRS multi-slot operation, the module consists of GSM and DCS/PCS PA blocks, impedance-matched input/output for 50 ohms, TX harmonics filte ...more

The Crossbow IMU400CD is a high per formance solid-state six degree-of-freedom (6DOF) Inertial Package intended for OEM navigation and control, dynamics testing and instrumentation applications. This high reliability strap-down inertial system provides accurate measurement of angular rate and linear acceleration. ...more

The AW002R2-12 is a high power IC FET SPDT switch in a plastic SOIC-8 package. This switch has been designed for use where extremely high linearity is required. It can be controlled with positive, negative or a combination of both voltages. Some standard implementations include antenna changeover, T/R and diversity switching over 2 W. This swi ...more

The AS193-73 is a PHEMT GaAs FET IC high linearity SPDT switch in a SOT-6 plastic package. This switch has been designed for use where extremely high linearity, low control voltage, high isolation, low insertion loss and ultra miniature package size are required. It can be controlled with positive, negative or a combination of both voltages. S ...more

YOKINS Switchboard Instruments are permanent magnet (Alnico high flux density) moving coil type with pivot-jewel suspension. The movement is having high torque to weight ratio and linear one with knife edge pointer for accurate reading. The design and construction of instruments is most modern. sturdiness, simplicity,sensitivity and rigid qual ...more

The AS200-313 is a 56 GHz PHEMT GaAs switch. Designed for transmit-receive applications, this device is capable of switching 2 W microwave signals with 3 V control while maintaining high linearity performance. The switch covers the entire UNII frequency ranges of 5.155.25 GHz through 5.7255.825 GHz.The low loss, high isolation, ...more

The Model 280-A offers a dual-channel, horizontal linear display, while the Model 380-A provides a vertical display. Both units use an external power supply and are ideal  for console mounting, rack mounting, or custom installations. These models are ideal for situations where many channels must be monitored in limited space, such as a mobile ...more

You program the DSP series controllers using MEI's flexible C function libraries with over 250 motion control functions. Combining MEI C libraries with compilers from Microsoft, Borland, Watcom, and Symantec speeds development of complex motion applications. DSP series controllers provide a rich set of software algorithms, including a sophisti ...more

The SHD033 matches the sensitivity of a PMT using solid state amplification of a silicon photodiode. The proprietary preamp is unique in that it preamplifies the current-chopped junction charge of the cell, providing an 82 dB linear response. Built-in temperature control and leakage shielding minimize noise and dark current.  ...more

Bemcos AI100 Altitude Indicator and Pressure Transducer provides a red, 5-digit scaled LED display of chamber or process Altitude, calibrated in feet or meters as well as a linear, scaled output of 4 to 20 mA, 0 to 5 VDC, or 0 to 10 VDC for use with other instruments including process controllers, recorders, and programmable logic controls. ...more

The Ametek Model 1726, Dual Function Digital Tachometer is a dual function instrument providing contact and non-contact measurement of rotational and linear motions. With an accuracy of ± 0.25% of indicating reading ± 1 LSD, the 1726 is ideal for use in production, engineering, inspection, quality control and maintenance. ...more

The AV103-12 GaAs IC FET voltage variable attenuator provides 35 dB attenuation range at 900 MHz controlled by a single positive voltage.The VVA has a linear transfer curve of 9 dB/V slope, with input and output VSWR better than 2.1:1 over all states. Its attenuation range at 1900 MHz is 33 dB. It operates with supply voltage of +5 V and contr ...more

The Series 4B 1/4 DIN Temperature/Process Controller is designed to accept thermocouple, RTD, current or voltage input and provide dual outputs for control. Available outputs include relay/relay, voltage pulse/relay, current/relay, or linear voltage/relay ...more

XFR is the smart choice for research, product development and production test applications such as R&D, magnet control, product design, ATE, process control, electroplating and burn-in.  ...more

The AS218-000 is a broadband transfer switch designed to combine T/R and antenna diversity switching functions on a single IC. The device is designed to handle high power and maintain high linearity at low control voltages. This low cost switch is ideal for Wi-Fi systems and is capable of covering both the 2.4 and 5 GHz bands. ...more

The AS216-339 is a high power IC FET SPDT switch in a plastic SOIC-8 exposed paddle package.This switch has been designed for use where extremely high linearity is required. It can be controlled with positive, negative or a combination of both voltages. Some standard implementations include antenna changeover, T/R and diversity switching over ...more

The ABL 1000 series stages are the highest performance miniature air-bearing stages available. Aerotech has combined over 30 years of precision motion control and positioning system experience with the latest technologies to produce a truly outstanding miniature, linear air-bearing stage. ...more

The EMP400 Series controllers allow easy programming using simple commands. The dual axis model provides coordinated moves via linear interpolation. ...more

The MP 1008, manual prober for 8-inch wafers, is a versatile and economical solution for general diagnostic probing, engineering test and failure analysis of microcircuits. Featuring precision XY stage motion and micrometer control of the probing platform, the MP 1008 may be used with both 4.5-inch and 6-inch wide probe cards, in some instance ...more

The AS219-000 is a PHEMT GaAs IC SP3T antenna switch operating in the 900 MHz and 1800 MHz frequency bands. Switching between the antenna and TX/RX ports is accomplished with 3 control inputs.When the control inputs are driven with the appropriate voltages, a low insertion loss path is provided from an antenna port to a TX port, while the othe ...more

The Model 280-A offers a dual-channel, horizontal linear display, while the Model 380-A provides a vertical display. Both units use an external power supply and are ideal  for console mounting, rack mounting, or custom installations. These models are ideal for situations where many channels must be monitored in limited space, such as a mobile ...more