Data Bus

Traditionally, PC-based waveform digitizers provide raw data to user applications which then analyze the data on the host PC using techniques such as peak detection. Often waveform data throughput exceeds the capacity of the data bus or the speed of traditional peak detection analysis routines. For these requirements, GaGe now offers on-board ...more

The PDA16 is a dual channel waveform capture board that provides a remarkable combination of high speed and high resolution sampling along with a very large memory capacity. Signal frequencies up to 700 MHz can be accurately captured either in baseband or in higher order Nyquist zones using under-sampling techniques. The PDA16 is a PCI/PCI-X 64-b ...more

90MHz 32-bit Motorola Coldfire M5307 CPU, with a processing capacity of 75 MIPS; 16MB SDRAM, 2MB Flash Memory; One 10M Ethernet 10BASET Interface (RJ45), two Asynchronous Serial-ports (UART), one I2C Bus Interface, Real-time Clock, Watchdog Timer Hardware, Four-channel DMA and Dual 16-bit Timers; Two 84-line connectors connecting almost all da ...more

An enhanced bidirectional IEEE-488.2/GPIB to serial interface that can be used to adapt devices with RS-232 and RS-485 (RS-422) serial interfaces to the GPIB Bus. A 256 Kbyte RAM buffers up to 252,000 characters and frees the computer for other tasks while the 4894B transparently transfers data to or from the serial device when in the G mode. ...more

Fault tolerant circuitry allowing the UPS to sustain dead shorts with no risk of damage to the inverter. This is a vital feature in today's data center environments where daily wiring changes on the critical bus can fault the output and cause severe damage to most other UPSs. Precise voltage regulation limits voltage transients to under 5% whe ...more

The compact Personal Daq is ideal for portable data acquisition applications. Multi-function data acquisition modules attach to PCs via Universal Serial Bus (USB 1.0 & 2.0 compatible)  ...more

The QPMC-1553 provides the highest level of performance, flexibility and interface density for MIL-STD-1553A/B on a PMC (PCI Mezzanine Card) module. The QPMC-1553 is integrated with powerful software that reduces development time. All 1553 databus functionality is supported from our advanced API (Application Programming Interface). Standard fe ...more

The IPC-6160 SCSI tester provides the ultimate solution for automated development, qualification, and manufacturing testing of Ultra3 SCSI drives and peripheral devices. This powerful tester consists of a 32-bit PCI plug-in board that supports wide synchronous data transfers at speeds up to 160 MB/sec. It supports single-ended (SE) and low-volt ...more

Dual Digital Up/Downconverter 3U cPCI with FPGA. Up to 2.56 seconds of delay or data capture at 100 MHz. Dual timing buses for independent input and output clock rates.32 pairs of LVDS connections to the Virtex-II Pro FPGA for custom I/O on P3  ...more

The DATATRAC 400H is a handheld data bus analyzer providing powerful capabilities in a lightweight, durable analyzer you can pack in a briefcase or carry to the flight line. This miniaturized version of the DATATRAC 400 provides the same mature, field-proven features including breakpoint troubleshooting mode, 16-label recorder, 128-label trans ...more

The Model 689E Vibration Analyzer is designed to accommodate the vibration testing and balancing of the engines presently being used in the military and commercial aircraft. It operates with a host computer via the RS232 or UDP/IP Ethernet Bus. The salient features are nine data channels (acceleration or velocity inputs) and three tachometer ch ...more

The Model 684E Vibration Analyzer is designed to accommodate the vibration testing of the engines presently being used in the military and commercial aircraft. It operates with a host computer via the RS232 or UDP/IP Ethernet Bus. The salient features are four data channels (acceleration and velocity input). ...more

The Shuttle Bus PCI is an intelligent interface card providing all Launch Data Bus, Ground Data Bus, and Multiplex De-Multiplex Multiple Remote Terminal capability to the Shuttle Bus, as required by NASA specification 84K01203 (Hardware Specification, Launch Data Bus (LDB) and Ground Data Bus (GDB) Interface Board). ...more

The DIN-192 module transparently repeats RS-485 signals at all standard baud rates from 300 to 115.2K baud. Internal control circuitry automatically controls the flow of data on the RS-485 bus. Therefore, the DIN-192 does not require external handshaking signals.   ...more

The Packet-Master USB12 is a Hardware USB Bus Analyser, intended for development of Low and Full Speed USB devices and hubs etc. It comes complete with our Windows application Graphic USB for capturing and displaying every detail of the data interactions on a USB link. ...more

The AXI429 module is designed for testing, simulation and monitoring of ARINC429 data buses, and provides up to 32 configurable ARINC429 transmit and receive channels on a single C-sized VXI module. ...more

The VXI-1553 provides new levels of performance and flexibility for MIL-STD-1553A/B on the VXIbus. Available in multiple configurations, the VXI-1553 includes powerful software that reduces application development time. All 1553 databus functionality is supported from our advanced API (Application Programming Interface) libraries. Standard fea ...more

The DATATRAC 650H is a single channel ARINC 629 data bus analyzer housed in a rugged hand held ABS plastic enclosure. Basic receive and transmit functions are implemented along with a general record mode and a powerful breakpoint mode. ...more

AXIOMTEK's PCI bus Data Acquisition, DIO, Counter/Timer card series implements analog to digital conversion, digital to analog conversion, digital input, digital output, and counter/timer. ...more

Our simplest tester for Fieldbus, the Power and Signal Probe uses LEDs to let you know if your bus has DC power with correct polarity and whether data traffic is present. ...more

Start RS-232 data streams quickly to SPI devices! ...more

The Shuttle Bus VME is an intelligent interface card providing all Launch Data Bus, Ground Data Bus, and Multiplex De-Multiplex Multiple Remote Terminal capability to the Shuttle Bus, as required by NASA specification 84K01203 (Hardware Specification, Launch Data Bus (LDB) and Ground Data Bus (GDB) Interface Board). ...more

The Trig-Tek, Inc. Model 645A Vibration Monitor/Analyzer is designed for use in engine test stands for monitoring and analyzing vibration data from turbojet, turbofan, and turboprop engines. The Model 645A has a bus interface (optional); persmits operation with a computer. All commands and data can be sent over the bus. ...more

The DATATRAC 350H is a portable, battery operated, handheld bus analyzer supporting all versions of the Honeywell/GAMA ASCB Bus. ...more

Configured to time single events or processes which produce start and stop pulses. Duration can be from less than 1 µs to 999,999 hours. Timing resolution to 0.2 µs. Time may be displayed in HH.MM.SS clock format to 99.59.59 with 1 s resolution or in decimal H, M or S format with six-digit resolution. Multiple events can also be accumulated to ...more