Filter Results By:

Products

Applications

Manufacturers

Showing product results. 1276 - 1290 of 1430 products found.

  • Dew Point Analyzer

    CI-IN36 - Shanghai ChangAi Electronic Science & Technology Co.,Ltd

    CI-IN36 adopts the sensor that is made of thin polymer film, which can test the dew point with good stability. It will not influenced by condensed water and most compounds. This analyzer has received automatic zero point calibration and gain return patents with wide measure range, high accuracy, good stability and high performance cost ratio. - See more at: http://en.ci-ele.com/470baa2f-f4d7-af3b-c88b-b26356a1660d/8e93bc9f-4658-e0c4-2205-0be00b504269.shtml#sthash.KzPqj2sw.dpuf

  • Wet-Mateable Connector, 10k V, 250 A, for Deep Sea Pumping, Processing, and Boosting Applications

    Nautilus WM10-250 - Teledyne Marine ODI

    ​Trends in subsea oil & gas production are moving towards deeper water and longer step out distances. These trends drive demand for higher power equipment and higher power delivery and distribution capabilities subsea with high pressures and temperatures. Teledyne ODI'™s Nautilus WM10-250 is designed with the benefit of advanced material science testing and certification, and with insulation and redundant sealing systems for reliable performance in long-term harsh environments.

  • Leather Testing Machine

    Dongguan Kejian Instrument Co., Ltd.

    Test method uses clean ball placed within the material applications, steel ball itself of the impedance and total weight, must be in conformity with the provisions, on this condition detection material zigzag waterproof penetration index, using the latest inductive components and special design, test as long as materials applications in water infiltration immediately automatic stop counting or in setting time (test times) arrived, namely automatic stop and display the time or times.

  • Precision Hygro-Thermometer

    Extech RH490 - Extech Instruments Corporation

    Anyone whose job relies on calculating humidity levels will appreciate the Extech Hygro-Psychrometer. In addition to measuring relative humidity in 30 seconds, this handheld instrument captures dew point, wet bulb, temperature and water vapor levels (Grams per Kilogram and Grains per Pound). This utility tool will store maximum and minimum readings until the memory is cleared and includes a data-hold button for rapidly fluctuating measurements. Complete with carrying case and 9V battery.

  • Gas Filter Correlation CO Analyzer

    Model T300U - Teledyne Advanced Pollution Instrumentation

    The Model T300U Trace-level CO analyzer has been developed specifically to address the challenges of low level monitoring as required, for example, in the US NCore network. Using IR absorption with a Gas Filter Correlation Wheel, the T300U is designed to allow ultra-sensitive CO measurements while still meeting the requirements for use as a US EPA compliance analyzer.The optical bench is enclosed in a temperature controlled oven, dramatically decreasing instrument noise and drift. The objective and field mirrors in the sample cell are gold plated to maximize signal to noise performance, while a temperature-controlled Nafion dryer on the inlet minimizes water interference caused by ambient humidity changes. Periodically, the T300U seamlessly corrects its baseline by routing the sample through a heated catalytic CO scrubber. This Auto Reference function corrects zero drift and reduces the effect of interferences.

  • Level System

    Universal IV - AMETEK Drexelbrook

    The Universal IV level system is built upon Drexelbrook’s 50 years of experience in level measurement and is the most advanced RF continuous level measurement system available on the market.Universal IVThe Universal IV Series level system is backward compatible with the industry standard Universal III, Universal Lite, Universal II and RCT Series and is the ideal solution for a wide array of level applications in industries such as oil and gas refining, water and wastewater along with the pharmaceutical and biotech industries.This unique level system include worldwide hazardous location approval, standard display/keypad, autoranging capabilities and state of the art stable and accurate measurement.It is immune to vapor, dust and foam interference as well as to tank obstructions such as nozzles, ladders, pipes and agitators.The level system can be used as an integral or remote installation. For harsh environmental conditions the Universal IV level system can be installed remotely away from the probe or vessel.

  • Meter Pulse Splitter

    SY027 - Synectic Electronics

    Our SY027 Pulse Splitter is designed to convert pulses from meters or other turbine devices and transmit the same pulse via two relay outputs to enable two separate instruments to measure the rate simultaneously. It can be used with either electricity, water or gas meters (NOT ATEX). The SY027 PSO has been designed for applications where a pulse is required to be isolated, re-powered and repeated on two separate outputs. It works with inputs from reed switch signals, Opto coupler, open collector, NAMUR or TTL pulse (up to 25V) with automatic debounce, as well as with high frequency pulses. The speed of pulses can be accommodated from either a very slow to super-fast. Isolated relay outputs can be created by the PSR version when an NPN pulse output from a meter needs to be converted to a single relay isolated output or two.

  • Non-Contact Voltage Tester

    NCVT-3 - Klein Tools, Inc.

    Provides non-contact detection of AC voltage.Detects 12 – 1000V AC with simultaneous visual and audible voltage indicators.Bright flashlight illuminates work area and may be used independent of voltage detection function.Visual LED bar graph indicates the presence of voltage – the higher the voltage sensed, or the closer to the voltage source, the more LEDs light up.Bar graph visual voltage indicator utilizes up to five vibrant LEDs for easy interpretation/viewing.Audible voltage indicator beeps at a greater frequency the higher the voltage that is sensed, or the closer to the voltage source.“Auto Power-Off” conserves and extends battery life.Screw-thread battery cap with O-ring ensures protection against dust and water ingress.Lightweight, compact tool with pocket clip provides convenient storage and quick access.IP67: Dustproof and waterproof.6.6 feet / 2 meter drop protection.CAT IV safety rating for 1000V.Conforms to CE requirements.

  • The Nanomotor®

    Klocke Nanotechnik

    The patented Nanomotor® is a piezo driven linear motor. It is a multifunctional basic part for many positioning and manipulation devices. It has a positioning stroke of up to more than a centimeter while operating with atomic resolution. The Nanomotor thus bridges eight orders of magnitude. The Nanomotor consists of a cylindrical housing and a slider with a free axial hole inside. It combines high resolution in the sub-nanometer range with a large positioning stroke. The Nanomotor utilizes a piezo tube for fine positioning and a shock wave produced by the same piezo tube for coarse movements. The small Nanomotor is half the size of a match stick. It can lift six times its own mass. Every point of its stroke can be reached with a speed of up to 1 mm/s. The Nanomotor also works in ultrahigh vacuum or even under water. It is driven by a PC card at a supply voltage of only ±15 volts.

  • UV Weather Resistance Test Chamber

    ACE Technology

     1-1.Typical Application  Used for nonmetal materials aging test, to inspect the resistance ability of sunshine and artificial light.    1-2.Standard  GB/T14522-93 " - plastic industrial products, paint, rubber material - artificial climate accelerated test methods"   GB/T16585-96 " - vulcanized rubber artificial weathering (fluorescent UV lamps) test methods"   GB/T16422.3-97 "plastic laboratory light exposure test methods"   Other terms of the corresponding standard of design and manufacturing;    2.Features  Imported USA made Q-Panel lamps;   Spray function, condensing function, UV function, can be circulate  Heating from water tanker in the inner bladder, heating fast, temperature uniform.  Drain system match to backset-style and U-style deposition device, convenient to clean.  Black board connect to temperature sensor, the device controls heating, lead to stable temperature.

  • Control Devices

    Circutor, sa

    Solutions for monitoring and recording any value you wish to manage (electricity, water, gas consumption, temperatures, flow rates, pressures, units produced, etc.), either through communications or through pulse logger systems. The control system family contains the LINE solution to create a comprehensive energy management systems (SGEi), LM pulse loggers and MDC controllers to avoid surcharges in the electric bill by preventing the contracted capacity in electrical installations from being exceeded.

  • Solar Test Systems

    Princeton Applied Research

    Ametek Scientific Instruments manufactures a range of application specific XM (Xtreme Measurement) products focused on solar cell / photovoltaic research (developed in collaboration with Professor Laurie Peter of the University of Bath, UK). These products are so versatile that they can also be used for photoelectrochemical (PEC) water splitting applications; and make use of Solartron’s unique high performance XM specified potentiostats and frequency response analyzers to provide a full complement of techniques for research into energy, corrosion and analytical electrochemistry.

  • Solar Test Systems

    Ametek Scientific Instruments

    AMETEK Scientific Instruments manufactures a range of application specific XM (Xtreme Measurement) products focused on solar cell / photovoltaic research (developed in collaboration with Professor Laurie Peter of the University of Bath, UK). These products are so versatile that they can also be used for photoelectrochemical (PEC) water splitting applications; and make use of Solartron’s unique high performance XM specified potentiostats and frequency response analyzers to provide a full complement of techniques for research into energy, corrosion and analytical electrochemistry.

  • Conductivity Meters

    GAO Tek Inc.

    GAOTek conductivity meters report the conductivity of a substance as an inverse function of resistivity. Resistivity is measured in ohms/cm, while conductivity is measured in mhos/cm. Our portable conductivity meters and testers are ideal for water conditioning, medical, beverage, laboratory, and other industrial applications. Our high-performance conductivity meters are reliable, high quality, accurate and affordable equipment that facilitate easy inspection and testing. They are compact,  portable instruments that allow a user to conveniently work in complex conditions in a lab or onsite.

  • High Quality Transformer Oil Dielectric Strength Tester

    AS-023A - Chongqing Assen Power Equipment Co., Ltd

    AS-023A Series High Quality Intelligent Transformer Oil Dielectric Strength Tester is specially designed for testing dielectric strength (Breakdown Voltage) of transformer oil. The breakdown voltage (dielectric strength) is one of the most important parameters of transformer oil, it is a rule of the voltage withstand. The value of breakdown voltage (dielectric strength) indicates whether the oil contains water, impurity and electric particles, and you’ll know the oil value via the breakdown voltage (dielectric strength).

Get Help