Filter Results By:

Products

Applications

Manufacturers

Showing recent results 1111 - 1125 of 1210 products found.

  • Gas Analysis

    HPR-40 DSA - Hiden Analytical Ltd.

    Hiden Analytical offers class-leading gas monitoring solutions designed to obtain and quantify complex species in liquid samples. Our ultra-precision HPR-40 DSA is a compact membrane inlet mass spectrometer (MIMS) and a versatile instrument suited to dissolved and evolved species analysis. Direct probes, flow through probes and large circular membrane cells are available to address a broad application range in sediment, sea water, sludge and groundwater studies.

  • Dissolved Ozone Analyzer

    Model 470 - Teledyne Advanced Pollution Instrumentation

    The Model 470 is a state-of-the-art Dissolved Ozone Sensor designed for semiconductor Wet Bench tools and many other industrial processes. It provides continuous measurement of dissolved ozone in deionized water or sulfuric baths with concentrations up to 150 mg/L. The Model 470 is “clean-ready” for high purity semiconductor processes, and is designed to be simply spliced in-line in the recirculation loop of any wet bench tool with flow rates up to 150 SLPM.

  • Precision Hygro-Thermometer

    RH490 - Extech Instruments Corporation

    Anyone whose job relies on calculating humidity levels will appreciate the Extech Hygro-Psychrometer. In addition to measuring relative humidity in 30 seconds, this handheld instrument captures dew point, wet bulb, temperature and water vapor levels (Grams per Kilogram and Grains per Pound). This utility tool will store maximum and minimum readings until the memory is cleared and includes a data-hold button for rapidly fluctuating measurements. Complete with carrying case and 9V battery.

  • Gas Filter Correlation CO Analyzer

    Model T300U - Teledyne Advanced Pollution Instrumentation

    The Model T300U Trace-level CO analyzer has been developed specifically to address the challenges of low level monitoring as required, for example, in the US NCore network. Using IR absorption with a Gas Filter Correlation Wheel, the T300U is designed to allow ultra-sensitive CO measurements while still meeting the requirements for use as a US EPA compliance analyzer.The optical bench is enclosed in a temperature controlled oven, dramatically decreasing instrument noise and drift. The objective and field mirrors in the sample cell are gold plated to maximize signal to noise performance, while a temperature-controlled Nafion dryer on the inlet minimizes water interference caused by ambient humidity changes. Periodically, the T300U seamlessly corrects its baseline by routing the sample through a heated catalytic CO scrubber. This Auto Reference function corrects zero drift and reduces the effect of interferences.

  • Non-Contact Voltage Tester

    NCVT-3 - Klein Tools, Inc.

    Provides non-contact detection of AC voltage.Detects 12 – 1000V AC with simultaneous visual and audible voltage indicators.Bright flashlight illuminates work area and may be used independent of voltage detection function.Visual LED bar graph indicates the presence of voltage – the higher the voltage sensed, or the closer to the voltage source, the more LEDs light up.Bar graph visual voltage indicator utilizes up to five vibrant LEDs for easy interpretation/viewing.Audible voltage indicator beeps at a greater frequency the higher the voltage that is sensed, or the closer to the voltage source.“Auto Power-Off” conserves and extends battery life.Screw-thread battery cap with O-ring ensures protection against dust and water ingress.Lightweight, compact tool with pocket clip provides convenient storage and quick access.IP67: Dustproof and waterproof.6.6 feet / 2 meter drop protection.CAT IV safety rating for 1000V.Conforms to CE requirements.

  • The Nanomotor®

    Klocke Nanotechnik

    The patented Nanomotor® is a piezo driven linear motor. It is a multifunctional basic part for many positioning and manipulation devices. It has a positioning stroke of up to more than a centimeter while operating with atomic resolution. The Nanomotor thus bridges eight orders of magnitude. The Nanomotor consists of a cylindrical housing and a slider with a free axial hole inside. It combines high resolution in the sub-nanometer range with a large positioning stroke. The Nanomotor utilizes a piezo tube for fine positioning and a shock wave produced by the same piezo tube for coarse movements. The small Nanomotor is half the size of a match stick. It can lift six times its own mass. Every point of its stroke can be reached with a speed of up to 1 mm/s. The Nanomotor also works in ultrahigh vacuum or even under water. It is driven by a PC card at a supply voltage of only ±15 volts.

  • Ultrasonic & Mass Flow Meters

    GAO Tek Inc.

    GAOTek offers high quality, affordable, secure and accurate Ultrasonic Flow Meters for sale to the United States, Canada and globally. Ultrasonic Flow Meters often have a sending and a receiving transducer for measuring the velocity of fluids to accurately calculate the flow of volume in a pipe by using sound waves, acoustic waves or vibrations with a frequency of >20 KHz. GAOTek offers a variety of top-notch Ultrasonic Flow Meters designed for different environments, from wide pipes to an all liquid environment, such as sea water, oil, sewage, alcohol, et al. GAOTek’s easy to use Ultrasonic Flow Meters come with a built-in printer and a built-in data logger. They provide accurate readings and have an accuracy rate of ±1% at rates greater than 0.2mps. They also offer multi-language menu selections, long lasting battery life for continuous usage, large LCD screens, and a huge storage.

  • UV Weather Resistance Test Chamber

    ACE Technology

     1-1.Typical Application  Used for nonmetal materials aging test, to inspect the resistance ability of sunshine and artificial light.    1-2.Standard  GB/T14522-93 " - plastic industrial products, paint, rubber material - artificial climate accelerated test methods"   GB/T16585-96 " - vulcanized rubber artificial weathering (fluorescent UV lamps) test methods"   GB/T16422.3-97 "plastic laboratory light exposure test methods"   Other terms of the corresponding standard of design and manufacturing;    2.Features  Imported USA made Q-Panel lamps;   Spray function, condensing function, UV function, can be circulate  Heating from water tanker in the inner bladder, heating fast, temperature uniform.  Drain system match to backset-style and U-style deposition device, convenient to clean.  Black board connect to temperature sensor, the device controls heating, lead to stable temperature.

  • Level System

    Universal IV - AMETEK Drexelbrook

    The Universal IV level system is built upon Drexelbrook’s 50 years of experience in level measurement and is the most advanced RF continuous level measurement system available on the market.Universal IVThe Universal IV Series level system is backward compatible with the industry standard Universal III, Universal Lite, Universal II and RCT Series and is the ideal solution for a wide array of level applications in industries such as oil and gas refining, water and wastewater along with the pharmaceutical and biotech industries.This unique level system include worldwide hazardous location approval, standard display/keypad, autoranging capabilities and state of the art stable and accurate measurement.It is immune to vapor, dust and foam interference as well as to tank obstructions such as nozzles, ladders, pipes and agitators.The level system can be used as an integral or remote installation. For harsh environmental conditions the Universal IV level system can be installed remotely away from the probe or vessel.

  • Meter Pulse Splitter

    SY027 - Synectic Electronics

    Our SY027 Pulse Splitter is designed to convert pulses from meters or other turbine devices and transmit the same pulse via two relay outputs to enable two separate instruments to measure the rate simultaneously. It can be used with either electricity, water or gas meters (NOT ATEX). The SY027 PSO has been designed for applications where a pulse is required to be isolated, re-powered and repeated on two separate outputs. It works with inputs from reed switch signals, Opto coupler, open collector, NAMUR or TTL pulse (up to 25V) with automatic debounce, as well as with high frequency pulses. The speed of pulses can be accommodated from either a very slow to super-fast. Isolated relay outputs can be created by the PSR version when an NPN pulse output from a meter needs to be converted to a single relay isolated output or two.

  • EDX-FTIR Contaminant Finder/Material Inspector

    EDXIR-Analysis Contaminant Finder/Material Inspector - Shimadzu Corp.

    EDXIR-Analysis software is specially designed to perform qualitative analysis using data acquired by an energy dispersive X-ray (EDX) fluorescence spectrometer and a Fourier transform infrared spectrophotometer (FTIR). This software is used to perform an integrated analysis of data from FTIR, which is excellent at the identification and qualification of organic compounds, and from EDX, which is excellent at the elementary analysis of metals, inorganic compounds and other content. It then pursues identification results and the degree of matching. it can also be used to perform EDX or FTIR data analysis on its own. The library used for data analysis (containing 485 data as standard) is original to Shimadzu, and was created through cooperation with water supply agencies and food manufacturers. Additional data can be registered to the library, as can image files and document files in PDF format.  It is also effective for the linked storage of various types of data as electronic files.

  • EDXIR-Analysis Contaminant Finder/Material Inspector

    Shimadzu Corp.

    EDXIR-Analysis software is specially designed to perform qualitative analysis using data acquired by an energy dispersive X-ray (EDX) fluorescence spectrometer and a Fourier transform infrared spectrophotometer (FTIR). This software is used to perform an integrated analysis of data from FTIR, which is excellent at the identification and qualification of organic compounds, and from EDX, which is excellent at the elementary analysis of metals, inorganic compounds and other content. It then pursues identification results and the degree of matching. it can also be used to perform EDX or FTIR data analysis on its own. The library used for data analysis (containing 485 data as standard) is original to Shimadzu, and was created through cooperation with water supply agencies and food manufacturers. Additional data can be registered to the library, as can image files and document files in PDF format.  It is also effective for the linked storage of various types of data as electronic files.

  • 15"/17"/19" industrial panel PC with Intel Atom E3845 Processor and Powder Coated Steel Housing (IP65, Wall Mount)

    Giant-B15/B17/B19 - ADLINK Technology Inc.

    Giant Series panel PCs are designed with maximum reliability in mind. The fanless, 15, 17 and 19-inch Giant Series panel PCs offer fully enclosed, IP65 rated protection against water and dust. These rugged systems also feature optional solid state flash drives (SSD) instead of hard drives with rotating disks (HDD) for additional shock and vibration resistance, and their fanless design allows them to function reliably in a temperature range from 0°C to 40°C.

  • RH Sensors

    Premier Electrosystems

    Humidity is the measure of the amount of water vapor present in the air. Humidity is mostly calculated as Relative humidity. For industrial and medical environments relative humidity becomes an important factor. A rise or fall in the values of humidity, beyond threshold levels, can lead to malfunctioning of control systems, decomposition of chemicals used in manufacturing process, reduction of shelf life of food products, corrosion of electronic components, formation of condensation and errors in weather prediction systems. So, as a security and safety factor, measurement of humidity values is very important.

  • Inductive EXTRA PRESSURE Up To 200 Bar

    Contrinex AG

    Dependable, accurate presence- and position-sensing at pressures up to 200 bar requires world-class performance and build quality. Contrinex EXTRA PRESSURE inductive sensors deliver exactly that, operating continuously in permanently pressurized conditions and at water depths up to 1,000 meters. The combination of a stainless-steel housing and a permanently bonded ceramic or sapphire-glass sensing face guarantees robustness and exceptional reliability in miniature packages sized from ø3 to M8.  An IO-Link interface is also available for communication in PNP NO versions.

Get Help