Filter Results By:




Showing recent results 1036 - 1050 of 1054 products found.

  • Ultra Low Pressure Transmitter

    P532 - Validyne Engineering

    Validyne's P532 Pressure Transmitters are ideally suited for measuring extremely low liquid and gas pressures in industrial applications. Full-scale differential pressure ranges from 0.10 H2O to 2 H2O with line pressure rating of 100 psig, and ranges of 2 H2O to 3200 psid with line pressures up to 3200 psig are offered. Gauge pressure ranges start at 0.10 H2O and absolute pressure from 0.08 psia full-scale. This unique design, which utilizes a diaphragm-type variable reluctance pressure sensor, provides many outstanding advantages including:

  • BHF Concentration Monitor

    CS-137 - HORIBA, Ltd.

    The CS-137 is a high-precision chemical solution concentration monitor designed to meet the strict demands of semiconductor wet-etching processes. Etching processes use BHF solution to etch silicon oxide and remove particles from the wafer surface. The CS-137 continually monitors each component of the BHF solution (NH4F/HF/H2O), alerting the user each time the solution is replaced or replenished. This allows you to maintain the concentration of the BHF solution within the required component ranges, while eliminating unnecessary solution replacement.

  • CO2 And H2O Monitor

    EGA30 - Opti-Sciences, Inc.

    A highly stable monitoring system that measures CO2 to 1ppm in a range of 0-2000ppm, and H20 to 1% relative humidity in a range of 0-100% relative humidity. The instrument is designed for long-term monitoring.

  • CO2, H2O And O2 Analyzer

    EGA41 - Opti-Sciences, Inc.

    Affordable, portable, bench-top, triple gas analyzer with integral data logging to SD memory card.

  • Corrosive Analyzers

    Tiger Optics llc

    Analyzer provides users with the unmatched accuracy, reliability, speed of response and ease of operation that users of Tiger Optics analyzers know and expect. Featuring Tiger Optics’ powerful Cavity Ring-Down Spectroscopy-based moisture sensor in a very compact and economic analyzer design, this versatile analyzer allows users to measure moisture in most inert, corrosive and toxic gases with just one device. Users also enjoy freedom from requirements such as periodic sensor maintenance, span calibrations, purifier replacement and pump rebuilds. As a result, the HALO 3 H2O analyzer is ideally suited to many applications where moisture measurement is extremely critical. These applications include fixed bulk gas continuous quality control, portable mobile analytical carts, process tool monitoring, air separation, gas cylinder quality control and many other demanding applications.

  • Digital Absolute Pressure Meter

    Model KM 8070 - KUSAM-MECO

    KM 8070 is an absolute pressure measuring instrument with 8 units (Pa, hPa, mbar, mmH2O, mmhg, inHG, in H2O, psi). It is normally used to measure absolute pressure, e.g. for pressure compensation in velocity measurement in ducts, laboratories and production processes. Barometric measurement and height measurements between two points are also possible. With hold, MAX, MIN, and AVG function, KM 8080 is widely used in HVAC, Laboratories and architecture project. With our reputation for quality products, you can find it is the most economic instruments for pressure meter.

  • Digital Manometer with 11 Units of Measure

    PDMM01 - Pyle Audio Inc.

    11 Selectable Units of Measure (in H2O, Psi, Mbar, Bar, kPa, inHg, mmHg, Ozin2, ftH2O, cmH2O, KgCm)Display Max, Min, Average, with Relative TimeLarge LCD Backlit Dual DisplayZeroing, Offset, and Data CompensationLow Battery Display and Automatic ShutdownData Hold and Error CodeAccuracy: +/- 0.3% FSO (25 C)Repeatability: +/- 0.2% (Max +/- 0.5% FSO)Linearity/Hysteresis: +/- 0.29% FSOMaximum Pressure: 10 PSIResponse Time: 0.5 Sec.Power Supply: 9V Battery (Included)2 Soft Hoses IncludedDimensions: 6.69' H x 2.17' W x 1.30' DWeight: 5.82 oz.Sold as : Unit

  • Gas Analyzer Transdox

    3100G - Amperis sl

    The Transdox FM200 (HFC227ea*) IR analyzer is a high precision bench mounted gas analyzer designed for monitoring and measuring the purity of FM200 (HFC227ea) gas. The Infra-red cell technology provides extremely stable and accurate readings in only a few minutes. The analyzer offers measurements of FM200 (HFC227ea) in the 0% to 100% range and also measures the moisture content of the FM200 (HFC227ea) with the built-in H2O sensor (-100 to+20°Cdp).

  • HF/HNO3 Monitor

    CS-153N - HORIBA, Ltd.

    The CS-153N is a high-precision chemical solution concentration monitor designed to meet the strict demands of semiconductor wet-etching processes. Etching processes use HF/HNO3 solution to etch silicon oxide and remove particles from the wafer surface. The CS-153N continually monitors each component of the HF/HNO3 solution (HF/HNO3/H2O), alerting the user each time the solution is replaced or replenished. This allows you to maintain the concentration of the HF/HNO3 solution within the tolerance range, while eliminating unnecessary solution replacement.

  • Low Range Low Cost OEM Differential Pressure Transducer

    P17 - Validyne Engineering

    The P17 OEM Low Range Low Cost pressure transducer features high sensitivity to very low pressures with full scales available down to 0.1 In H2O. Output signal is 5 Vdc and power can be +5 to +28 Vdc. Zero and Span adjustments are included. The P17 has a robust steel sensor construction.

  • Multigas Analyser

    Rapidox 7100 - Cambridge Sensotec

    The Rapidox 7100 Multigas Analyser is a high specification instrument designed for the analysis, control and monitoring of process gas in a wide range of industries. It allows the option of selecting multiple gas sensing configurations to suit the particular application. The analyser is housed within a 19″ (482mm) enclosure for convenient mounting into an industry standard test equipment rack. Up to six gases are simultaneously measured using a range of high precision gas sensors; each sensor is specially designed and calibrated to avoid any cross interference effects with the background process gas. Safety is ensured by the inclusion of flashback arrestors in the gas measuring circuit where required. Measurable gases may include: Measurable gases include amongst others: CO2, CO, H2O, O2, C2H4, SO2, CH4, H2 and H2S.

  • Portable Photosynthesis System

    LI-6400XT - Li-Cor Environmental, Inc.

    The LI-6400 was the first photosynthesis measurement system to put the CO2 and H2O gas analyzers in the sensor head. These dual path, non-dispersive infrared analyzers feature an open path design with the optical bench of the sample analyzer open directly to the leaf chamber mixing volume. Leaf dynamics are measured in real time, preventing confounding correlations between gas exchange and changes in environmental driving variables.

  • Product Range

    Solus - Protea Ltd

    Introducing Protea's new range of laser gas analysers - Solus. The Solus platform represents an extension of Protea's spectroscopic gas analysis equipment into laser based technology, allowing for highly selective, quick response and low range measurements of 1 or 2 gases in a cost-effective, re-configurable package. Solus utilises the latest in Tunable Laser Diode Absorption Spectroscopy (TDLAS), together with the best in micromachining technology, to deliver a precisely controlled narrow wavelength that can be tuned over a small range. The narrow linewidth allows for selection of precise spectral absorbance in the NIR region, free from cross-interferences of other absorbing gases. For some tuning ranges, a number of gases can be measured by tuning a single laser diode e.g. NH3 and H2O.

  • SC-1 Monitor

    CS-131 - HORIBA, Ltd.

    The CS-131 is a high-precision chemical concentration monitor designed for use with SC-1 solutions used in cleaning processes during semiconductor manufacturing. It offers a faster response speed in a more compact size than anything available to date. The CS-131 monitors the concentrations of the individual components of the SC-1 solutions (NH3/H2O2/H2O) which is widely used to remove particles and organic substances. The monitor has a number of outputs which can be utilized to keep the concentrations of the individual elements of the SC-1 solutions within the allowable ranges; this eliminates unnecessary replacement of chemicals potentially increasing bath life time and reducing chemical cost. In addition, a model with an integrated cooling unit is available, allowing accommodation of a broader range of sample temperatures.

  • SPM Monitor

    CS-150 - HORIBA, Ltd.

    The CS-150 is a high-precision chemical concentration monitor designed for use with the SPM solutions used in semiconductor-manufacturing cleaning processes. Featuring fast response and a compact size, the CS-150 continually monitors the concentrations of the various components of the SPM solutions (H2SO4/H2O2/H2O) used to remove metal ions and organic substances. Feedback control based on the monitor output is used to keep the concentrations of the SPM solutions within the allowable ranges and to eliminate unnecessary replacement of chemicals.A short measuring cycle allows the accurate tracking of chemical concentrations, while the compact design facilitates integration with a cleaning device.