Filter Results By:

Products

Applications

Manufacturers

Showing recent results 796 - 810 of 1067 products found.

  • USBL System

    TrackIt - Teledyne Benthos

    ​The first in a series of Teledyne Benthos USBL deliverables, the "Short Range USBL" is geared toward the tracking and positioning of shallow water autonomous or remotely operated vehicles. Leveraging Teledyne Benthos extensive technical expertise and field experience in acoustic positioning and communications, this new system brings it all together with a powerful topside processing package, intuitive user interface, communications, and highly accurate, field proven subsea electronics.

  • Wires and Pipe Locator

    LKZ-720 - Sonel S.A.

    *Detection of wires and cables (live or not)**detection of cables in ceilings, walls and floors,**detection of breaks in cables,**tracing cables in building installation,**locating power points and switches in buildings,**locating short circuits between leads,**tracing shielded cables,**tracing cables in metal ducts.*Identification of fuses on the distribution board.*Tracing underground cables.*Tracing conductive water and heating pipelines.*Non-contact detection of live cables.

  • Hydrogeology

    SID - PASI srl

    SID calculates hydraulic sections of any form and of any geometrical and hydraulic characteristics. The program determines, for a given section, the height and speed values reached by the water, assuming that the channel has a prismatic form of infinite length. The formula used by the program utilises the average velocity as a function of the mean radius of the section, that is equal to the ratio between the area of the hydraulic section and the wet boundary, of the loss of load and of the friction coefficient.

  • Solar Pump Inverter

    45-100kw - Shenzhen Setec Power Co., Ltd.

    Solar pumping system is composed of a solar array,a pump and a solar pumping inverter. Based on the design philosophy that it is better to store water than electricity , there is no energy storing device such as storebattery in the system. The solar array,an aggregation of many solar modules connected in series and parallel , absorbs sunlight radiation and converts it into electrical energy , providing dynamical water for the whole system. The pumping inverter controls and adjusts the system operation and converts the DC produced by solar array into AC to drive the pump , and adjust the output frequency intensity to realize the maximumpower point tracking (MPPT) . The pump, drive by 3-phase AC motor,can draw water fromthe deep wells or rivers and lakes to pour into the storage tank or reservoir , or directly connect to the irrigation system ,fountain system,ect. According to the actual systemdemand and installation conditions,different types of pump such as centrifugal pump, axial flow pump,mixed-flow pump or deep-well pump can be used.

  • Solar Pump Inverter

    22-37kw - Shenzhen Setec Power Co., Ltd.

    Solar pumping system is composed of a solar array,a pump and a solar pumping inverter. Based on the design philosophy that it is better to store water than electricity , there is no energy storing device such as storebattery in the system. The solar array,an aggregation of many solar modules connected in series and parallel ,  absorbs sunlight radiation and converts it into electrical energy , providing dynamical water for the whole system. The pumping inverter controls and adjusts the system  operation and converts  the  DC produced  by  solar array  into  AC  to drive the pump ,  and adjust  the output  frequency  intensity to realize the maximumpower point tracking (MPPT) . The pump, drive by 3-phase AC motor,can draw water fromthe deep wells or rivers and lakes to pour  into the storage tank or reservoir , or directly connect to the irrigation system ,fountain system,ect. According to the actual systemdemand and installation conditions,different types of pump such as centrifugal pump, axial flow pump,mixed-flow pump or deep-well pump can be used.

  • Membrane Hydrophones

    Precision Acoustics LTD

    Membrane Hydrophones Precision Acoustics'' manufactures high quality co-planar Membrane Hydrophones which have been developed to satisfy the stringent requirements of MHz ultrasound measurements. The Differential Membrane Hydrophone model is suited to the most demanding, wide bandwidth measurements situations but requires water with very low conductivity. The differential input preamplifier is embedded in the hydrophone ring, and the electrode pattern on the membrane has been re-designed to ensure an asymmetrical electrode area. The result is an improvement in the signal-to-noise ratio to allow membrane hydrophones based on 9 m to measure harmonic components in excess of 120 MHz The UT model of Membrane Hydrophone is the product of choice for broad bandwidth measurements where water quality cannot be guaranteed. They can be used on its own or in conjunction with Precision Acoustics'' Signal Amplifier to reduce noise and add a limited amount of gain over a wide bandwidth. For additional gain the membrane hydrophone can also be used with the Hydrophone Booster Amplifier to add 28dB of gain.

  • Portable Sulphuric Acid Dewpoint Temperature Monitor

    Walsn Enterprises Ltd.

    The fuels used in boilers, such as coal, heavy oil and natural gas, contains S. during the combustion process, S and O₂ form SO₂, and a small amount of SO₂ is converted into SO₃ under catalysis of Fe₂O₃, V₂O₅ and other catalysts. Under normal circumstances, the volume of SO₃ in the boiler flue gas is 1×10-6~50×10-6, and the water vapor is about 10%. When the temperature of the flue gas is below 200°C, SO₃ and the water vapor are completely combined into H₂SO₄ vapor. A small amount of H₂SO4 vapor will significantly increases the acid dew point. When the surface temperature of the boiler heat exchange equipment is lower than the flue gas acid dew point, the H₂SO₄ vapor will condense on the surface to become sulfuric acid solution with a concentration of about 80%, which will adhere to the surface of the heat exchanger and cause acid corrosion. Typical equipment that is prone to corrosion includes air preheaters, induced draft fans and flue walls.

  • 10 to +60C (+14 to +140F) Measurement Range

    EL-USB-RT - Lascar Electronics Ltd

    When plugged into the USB port of a PC installed with the purpose designed software underWindows 2000, XP and Vista, EL-USB-RT measures temperature and relative humidity from -10 to +60C (+14 to +140F) and 0 to 100%RH. The PC displays the temperature, humidity and dew point(the temperature at which water vapor present in the air begins to condense) in real-time and saves it to a file which can store up to 7 day's worth of data.

  • Xenotest Xenon-Arc Instruments

    Atlas Material Testing Technology

    These premium rotating rack, xenon-arc air-cooled weathering instruments have an array of optional features to meet virtually all global weathering and lightfastness test methods. They incorporate state-of-the-art controls, including on-the-rack, radio controlled sensor technology for superior monitoring of light and temperature. They provide highly efficient systems for water and power to provide economical operation. The intuitive user interface makes programming and operation easy.

  • 868MHz RF Test System with Drawer Adapter

    Konrad Technologies GmbH

    RF and wireless turnkey test solutions for high-performance measurements at microwave frequencies.This RF-system is able to test products in an 868 MHz frequency range, for example radio systems, heat-cost distributors, water and heat meters. It is designed as a semi-automatic manual work station and allows parallel placement and automatic functional test of two-times two DUTs in a tandem arrangement. To guarantee a stable measuring result, the test system has two identical RF-chambers

  • Benchtop NMR Analyser

    MQC+ - Oxford Instruments plc

    MQC+ benchtop NMR (Nuclear Magnetic Resonance) analyser for the measurement of oil, water, fluorine and solid fat in a variety of samples in a wide range of industries. The MQC+ replaces wet chemical analysis, which uses hazardous chemicals, and allows the measurement of more samples much faster. Unlike wet chemical methods, the MQC+ does not destroy the sample being measured. It can also measure physical properties including crystallinity and density of polymers.

  • Dew Point Analyzer

    CI-IN36 - Shanghai ChangAi Electronic Science & Technology Co.,Ltd

    CI-IN36 adopts the sensor that is made of thin polymer film, which can test the dew point with good stability. It will not influenced by condensed water and most compounds. This analyzer has received automatic zero point calibration and gain return patents with wide measure range, high accuracy, good stability and high performance cost ratio. - See more at: http://en.ci-ele.com/470baa2f-f4d7-af3b-c88b-b26356a1660d/8e93bc9f-4658-e0c4-2205-0be00b504269.shtml#sthash.KzPqj2sw.dpuf

  • DO 110 Meter

    DO110 - OAKTON Instruments

    The OAKTON DO 110 meter ensures high accuracy with independent 100% and zero adjustment calibrations, and offset adjustment capabilities. It stores and recalls 100 dissolved oxygen readings with corresponding temperature- great for field readings. This meter even displays electrode diagnostics to help determine when you need to service or replace the probe. The front keypad is water resistant. Includes a dissolved oxygen/ temperature probe, electrolyte solution, and batteries.

  • Engine Dynamometers

    Taylor Dynamometer, Inc.

    Taylor’s engine dynamometers deliver the best overall value by driving productivity, ensuring uptime and bringing you rapid return on investment. We offer a variety of engine dynos including hydraulic (water brake), eddy current, AC, portable and small engine dynos. We even offer mobile test centers and engine dynamometer accessories. Search below to find what you’re looking for, or give us a call today.

  • Handsheet Former

    DRKPL6 - Shandong Drick Instruments Co., Ltd.

    The PL6 handsheet former manufactured by our company is applicable to research and experiments in paper-making research institutes and paper mills. It copies pulp into a sample sheet, then puts the sample sheet on the water extractor for drying and then carries out the inspection of the physical intensity of the sample sheet to appraise the performance of the raw material of pulp and beating process specifications. Its technical indicators conform to China’s specified standard for papermaking physical inspection equipment.