Filter Results By:

Products

Applications

Manufacturers

Showing recent results 4801 - 4815 of 4866 products found.

  • Fineliner

    MicroContact AG

    The parallel tester Fineliner enables two-sided contact with fne structures. Withvisual detection of both substrate sides and corresponding adapter position correction≥ 300μm test points can be contacted. The rigid needle adapter with a pitch of ≥ 400μmalso allows a high contact density. This results in a large test depth on the substrate.The integrated DMC reader ensures a correct test result assignment. Multiple PCB canbe tested step by step through in the X-direction of the Fineliner, further eliminatingsubstrate tolerances in the X-direction, and enabling more cost-effective adapters andmeasurement techniques. A quick-release system with identifable replacement kitsensures safe and quick retooling.The measuring technology can be defned customer-specifcally. There are 2040 pyloninterface points per side.

  • Flightline Pilot Static Test Set

    ADTS-3350 Series - TestVonics, Inc.

    TestVonics™ ADTS-3350 Series Test Set is a portable, high precision, dual channel pitot static test system. This tester is designed to calibrate, test and troubleshoot air data instrumentation and aircraft pitot-static systems. The test set has been designed with functional and reliability features highly suited to withstand the harsh environmental and demanding conditions of the flight line environment, especially for military end users. The test set is designed for testing a wide range of commercial and military aircraft flight control systems, both rotary and fixed wing. The ADTS-3350 Series accuracy complies with standards for RVSM and is designed to replace the TTU-205 and other legacy test sets.

  • Moisture analyzer

    MOIST-41 - MRC ltd.

    Max Sample 18 samples (Inherent moisture)9 samples (total mo moisture)Sample Weight (0.9-1.1)g for moisture content on airdried basis; (10-12)g for total moistureFurnace Temperature 105C t0 110CTemp. Control Precision 3CAnalysis Time (20-40)minPower Requirement 220V(-15%-10%), 50HzMax Power 1.5kwSize / Net weight 542x506x564mm / 53kgStandard Layout Moisture Tester / Lenovo PC(Desktop) / PrinterISO117722 Solid mineral fuels Hard coal Determination ofmoisture in the general analysis test sample by drying innitrogen ASTM D5142-09 Standard Test Method forProximate Analysis of the Analysis Sample of CoalGB/T212-2008 Standard

  • QT 200NXT

    Qmax Test Technologies Pvt. Ltd.

    QT 200 NxT is a ultra modern stylish Inbuilt external controller ATE with touch screen features, is now available as a desktop unit with the cost, flexibility, and performance demanded by a large number of users in research, design, manufacturing, and repair & maintenance industry. It is a combinational-mixed signal board tester for PCBAs designed to cater the needs of PCB test and repair depots, keeping in mind the changing PCB technology and challenges in testing them offline with the combination of all such complex test methodologies in a single test hardware platform with simple to use graphical user interface software. The vast library support helps you to functionally test host of different IC families.

  • Rail Wheel Testing Using Phased Array System

    ECHOMAC® PA Wheel Tester - Magnetic Analysis Corp

    MAC introduces two versions of Rail Wheel Testers using ECHOMAC® PA platform based on customer requirements. One is a semi-automated solution using local immersion technique. Used for tread inspection of new and/or reprofiled wheels. This solution meets or exceeds EN13262, ISO5948 or AAR M-107/M-208 standards for tread inspection. The second solution is a fully automated immersion tank. Performs tread and face inspection of rail wheels using two phased array probes simultaneously. This solution meets or exceeds EN13262, ISO5948 or AAR M-107/M-208 standards for tread and face inspection, while monitoring the backwall on the face side per EN 13262.

  • Relay Buddy PRO Test Kit

    191 - Electronic Specialties Inc.

    Relay Buddy is a quick go / no-go tester for the most common automotive relays. With the included adapters, Relay Buddy now tests 5 different relay types and also tests shielded relays. Relay Buddy provides you with an indication of the general health and functioning of the relay switch contacts and coil. It will check the control side of the relay by applying a signal to the relay coil while it checks for proper functioning of the relay contacts. Relay Buddy operates the relay several times during each test session as it watches for consistency in every cycle. Relay Buddy will fail the relay and light the RED LED if any one of the cycles proves unsuccessful during the test session.

  • UDP Test Tool, Flood Generator, VoIP Readiness Test Tool

    StarTrinity.com

    The Multiprotocol Network Tester is a freeware, open source tool which enables you to measure quality of your IP network. It can also be used to generate UDP flood or to simulate UDP DoS attack. SIP call is usually established using a SIP session with a bidirectional RTP stream. SIP and RTP protocols are based on UDP transport protocol. UDP uses a simple transmission model without implicit reliability, ordering and data integrity. Each single UDP packet is transferred independently. The quality of a SIP call depends on delays and loss of IP packets in a network. Long delays lead to large RTP jitter and bad sound quality of a SIP call.

  • Manufacturing Defects Analyzer

    eloZ1-400 - elowerk Testsystems

    The eloZ1 Manufacturing Defects Analyzer is an in-circuit tester of the very latest generation, reliably detecting connection and assembly faults on printed circuit board assemblies. The eloZ1-400 is the compact version of the eloZ1. It is particularly suitable if there is only limited space to fit test appliances. The eloZ1-400 can also be used as a mobile test system.

  • Condensation Chamber

    Wewon Environmental Chambers Co, Ltd.

    The condensation test chamber does not need special installation conditions, just need to connect to the ordinary power supply and running water can be used normally. The functional diversity of the equipment, fast and low operating costs make the machine a very high cost performance condensation testing machine in the market. The machine can be programmed to control three different test effects: Humidification, natural cooling and drying, and the corresponding temperature and running time of each test, and set the total time of program running and the number of cycles. The condensation tester has an automatic water replenishing device. When the water temperature exceeds the upper limit, there will be a protection device for safety warning, and it is very safe to use.https://www.wewontech.com/condensation-chamber/

  • Custom Test System Solutions

    Astronics Corp.

    No time to think about test? One-size-fits-all testers not ideal? Existing solution no longer fits your needs? Then count on integrated test solutions from Astronics. We’ll assist you with your test strategy and your test system, setting you on the path to market at a pace and ROI that ensures your program success.Astronics helps you solve your toughest test challenges with a host of integrated test solutions for any high reliability application. With more than 55+ years of experience, we offer you customized solutions from a broad base of technologies and systems components to deliver your solution quickly, to your exact specifications, at any location worldwide.

  • Defect Isolation

    Teseda Corporation

    *Traverse through the physical design to trace nets and vias down to the defect location*Utilizes industry standard LEF/DEF design files, scan-based test information, tester fail logs and diagnostic reports to determine and isolate the physical defect location*Enables the user to leverage their diagnostic experience to determine the root cause of the defect*Interactive layout viewer displays scan chains, mapped mismatches of scan cells, layers, nets and subnets with search capabilities(component, net, cell)*Physical XY coordinates are always displayed for components and nets to guide the user through the design to quickly identify suspect sites for FA using techniques like Emission, OBIRCH, LIVA, TIVA, or FIB

  • LEON Fixture

    Konrad Technologies GmbH

    The KT LEON Fixture, is the ideal fixture solution for function test, final test and ICT applications. Our test system combines optimal ergonomics with high performance, durability, and precision, ensuring your investment over the long term. It is prepared for a safety switch with guard locking, and an electrical interlock. It’s hard-ware interface ensures minimal maintenance and retooling times. Our fixture technologies reduced debug time, ease ECO‘s and reduced maintenance, while allowing for the highest test performance, ability to probe denser smaller targets and achieve ultra-high node counts. As well as all testers of Leon Family the KT LEON Fixture is based on the multifunction card KT-PXI-501.

  • Probe Card PCB's

    Dynamic Test Solutions

    DTS offers both generic and custom PCBs blanks for probe cards. Probe card PCBs are available for all tester platforms and can be configured for any vertical technology, epoxy cantilever and legacy blade cards. DTS probe card blanks are made to precise specifications required for all probing technologies and are available in high speed and high temperature materials. All probe card PCBs employ a balanced layering construction to maintain tight flatness specifications and minimize warping, allowing good probe planarity. Gold plating on all surface metals facilitates easy soldering and minimizes probe resistance. DTS is continually adding new probe card blanks to its library!

  • Trend Tracker Software

    Data Collection - Electronic Systems of Wisconsin, Inc.

    ESW recognizes that our test systems provide vital information our customers need to control and understand their process. We have developed our Trend Tracker Software to aid customers with total process control of their line. This software is designed to use information that the tester is gathering on every part tested. Information from all parts tested are stored by part number or other designator. Trend Tracker screens are simple and easy to navigate using drop down menus for each test to select the desired test data to view on the graphs. Once a test is selected, the Test Readings Graph and Histogram are updated automatically. These graphs show a graphic representation of the readings obtained for the selected test.

  • Utility Card: Boundary Scan Applications

    Keysight Technologies

    With the Keysight utility card, you can integrate boundary scan plug-in solutions into the i3070 or 3070 testhead*.This new feature allows customers to leverage boundary scan solutions that have been developed at R&D and NPI stages into the manufacturing environment. This reduces engineering effort to redevelop tests. Using the boundary scan plug-in card on the Utility Card, the developed boundary scan test can be integrated into the ICT testplan quickly and easily to increase test coverage.* Customers who are currently using the existing i3070 or 3070 series of testers on software versions earlier than 08.00p can enjoy the full capabilities of the Series 5 utility card by upgrading their hardware and software. For more information, please contact us.

Get Help