Filter Results By:

Products

Applications

Manufacturers

Showing recent results 3691 - 3705 of 4805 products found.

  • Digital Macro Vickers Hardness Tester w/ Printer

    900-398 - Phase II Plus

    The 900-398 Vickers Hardness Tester is engineered to produce a clear indentation and a more precise measurement. By means of a load cell, closed circuit system for control, the CPU controls testing force to load/dwell/unload, allowing for the highest degree of accuracy. The large LCD shows the measuring methods, the testing force, the indentation length, hardness value, the dwell time of the testing force as well as the number of the measurement on its screen.

  • 8 CHANNELS ARINC 429 Simulator Analyzer Tester

    CIC429 - Andor Design Corp.

    The CIC429 is a full featured, high performance Serial bus Simulator Analyzer Tester developed by Andor Design for test and simulation of ARINC 429 or similar Avionic buses. The CIC429 is designed as a 5/8 size plug-in card for an ISA bus. An on board microprocessor off loads the host by organizing the data in a predefined structure in the dual port RAM. Pro­gramming the CIC429 consists of changing this data, which can be done on the fly for real time applications

  • 4 x 10 Gb/s Bit Error-Rate Tester

    CA9802 - UC Instruments, Corp.

    CA9802 is a high performance, easy to use, allinone, costeffective,4 x10 Gb/s Bit ErrorRate Tester(BERT) for current 40 GTOSA/ROSA components R&D and manufacturing environments as well as field installations. The CA9802 incorporates an internal reference clock, a pattern generator, clock recovery circuits, and a BER analyzer, in one compact modulethat provides both electrical and optical interfaces at data rates up to 11.9Gb/s. The CA9802 is offered with an RS232 or USB interface.

  • XGA 1024x768 Computer Monitor / Video Projector Tester

    VGA-SE10 - Data Sync Engineering

    This is the brand new, pocket sized, VGA-SE10 computer monitor tester designed for on-site testing and aligning of computer monitors and video projectors without the need of a computer. The VGA-SE10 provides 16 switch selectable display patterns at the 1024 x 768 video resolution commonly used with XGA projection systems. The VGA-SE10 will test for Bad Pixels, Color Wheel Operation, Blank Raster, Convergence, Linearity, Color Balance, Screen Alignment and Interconnecting Cable Quality.

  • COMPRESSION, VACUUM AND FUEL PUMP TESTER COMBO SET

    MCVK - Matco Tools

    *Tests compression on all domestic and import cars and trucks with gasoline engines*Compression tester kit includes: 2-1/2" gauge with dual inch/metric readings: 0-300 psi and 0 to 21 kg/cm2, 14mm/18mm solid short adapter, 14mm/18mm long flexible adapter and 14mm long reach adapter*Checks vacuum and fuel pump pressure and locates air leaks in fuel lines, vacuum operated chokes and emission control systems on all domestic and import cars and trucks with gasoline engines

  • 4 x 28 Gb/s Bit Error-Rate Tester

    CA9803 - UC Instruments, Corp.

    CA9803 is a high performance, easy to use, all‐in‐one,costeffective,  4 x 28 Gb/s Bit Error‐Rate Tester(BERT) for current 100 GTOSA/ROSA components R&D and manufacturing environments as well as field installations. The CA9803 incorporates an internal reference clock, a pattern generator, clock recovery circuits, and a BER analyzer, in one compact module that provides both electrical and optical interfaces at data rates up to 28 Gb/s. The CA9803 is offered with an RS‐232 or USB interface.

  • Digital 3 Phase Industrial Earth Leakage Tester

    6221 EL-M - Standard Electric Works Co., Ltd

    ● High contrast OLED display.● Designed for viewing in the dark, for mining industry.● Microprocessor-controlled.● Indicates phase rotation● Indicates phase presence● TEST for disconnection sensitivity● Battery status indicator● Measures Voltage Phase to Earth● Select one of 3 Phase to test ELCB.● Color-coded test leads.● Phase presence indication from as low as 100Vac.● Fused earth leakage tester.● ELCB works 50Vac to 330Vac 50Hz / 60Hz.● Phase rotation and presence does not require battery to indicate.

  • T8997 Air Leak Tester/Flow Tester ALL IN ONE

    ForTest Italia Srl

    A touch of innovationThe new T8997 leak tester was designed with the idea of combining two different types of measurement in a single instrument, making it suitable for leak tests and flow tests.The new video controller “ForTest MMI” brought a superior level of human-machine interaction, thanks to an innovative capacitive panel in tempered glass, around a splendid 6.2” colour display.Parameter programming is much faster thanks to the new numerical keyboard integrated in the menus, and the big display makes viewing even clearer of the test cycle.

  • 200 A Safety Ground Tester With Built-In Thermal Printer

    SGT-200 - Manta Test Systems

    The Vanguard SGT-200 Safety Ground Tester is a 200A DC micro-ohmmeter designed specifically to measure the resistance of protective in-service grounding and jumper cable assemblies. The SGT-200 can measure the resistance of the grounding cables, clamps and ferrules. The measured resistance values can be compared against the calculated values (using the ASTM 2249-03 standard) and a Pass/Fail result can be printed along with the measured resistance values. Since the SGT-200 uses a DC current, there is no need to uncoil the cable under test. It can be conveniently tested in its coiled state in a much smaller testing enviornment.

  • Simulator / Analyzer / Tester PCI BUS Interface Card

    CIC301 - MIL-STD-1553 - Andor Design Corp.

    The CIC301 is a full-featured, high performance, Dual Redundant MIL-STD-1553 A/B serial bus Simulator Analyzer Tester designed as a plug in card for PCI backplane. The CIC301 includes full error injection and can operate in indepen­dent or simultaneous mode as a Bus Controller, multiple simulated Remote Terminals and full/sele­ctive Monitor. Its data structure can be changed on the fly without interrupting the processor for real time operation. The active monitor stores, time tag and annotates bus traffic with the message type and any detected errors. Stored words are annotated with a break down of the word error.

  • Fully Automatic Diagnostic Insulation Tester 10KV- 10KPI

    The Motwane Manufacturing Company

    Model 10K PI is a diagnostic insulation tester having test voltage range upto 10KV; an Indigenous MOTWANE designed to conduct automatic diagnostic tests on high voltage equipments like Transformers, Cables, Bushings,Switchgears & rotating machines. 10K PI is microprocessor based instrument deploying latest technology & very high speed data sampling to give correct, repetitive readings & quality performance under harsh electrical conditions. It has wide insulation resistance range up to 20T ohm.Model 10K PI is mains and battery operated portable & compact insulation tester for outdoor applications. The battery backup of 6 hours make it suitable for field operations.IP54 rating keeps 10K PI safe from water & dustingress. It complies with CAT IV 600V for safe operation. The instruments & its accessories are certified as perrelevant IS/IEC standard.The Information displayed on large backlit LCD display includes insulation resistance, leakage current, capacitance,battery status & timer. Three programmable timers are provided to conduct various tests like Polarization Index (PI),Dielectric Absorption Ratio (DAR), Dielectric Discharge (DD), Step Voltage (SV), & breakdown Voltage (BDV) test.10K-PI can store 1000 test results. PC interface via USB & RS 232for data transfer. The software for report generation & data trending analysis helps to keep records of capital equipments.

  • International Wireless 6V/12V Battery and 12V/24V System Tester

    SBT1 - Schumacher Electric Corporation

    PERFORM BATTERY AND SYSTEM TESTS WIRELESSLY FROM YOUR SMARTPHONE OR TABLET.For 6V and 12V automotive batteries (SS EFB and AGM included) and 12V/24V charging/starting systemsEasy and fast Bluetooth® pairing Works with SBT1 SchulinkTM app, which includes eight language settings.Performs Battery Test, System Test, Start-Stop Test and EV Battery Test Email or text test results – stores 2,000 test records Test batteries with as little as 1.5V3 LED indicators (Blue: Connected, Green: Power, Red: Trouble)On/Off button20-inch cable with durable clamps3.7V rechargeable internal lithium ion batteryContents: (1) SBT1 tester (1) Manual

  • Embedded Tester - Test Automation Framework for hardware and software

    Xebrium

    Embedded Tester (ET) is a test automation system designed for stress testing of hardware and software algorithms. It is a generic automated testing multi-user framework comprising of hardware and software which allows generation and monitoring of signals and patterns. The product encompasses distinguished software and hardware components which can help in creating, automatically executing and evaluating various test cases. A very common challenge in the development and testing of Embedded products is to create a real world environment of signals and patterns to thoroughly test the product in repeatable and trackable way. ET addresses this problem by generating and monitoring signals and patterns supported by sophisticated test harness that quantifies the quality assurance coverage. ET offers a comprehensive set of historical data for all testing activities. It helps in the product engineering efforts of the teams by substantially focusing on quality processes and their automation.

  • ±6 kV ANSI/ESDA/JEDEC 2-Pin HBM Tester

    HBM-S1-B - High Power Pulse Instruments GmbH

    *±6 kV Human-Body-Model (HBM) 2-pin tester according ANSI/ESDA/JEDEC JS-001 standard with C = 100 pF, R = 1.5 kΩ discharge network*True HBM: the classical discharge network of the HBM-S1-A according the standard ensures compliant waveforms for all load conditions*Optionally available upgrade for all HPPI TLP-3010C, 4010C, 8010A, and 8010C hardware systems and software (upgrade on request)*Suppression of trailing pulses*Integrated 10 kΩ charge removal resistor*Integrated DUT voltage and DUT current sensor for real time voltage and current monitoring*Integrated DC test DUT switchIntegrated hardware 50 Ω trigger output for high speed digital oscilloscopesIntegrated overvoltage protection of voltage sense and DC test interfaces for oscilloscope and SMU protection during high voltage HBM testing*Fast and efficient HBM measurements including transient waveform data management using the HPPI TLP software*Compact size 145 mm x 82.5 mm x 44 mm

  • USB Power Delivery and Type-C™ Tester & Analyzer

    GRL-USB-PD-C2 (GRL-C2) - Granite River Labs Inc.

    GRL-USB-PD-C2 (GRL-C2) is the only solution available that supports all compliance test specifications for USB Power Delivery 3.0 and USB Type-C Alternate Mode designs, and enables product developers to quickly run full compliance and validation test suites at the push of a button. GRL-C2 provides an automated, efficient, and fully-integrated way perform all required USB Power Delivery version 3.0 and 2.0 and related tests over the USB Type-C connector, as well as PHY test automation for USB Type-C Alternate Modes. GRL-C2 automates all required USB PD compliance tests for power providers (chargers), consumers, dual-role ports, and cable and adapter E-Markers; and is the only solution available that integrates Qualcomm Quick Charge 4+ and Intel Thunderbolt-specific test items. GRL-C2 also incorporates analyzer capability to sniff PD traffic. GRL-C2 integrates all required USB PD tests into a single 2-port tester, including all tests supported on GRL’s USB-IF approved first generation solution introduced in 2015. Each port can be configured independently as a PD Provider or Consumer. All other PD Protocol and Power tests are fully integrated, removing the need for external electronic loads.