Filter Results By:

Products

Applications

Manufacturers

Test Scripting

are a sequence of executable instructions automating testing.


Showing product results. 1 - 15 of 16 products found.

  • AI driven, Unified Software Test Automation System

    Appvance IQ - Appvance

    Appvance IQ delivers transformational productivity gains in both test creation and execution, the former through AI scripting and codeless test creation, the latter through unified functional, performance and security testing. Appvance IQ is easy to adopt, in part because it runs native scripts from other automation and easily connects to DevOps tooling.

  • Universal Scan 9.4f

    Universal Scan

    Provides a simple and inexpensive debug technique where you can monitor and control the pins on JTAG enabled devices from your PC in real time without having to setup test vectors, test executives, CAD data, etc. Includes; Debugging - Scripting - Chain testing - BSDL Validation - Package Builder - SPI Flash Programmer - Parallel Flash Programming

  • WAN Simulator / Emulator

    LANforge ICE - Candela Technologies Inc.

    LANforge ICE emulates networks that involve limited bandwidth, latency, packet loss, and corruption. LANforge ICE tests the behaviour of devices that sit on either side of an impaired network. Reduces lab and training costs by replacing expensive WAN hardware, such as T1 and FrameRelay devices. Automates testing with various scripting features and libraries.

  • 10Gbps Ethernet Tester

    APG 8 - Axtrinet

    Full wire rate packet generator and capture. 8 x Full wire-speed 10Gbps/1Gbps ports. 8x user configurable independent streams per port. Packet transmit rate control (IPG, packets/sec, %) up to line rate. Transmit burst control (single, multiburst, continuous). Easy to use Graphical User Interface plus scripting for integration into automated test systems. Automated RFC testing.

  • Functional Testing Solution

    Corelis

    Detecting faults early with accurate diagnostics is key to maintaining a high quality, rapid production line. The versatility of boundary-scan allows signals to be controlled and observed independently of the system logic, for quick and easy functional testing of logic components as soon as the system can be powered upno additional software required. Tests for logic clusters can be created using simple data vectors, or a powerful C-based scripting language can be used for advanced sequences.

  • 10Gbps Ethernet Tester

    APG 4 - Axtrinet

    Full wire rate Packet Generator and Capture. 4 x Full wire-speed 10Gbps/1Gbps ports SFP+ / SFP supported. 8 x user configurable independent streams per port. Packet transmit rate control (IPG, packets/sec, %) up to line rate. Transmit burst control (single, multiburst, continuous). Easy to use Graphical User Interface plus scripting for integration into automated test systems. Automated RFC testing.

  • 40Gbps Ethernet Tester

    APG208 - Axtrinet

    Full wire rate Ethernet Packet Generator with Capture. 2 x 40GbE QSFP+ & Direct Attach Cables supported. 8 x 10GbE SFP+, 1GbE SFP & Direct Attach (also supports 10GBase-T SFP+ & 10/100/1000Base-T ). 8 x user configurable independent streams per port. Packet transmit rate control (IPG, packets/sec, %) up to line rate. Transmit burst control (single, multiburst, continuous). Easy to use Graphical User Interface plus scripting for integration into automated test systems. Automated RFC testing.

  • Powered Device Analyzer for IEEE 802.3at PoE PD Analysis

    PDA-602B - Sifos Technologies, Inc.

    Emulate all Type-1 and Type-2 PSE’s, powering 2-pairs upt to 41W at all PD input voltages. Optionally supports 802.3at PD Conformance Test Suite and LLDP emulations. Key features include:• Scaleable PSE and Cable Plant Emulations• Optional Automated PD Conformance Test Suite(s)• Optional Automated Load Monitor Assesses Average, Peak, Tcut Window, and MPS Power Compliances• Accurate Metering: Voltage, Current, Power Sampling at PD Interface• 10/100/1000Base-T Switched Network Interface for Remote PD Control• USB Interface for Plug'n Play Instrument Control• PDA Interactive Graphical User Interface• PowerShell PDA Interactive Scripting Environment• Binary API (DLL) for Integration to other Programming Environments• Extensive Reference Documentation• Compliance Tested for Safety and Emissions

  • DDR4 Compliance Test Bench

    W2351EP - Keysight Technologies

    The W2351EP DDR4 Compliance Test Bench helps solve the problem of simulation-measurement correlation. In the past, the pre-manufacture design could be simulated and tested using compliance tools from an EDA vendor. And the post-manufacture prototype could be bench tested using compliance tools from test and measurement instrument vendors. However, because of subtle differences between the two vendors independent approaches to compliance, it was almost impossible to correlate the two. This opened the possibility of the pre-manufacture design passing and the post-manufacture prototype failing, necessitating a time-consuming and expensive design spin. In contrast, DDR4 Compliance Test Bench leverages the exact same industry-leading Compliance App used on Keysight Infiniium oscilloscopes. It mimics a real hardware test bench, and, using a scripting technology called "Waveform Bridge," emits the same waveforms that the Infiniium app receives when you are testing in your lab. Thus, the exact same tests no ifs, ands, or buts -- are applied to both the pre-manufacture simulated design and the actual post-manufacture prototype.

  • USB Compliance Test Bench

    W2353EP - Keysight Technologies

    The W2353EPUSBCompliance Test Bench helps solve the problem of simulation-measurement correlation. In the past, the pre-manufacture design could be simulated and tested using compliance tools from an EDA vendor. And the post-manufacture prototype could be bench tested using compliance tools from test and measurement instrument vendors. However, because of subtle differences between the two vendors independent approaches to compliance, it was almost impossible to correlate the two. This opened the possibility of the pre-manufacture design passing and the post-manufacture prototype failing, necessitating a time-consuming and expensive design spin. In contrast, USB Compliance Test Bench leverages the exact same industry-leading Compliance App used on Keysight Infiniium oscilloscopes. It mimics a real hardware test bench, and, using a scripting technology called "Waveform Bridge," emits the same waveforms that the Infiniium app receives when you are testing in your lab. Thus, the exact same tests no ifs, ands, or buts -- are applied to both the pre-manufacture simulated design and the actual post-manufacture prototype.

  • DDR3 Compliance Test Bench

    W2350EP - Keysight Technologies

    The W2350EP DDR3 Compliance Test Bench helps solve the problem of simulation-measurement correlation. In the past, the pre-manufacture design could be simulated and tested using compliance tools from an EDA vendor. And the post-manufacture prototype could be bench tested using compliance tools from test and measurement instrument vendors.However, because of subtle differences between the two vendors independent approaches to compliance, it was almost impossible to correlate the two. This opened the possibility of the pre-manufacture design passing and the post-manufacture prototype failing, necessitating a time-consuming and expensive design spin. In contrast, DDR3 Compliance Test Bench leverages the exact same industry-leading Compliance App used on Keysight Infiniium oscilloscopes. It mimics a real hardware test bench, and, using a scripting technology called "Waveform Bridge," emits the same waveforms that the Infiniium app receives when you are testing in your lab. Thus, the exact same tests no ifs, ands, or buts -- are applied to both the pre-manufacture simulated design and the actual post-manufacture prototype. DDR3 Compliance Test Bench supports not only DDR3 but also LPDDR3.

  • Powered Device Analyzer for IEEE 802.3bt / 802.3at PoE PD Analysis

    PDA-604A - Sifos Technologies, Inc.

    The One-Box solution for 802.3 PD verification including flexible emulation of PSE behaviors, scaleable feature configurations, and plug ’n’ play testing using a Windows PC. Key features include:• Scaleable PSE and Cable Plant Emulations• Optional Automated PD Conformance Test Suite(s)• Optional Automated Load Monitor Assesses Average, Peak, Tcut Window, and MPS Power Compliances• Accurate Metering: Voltage, Current, Power Sampling at PD Interface• 10/100/1000Base-T Switched Network Interface for Remote PD Control• USB Interface for Plug'n Play Instrument Control• PDA Interactive Graphical User Interface• PowerShell PDA Interactive Scripting Environment• Binary API (DLL) for Integration to other Programming Environments• Extensive Reference Documentation• Compliance Tested for Safety and Emissions

  • Multi-Interface TDM, Optical, And Packet/IP Rackmount & Probe Test Platforms

    mTOP™ - GL Communications Inc.

    Most equipment manufacturers and large enterprises prefer rack-based test tools as they are compact and higher density form factor solution for testing, monitoring, and troubleshooting network conditions. GL’s Multiple TDM Optical and Packet (mTOP™) rack enclosure can house any combination of USB based test equipment which are easily deployed and securely fixed to an equipment rack to provide extraordinary scalability to test switches, routers and end-to-end networks. These rack based platforms incorporates the basic test unit along with the necessary PC hardware, Windows® 10 64-bit operating system and remote accessibility via scripting and remote desktop. There are no moving parts with the unit, so reliability and longevity are integral. GL’s latest mTOP™ Probe stand-alone hardware variant is an all-in-one self-contained test instrument. The mTOP™ Probe can include any of the multiple TDM Optical and Packet interfaces USB device combined with the PC into one single box. The comprehensive mTOP™ Probe hardware unit is designed for easier portability and convenient for field testing which incorporates the testing features for multiple interfaces along with necessary PC hardware in a single box. GL’s USB based test equipment - PacketExpert™ (Ethernet), tProbe™ (T1/E1), USB T3/E3 (TDM), Dual UTAs (Analog/Wireless), and LightSpeed1000™ (SONET SDH) to support multiple interfaces in a compact rack space or included in a portable Probe unit.

  • Rack Based Test Solutions

    GL Communications Inc.

    Most equipment manufacturers and large enterprises prefer rack-based test tools as they are compact and higher density form factor solution for testing, monitoring, and troubleshooting network conditions. GL’s Multiple TDM Optical and Packet (mTOP™) rack enclosure can house any combination of USB based test equipment which are easily deployed and securely fixed to an equipment rack to provide extraordinary scalability to test switches, routers and end-to-end networks. These rack based platforms incorporates the basic test unit along with the necessary PC hardware, Windows® 10 64-bit operating system and remote accessibility via scripting and remote desktop. There are no moving parts with the unit, so reliability and longevity are integral. GL’s latest mTOP™ Probe stand-alone hardware variant is an all-in-one self-contained test instrument. The mTOP™ Probe can include any of the multiple TDM Optical and Packet interfaces USB device combined with the PC into one single box. The comprehensive mTOP™ Probe hardware unit is designed for easier portability and convenient for field testing which incorporates the testing features for multiple interfaces along with necessary PC hardware in a single box. GL’s USB based test equipment - PacketExpert™ (Ethernet), tProbe™ (T1/E1), USB T3/E3 (TDM), Dual UTAs (Analog/Wireless), and LightSpeed1000™ (SONET SDH) to support multiple interfaces in a compact rack space or included in a portable Probe unit.

Get Help