Filter Results By:

Products

Applications

Manufacturers

Showing recent results 616 - 630 of 1038 products found.

  • CAS Modbus Scanner

    Chipkin Automation Systems

    CAS Modbus Scanner is a utility to retrieve coils, inputs, holding registers, and input registers from a Modbus enabled device. Values retrieved from the device can be viewed in many different formats including Binary, HEX, Uint16, Int16, Uint32, Int32, and Float32. This utility can also discover Modbus devices on your network if you do not know their address. It works by testing every address, function, length, offset to check for exceptions or responses.

  • Coaxial Fixed Attenuator, DC to 12.4 GHz

    8491A - Keysight Technologies

    The Keysight 8491A coaxial fixed attenuator provides precision attenuation, flat frequency response and low SWR over broad frequency ranges. The attenuator has type-N connectors and is available in nominal attenuations of 3 dB and 6 dB, as well as 10 dB increments from 10 dB to 60 dB. This attenuator is swept-frequency tested to ensure specification compliance at all frequencies. Calibration points are provided on a nameplate chart attached to each unit.

  • Coaxial Fixed Attenuator, DC to 12.4 GHz

    8493A - Keysight Technologies

    The Keysight 8493A coaxial fixed attenuator provides precision attenuation, flat frequency response, low SWR over broad frequency range at a low price. The attenuator is available in nominal attenuations of 3 dB and 6 dB, also 10 dB increments from 10 dB to 30 dB. This attenuator is swept-frequency tested to ensure it meets specifications at all frequencies. Calibration points are provided on a nameplate chart attached to each unit.

  • Coaxial Fixed Attenuator, DC to 18 GHz

    8493B - Keysight Technologies

    The Keysight 8493B coaxial fixed attenuator provides precision attenuation, flat frequency response, low SWR over broad frequency range at a low price. The attenuator is available in nominal attenuations of 3 dB and 6 dB, also 10 dB increments from 10 dB to 30 dB. This attenuator is swept-frequency tested to ensure it meets specifications at all frequencies. Calibration points are provided on a nameplate chart attached to each unit.

  • Coaxial Fixed Attenuator, DC to 50 GHz

    8490D - Keysight Technologies

    The Keysight 8490D coaxial fixed attenuator provides precision attenuation, flat frequency response, low SWR over broad frequency range at a low price. The attenuator is available in nominal attenuations of 3 dB and 6 dB, also 10 dB increments from 10 dB to 40 dB. This attenuator is swept-frequency tested to ensure they meet specifications at all frequencies. Calibration points are provided on a nameplate chart attached to each unit.

  • Electrochemical Workstations

    ZAHNER-Elektrik

    Besides a potentiostat / galvanostat all our electrochemical workstations include also a frequency response analyzer unit (FRA) in their basic configuration. This makes each of our electrochemical workstations a highly versatile basis equipment for a multitude of electrochemical investigation methods on batteries, accumulators and fuel cells as well as on high impedance objects such as coatings and laminates. Due to their hardware extensions slots our instruments can be extended to multi purpose data acquisition and control test stands.

  • HUMICAP Sensor

    HM-34 - Dry Air Technology

    Ideal for spot checking humidity levels Measurement range 0...100 %RH Fast response with +/-2% accuracy Temperature measurement range -20...+60 C (-4...+140 F) Lightweight, pocket-sized Extendable probe Automatic POWER-OFF Available in either F or C NIST traceable (certificate included) Incorporatess Vaisala HUMICAP Sensor that provides high accuracy, excellent long-term stability, neglible hysteresis, and insensitivity to dust and most chemicals

  • Land Mobile Radio

    Anritsu Corporation

    Land Mobile Radio systems are commonly used for critical communications by public safety organizations such as police, firefighters, and other emergency response organizations. In addition to the public safety sector, LMR systems are also commonly used in the commercial world in various industries including industrial, transportation, utilities, security, and logistics. LMR systems typically consist of handheld portable radios, vehicle mounted mobile radios, fixed base stations and repeaters, and network infrastructure.

  • Materials Measurement Suite

    N1500A - Keysight Technologies

    With Keysight N1500A materials measurement software suite, you can determine the intrinsic electromagnetic properties of many dielectric and magnetic materials. The complete system is based on a versatile Keysight network analyzer which measures the material’s response to RF or microwave energy. The N1500A software controls the network analyzer and calculates results. Depending on the Keysight network analyzer and sample holder or fixture used, frequencies can extend from a few hundred MHz into the low THz.

  • NEAR IR IMAGE PLATES

    Macken Instruments, Inc

    The IR Display Plate is a versatile instrument that presents clear, high contrast images of all near IR laser beams. These displays are made on infrared sensitive phosphors which offer a variety of unique features, variable image retention times for pulsed lasers, high resolution for CW YAG, and a good response to gallium arsenide light-emitting diodes. All near IR lasers are capable of being displayed over a wide sensitivity range.

  • PCI High Density Potentiometer

    50-296-XXX - Digital Communication Technologies Ltd

    The 50-296 is a Programmable Potentiometer module with up to 9-channels of 8-bit resolution potentiometers in a single PCI card. The flexible architecture allows the card to also be supplied as 12-bit, 16-bit or 24-bit resolution versions for applications requiring finer resolution, greater resistance range or higher channel count. The card is ideal for simulating the sensors for control and management systems under test, allowing the user to verify system response in design verification or manufacturing test applications.

  • PCI High Density Resistor Card

    50-295-XXX - Digital Communication Technologies Ltd

    The 50-295 is a Programmable Resistor module with up to 18-channels of 8-bit resolution resistor chains in a single PCI card. The flexible architecture allows the card to also be supplied as 12-bit, 16-bit or 24-bit resolution versions for applications requiring finer resolution, greater resistance range or higher channel count. The card is ideal for simulating the sensors for control and management systems under test, allowing the user to verify system response in design verification or manufacturing test applications.

  • PCI High Density Resistor Card 10-Channel, 12-Bit, 0 To 4k Ohm

    50-295A-121-10/12 - Pickering Interfaces Ltd.

    The 50-295A is a Programmable Resistor card with up to 18-channels of 8-bit resolution resistor chains in a single PCI slot. The flexible architecture allows the card to also be supplied as 12-bit, 16-bit or 24-bit resolution versions for applications requiring finer resolution, greater resistance range or higher channel count. The card is ideal for simulating the sensors for control and management systems under test, allowing the user to verify system response in design verification or manufacturing test applications.

  • PCI High Density Resistor Card 10-Channel, 16-Bit, 0 To 65k Ohm

    50-295A-121-10/16 - Pickering Interfaces Ltd.

    The 50-295A is a Programmable Resistor card with up to 18-channels of 8-bit resolution resistor chains in a single PCI slot. The flexible architecture allows the card to also be supplied as 12-bit, 16-bit or 24-bit resolution versions for applications requiring finer resolution, greater resistance range or higher channel count. The card is ideal for simulating the sensors for control and management systems under test, allowing the user to verify system response in design verification or manufacturing test applications.

  • PCI High Density Resistor Card 10-Channel, 8-Bit, 0 To 255 Ohm

    50-295A-021-10/8 - Pickering Interfaces Ltd.

    The 50-295A is a Programmable Resistor card with up to 18-channels of 8-bit resolution resistor chains in a single PCI slot. The flexible architecture allows the card to also be supplied as 12-bit, 16-bit or 24-bit resolution versions for applications requiring finer resolution, greater resistance range or higher channel count. The card is ideal for simulating the sensors for control and management systems under test, allowing the user to verify system response in design verification or manufacturing test applications.