Showing recent results 196 - 210 of 262 products found.
-
U2043XA - Keysight Technologies
Accurately measure any modulated signal with the Keysight Technologies, Inc. U2040 X-Series wide dynamic range power sensors. The USB connectivity models come with world's widest dynamic range, covering -70 to +26 dBm. This sensor offers very accurate and repeatable power measurements for any modulated signal and comes with super-fast measurement speed of 50,000 readings/sec, which enables higher manufacturing throughput. Users can also save time and reduce measurement uncertainty with the internal zero and calibration function. The U2040 X-Series is supported by the Keysight BenchVue software. BenchVue makes it easy to control your power meter to log data and visualize measurements in a wide array of display options without any programming. Simply connect the sensor to your PC installed BenchVue BV0007B Power Meter/Sensor Control and Analysis app to perform average power measurement and analysis.
-
U2041XA - Keysight Technologies
Accurately measure any modulated signal with the Keysight Technologies, Inc. U2040 X-Series wide dynamic range power sensors. The USB connectivity models come with world's widest dynamic range, covering -70 to +26 dBm. This sensor offers very accurate and repeatable power measurements for any modulated signal and comes with super-fast measurement speed of 50,000 readings/sec, which enables higher manufacturing throughput. Users can also save time and reduce measurement uncertainty with the internal zero and calibration function. The U2040 X-Series is supported by the Keysight BenchVue software. BenchVue makes it easy to control your power meter to log data and visualize measurements in a wide array of display options without any programming. Simply connect the sensor to your PC installed BenchVue BV0007B Power Meter/Sensor Control and Analysis app to perform average power measurement and analysis.
-
K- AN8 KIT - Influx Technology LTD
This K-AN8 (8 analog + 4 digital input) kit contains everything needed to get the K-AN8 set up and tested on a work bench.To help with connecting sensors to the analog and digital ports the K-BoB enables easy connection with BNC connectors.Influx K-Cal is easily connected via the Kvaser LeafLight interface and Kvaser T-CANnector. (Using the Kvaser T-CANnector to power up the K-AN8 (at the desk) and terminate the CAN bus).
-
SLEDS - AMS Technologies AG
A variant of the LED, superluminescent LEDS (or SLEDs) provide the usual broadband, quasi-directional and low temporal coherence light emission common to the ubiquitous LED, but with the added benefit of higher optical power and greater spatial coherence. These properties make SLEDs the better option for numerous applications including telecom, instrumentation, optical coherence tomography (OCT), structual sensors and fiber optic gyroscopes that require this type of broadband source.
-
LiMOS - HIGHVOLT Prüftechnik Dresden GmbH
The transformer loss measuring system LiMOS is designed for highly accurate measurement of losses and other parameters required in the framework of routine and type testing of power transformers. The combined voltage/current sensors and the digital signal processing enable a very compact design with only one HV device per phase with smallest volume and footprint. The digitized and preprocessed signals are transmitted via fiber optic cable to the receiver unit (LiMO-MCSU).
-
IT6900A Series - I-TECH Electronic Co., Ltd
IT6900A series wide range programmable power supply have built-in standard RS232, USB, GPIB, RS485 and analog interface (RS485 and analog interface are just for IT6900B), support SCPI protocol, facilitate remote control, industrial PLC control and the formation of intelligent test platform. Remote compensation terminals avoid the problem of inaccurate testing caused by voltage drop on the wire.Low ripple, low noise and built-in digital voltmeter make IT6900A easy to do external measurement.IT6900A can be widely applied in DC-DC power supply module, battery charging and sensors and other test areas.
-
T3610 - COMET SYSTEM, s.r.o.
PoE Web Sensor with built-in relative humidity and temperature sensors. High precision capacitive polymer sensor ensures excellent long term calibration stability and ultimate accuracy. Dual line LCD is an advantage. Power over Ethernet feature according IEEE 802.3af is supported. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio and specific enthalpy.
-
DesignWare® - Synopsys, Inc.
Synopsys’ DesignWare® MIPI I3C Controller IP is compliant with the latest I3C specification and delivers high bandwidth and scalability for integration of multiple sensors into mobile, automotive and IoT system-on-chips (SoCs). The support for in-band interrupts within the 2-wire interface provides significantly lower pin count, simplifying board design and reducing power and cost. The IP is backward compatible with I2C, allowing designers to future proof their design, and the master and slave operating modes enable systems with several ICs to efficiently connect to all sensors on a single I3C bus. The standard-based ARM® AMBA® Advanced Peripheral Bus (APB) connects the IP to the rest of the SoC while the bus is connected to the register interface and the Direct Memory Access (DMA) interface, offering easy IP integration.
-
FSI-RM - Optilab, LLC.
The Optilab FSI-RM Fiber Bragg Grating (FBG) Sensor Interrogator is designed for numerous indoor, single 1U applications. The FSI-RM is a fully-integrated, high-resolution measurement system, features a high power, high speed swept wavelength laser, state-of-art embedded system for signal processing. The FSI-RM interrogator core employs advanced hardware peak detection, optimized for rapid data processing of many simultaneous FBG sensors. The FSI-RM is focused on providing measurements with higher acquisition rates, moderate dynamic range and continuous lifetime on-board referencing. The combination of high speed and excellent repeatability enables a single FSI-RM to simultaneously monitor dynamic sensors. The FSI-RM responds directly to the user commands and output sensor wavelength data via Ethernet port and our standard protocol.
-
U2042XA - Keysight Technologies
Accurately measure any modulated signal with the Keysight Technologies, Inc. U2040 X-Series wide dynamic range power sensors. The USB connectivity models come with world's widest dynamic range, covering -70 to +26 dBm. This sensor offers very accurate and repeatable power measurements for any modulated signal and comes with super-fast measurement speed of 50,000 readings/sec, which enables higher manufacturing throughput. Users can also save time and reduce measurement uncertainty with the internal zero and calibration function. The U2040 X-Series is supported by the Keysight BenchVue software. BenchVue makes it easy to control your power meter to log data and visualize measurements in a wide array of display options without any programming. Simply connect the sensor to your PC installed BenchVue BV0007B Power Meter/Sensor Control and Analysis app to perform complex pulse analysis and standard average power measurement.
-
M9406A - Keysight Technologies
Designed to complement the M9403A and M9404A Optical Link, the M9406A and M9407A is a fully compliant USB 2.0 Hub. The optically extended USB ports enable remote operation and utilize USB devices at the remote end of the optical link. Devices such as USB keyboards, mouse, USB video adapter for a remote monitor can be used for remote control. USB power sensors as well as E-Cal modules can be used to set up measurements. Remote extension of USB devices such as;
-
M9407A - Keysight Technologies
Designed to complement the M9403A and M9404A Optical Link, the M9406A and M9407A is a fully compliant USB 2.0 Hub. The optically extended USB ports enable remote operation and utilize USB devices at the remote end of the optical link. Devices such as USB keyboards, mouse, USB video adapter for a remote monitor can be used for remote control. USB power sensors as well as E-Cal modules can be used to set up measurements. Remote extension of USB devices such as;
-
TaperCamD series - DataRay Inc.
355 to 1150 nm, standard CCD detectorHyperCal Dynamic Noise and Baseline Correction software (Pat. Pending)CTE Comet Tail Elimination for > 900 nm (Pat. Pending)Port-powered USB 2.0; flexible 3 m cable, no power brick14-bit ADC, 4 MB image buffer & on-board microprocessorWindow-free sensors standard for no fringing25,000:1 electronic auto-shutter, 40 s to 1000 ms1,000:1 SNR (30/60 dB Optical/Electrical)
-
ViTec Co. Ltd
The measuring system consists of a test site and a control rack. The test site is equipped with a mounting for the test tool with measuring sensors: vibration, torque and speed, as well as a pneumatic regulator, a filter and a powder type brake clutch. The maximum torque test is performed until the rotation is completely stopped. The screen displays both the directly measured maximum torque and the calculated maximum power of this sample. At the end of the test, the results are presented to the operator on the monitor screen.
-
U30 Series - Onset Computer Corporation
HOBO U30 data loggers enable real-time, remote access to your data via cellular, Wi-Fi, or Ethernet communications, with a direct USB option also available. They can be configured with a wide range of external sensors for measuring weather conditions outdoors, and energy, power, and environmental conditions indoors. These U30 data logging systems have been designed with an industrial-grade and double-weatherproof enclosure to ensure years of reliable operation in a variety of indoor and outdoor environments.
