Filter Results By:

Products

Applications

Manufacturers

Instruments

read precision values.

See Also: Instrument Cables, Instrumentation Amplifiers


Showing recent results 3766 - 3780 of 4259 products found.

  • PXI Analog Output Module

    PXI-6733 / 778512-01 - NI

    16-Bit, 8-Channel, 1 MS/s PXI Analog Output Module—The PXI‑6733 is a high-speed analog output device designed to deliver simultaneous, multichannel updates for control and waveform output applications, such as stimulus-response tests (including acoustic distortion testing) and simulation (such as three-phase power simulation). In addition, the device provides eight 5 V TTL/CMOS digital I/O lines; two 24‑bit, 20 MHz counter/timers; and digital triggering and external clocking capabilities. The PXI‑6733 can replace several kinds of instruments, including stand-alone proportional integral derivative (PID) controllers, low-speed arbitrary waveform generators, and function generators. You can control each data point for each channel to define common waveforms, such as square, sine, or sawtooth, as well as complex waveforms.

  • PXI Multiplexer Switch Module

    NI

    PXI Multiplexer Switch Modules are ideal for high-channel-count applications that need to connect measurement or signal generation instruments to various test points on devices or units under test(DUTs or UUTs). PXI Multiplexer Switch Modules use a variety of relay types, including electromechanical armature relays, reed relays, field-effect transistor(FET) relays, and solid-state relays, each with their own benefits, allowing you to choose a multiplexer that fits your requirements. To program the switches, you can use the IVI-compliant NI-SWITCH driver software, complete with help documentation, example programs, and a soft front panel application for interactive control of switches. For intelligent management of complex switch systems, NISwitch Executive provides additional software tools to help you design, build, and deploy your switching system.

  • PXI RF Multiplexer Switch Module

    NI

    PXI RF Multiplexer Switch Modules are ideal for high-channel-count applications that need to connect measurement or signal generation instruments to various test points on devices or units under test(DUTs or UUTs). PXI RF Multiplexer Switch Modules use a variety of relay types, including electromechanical armature relays, reed relays, field-effect transistor(FET) relays, and solid-state relays, each with their own benefits, allowing you to choose a multiplexer that fits your requirements. To program the switches, you can use the IVI-compliant NI-SWITCH driver software, complete with help documentation, example programs, and a soft front panel application for interactive control of switches. For intelligent management of complex switch systems, NISwitch Executive provides additional software tools to help you design, build, and deploy your switching system.

  • Spectrophotocolorimeter

    HSP5000 - Hangzhou hopoo optoelectronics technology Co., Ltd

    Measure and display the relative spectral power distribution(UV-UIS-NIR)P(λ), chromaticity coordinate, correlated color temperature, rending index, color difference, peak wavelength, luminous flux, luminous flux efficiency and photometry parameter of light source and light material under the control of general PC. Fast auto adjustment which is not only shortens the measure time, but also makes the instrument more wear and tear. Measure the temperature both in environment and integrating sphere simultaneously to make the data more visually and reliably. The chromaticity diagram and color difference diagram can transform to each other in the test report; the spectrum distribution diagram can display and print by color and monochrome way; English-Chinese software and test report; RS-232-C interface which is more convenient to connect with PC.

  • Spectrophotocolorimeter Analyzer

    HSP6000 - Hangzhou hopoo optoelectronics technology Co., Ltd

    Measure and display the relative spectral power distribution (UV-UIS-NIR) P(λ), chromaticity coordinate, correlated color temperature, rending index, color difference, peak wavelength, luminous flux, luminous flux efficiency and photometry parameter of light source and light material under the control of general PC. Fast auto adjustment which is not only shortens the measure time, but also makes the instrument more wear and tear. Measure the temperature both in environment and integrating sphere simultaneously to make the data more visually and reliably. The chromaticity diagram and color difference diagram can transform to each other in the test report; the spectrum distribution diagram can display and print by color and monochrome way; English-Chinese software and test report; RS-232-C interface which is more convenient to connect with PC.

  • TDR Cable Analyzer

    CT100B - MOHR Test and Measurement llc

    The CT100B is special for two reasons: (1) It is the industry''s only high-resolution portable TDR providing step TDR impedance waveforms with resolution sufficient to show connector detail (~1 cm), and (2) it is the industry''s first portable TDR capable of making frequency domain S-parameter measurements including return loss (S11) and cable loss / insertion loss (S21). "High resolution TDR is extremely useful for detecting and localizing cable faults and characterizing cable and connector performance, but historically, portable TDRs have been unable to display OSL-calibrated S-parameter measurements," said Brandt Mohr, MOHR chief technologist. "The CT100B includes that capability, making it a very versatile instrument. If you can only carry one cable tester out into the field with you, it should be the CT100B."

  • Temperature Forcing System

    Wewon Environmental Chambers Co, Ltd.

    Wewon Technology specializes in the research, development, production and sales of laboratory testing equipment system services. Through more than ten years of accumulation in the field of equipment, the business of wewon Tech is mainly divided into three fields, namely optical communication, automobile and new energy industry.Specialized equipment from Wewon Environmental Chambers Co., Ltd. includes thermal stream instrument, environmental chambers, walk in chamber, salt fog test chamber, vibration testing machine, xenon lamp aging tester, ultraviolet weather testing equipment, tensile testing machine and various IP protection level test equipment. The system characteristic of Wewon Tech thermal stream temperature test system as below technical parameters mentioned.https://www.wewontech.com/temperature-forcing-system/

  • Trace-Level UV Fluorescence SO2 Analyzer

    Model T100U - Teledyne Advanced Pollution Instrumentation

    The Model T100U Trace-level SO2 analyzer has been developed specifically to address the challenges of low level monitoring as required, for example, in the US NCore network. It uses the proven UV fluorescence principle, and is designed to allow ultra-sensitive SO2 measurements while still meeting the requirements for use as a US EPA compliance analyzer.The analyzer uses both the light and dark phases of the pulsed UV light source to continuously detect and correct for electronic noise, giving exceptionally stable and sensitive performance. A separate UV detector allows the instrument to continuously correct for variations in lamp intensity. Exceptional stability is achieved with the use of an optical shutter to compensate for PMT drift, and a reference detector to correct for changes in UV lamp intensity. A hydrocarbon "kicker" and advanced optical design combine to prevent inaccuracies due to interferents.

  • Wire Test Unit

    McGan Technology

    The Wire Testing Unit (WTU) is used in conjunction with the MMPD-8K kit or the MM5KV Kit purchased with the optional HV Red Wire and is used to easily test the continuity of electrosurgical cables used to connect the electrosurgical generator either to the active handpiece (e.g. laparoscopic instruments or forceps) or to the return electrode which completes the circuit between the generator and the patient. If the conductor is broken without damage to the cable’s jacket it can remain unseen and could be put into use for the electrosurgical operation causing the system to not properly function. By using the WTU you can test to ensure that the cables have continuity prior to actual usage in the operating room. This does not preclude the other tests that should be performed on these cables such as visually examining the cable for jacket damage including cracks, pinholes and abrasions and manually flexing the cable.

  • QuickBERT-T1 Test Set

    635A - TesCom USA

    The TesCom QuickBERT-T1 test set makes it quick and easy to verify and troubleshoot T1 facilities. Instantly get essential information, including framing type, line coding, BERT pattern, T1 signaling and frame synchronization status, alarm conditions, density violations, and framing loss.  Error conditions are also automatically displayed such as: bipolar violations, frame bit errors, CRC errors (ESF), and bit errors in a received BERT pattern. For long-term testing, history status is provided to indicate intermittent problem conditions. Test results can be printed for further analysis.  The QuickBERT-T1 gives you fast, in-depth test features without time lost in configuring the test or remembering setups and menus. The lightweight, rugged design makes this handheld instrument easy to use in any location. Key features include:

  • Source Measure Unit

    Series 2600B - Tektronix, Inc.

    Keithley’s Series 2600B System SMU instruments are the industry standard current-voltage source and measure solution for highly automated production test applications. Both dual- and single-channel models tightly integrate a precision power supply, true current source, DMM, and electronic load with pulse generating capabilities.

  • Optical Spectrum Analyzers

    Thorlabs, Inc.

    Thorlabs' Optical Spectrum Analyzers (OSAs) perform highly accurate spectral measurements. Compatible with fiber-coupled and free-space light sources, these compact benchtop instruments suit a wide variety of applications, such as analyzing the spectrum of a telecom signal, resolving the Fabry-Perot modes of a gain chip, and identifying gas absorption lines.

  • High-Precision Programmable DC Power Supply

    MPS-3600H Series - Matrix Technology Inc.

    MPS-3600 HSeries is a new generation of high-precision programmable DC power supply. This series of products is equipped with a standard communication interface, which has both desktop and system characteristics. It can be arbitrarily matched with other instruments and integrated into a special function test system to complete the measurement requirements in different occasions.

  • Digital Barometers

    Mensor Corp.

    Barometric pressure instruments measure the ambient atmospheric pressure and are used in manufacturing, process control, aerospace, geoscience, calibration and a host of other applications where  ambient pressure is a factor in the results of tests, adjustments or calibration of components.  Mensor barometric references provide the highest level of accuracy in critical applications.

  • Signal level meter

    ST-200Q - Wuhan Sunma Technologies Co., Ltd.

    A test instrument applicable for the maintenance of CATV (Analog, Digital measurement,TILT)system; 2. Compact, light-weight, easy to carry; 3. With dual-channel measurement display, it is convenient and pragmatic; 4. Able to measure MER, BER Signal Level,Channel Power,V/A,C/N,FM,Trunk Voltage