Filter Results By:

Products

Applications

Manufacturers

Instruments

read precision values.

See Also: Instrument Cables, Instrumentation Amplifiers


Showing recent results 3511 - 3525 of 4259 products found.

  • HDMI Video Generator/Analyzer

    Teledyne LeCroy quantumdata

    The Teledyne LeCroy quantumdata 780BH is a battery-powered, portable test instrument that enables you to conduct quick, on-site verification testing and troubleshooting of your Ultra High Definition HDMI system and analog video displays. The 780BH builds on the 780A but adds a larger—7 inch—color touch display and features a real time status bar providing at-a-glance status for the HDMI Tx and HDMI Rx ports. The 780BH supports testing of HDMI devices up to 300MHz. The 780BH also supports testing of both HDCP 1.4 and 2.2/2.3 on HDMI sources, sinks and repeaters.

  • High Impedance Active Probes

    18C & 19C - Picoprobe

    High impedance probes, PICOPROBE® MODEL 18C and MODEL 19C, combine the most advanced MOS and bipolar technologies with special, low capacitance packaging techniques to achieve truly remarkable electronic measurement capabilities. While being manufactured each instrument is individually optimized for the best possible performance. The extremely low input capacitance, high input impedance, and almost negligible input leakage current permits the direct probing of even the most sensitive MOS dynamic nodes. At the same time, the full dc capability of this Picoprobe coupled with the high speed capability permits the full characterization of circuits.

  • High Speed Data Recorders

    Conduant Corporation

    Conduant’s StreamStor® recording and playback systems overcome bottlenecks common to RAID and other traditional storage and recording environments. Conduant’s sub-systems and board solutions feature:-Recording and playback of digital data at sustained speeds up to 1.6 GB/s.-Capacities over 32 TB in a single system.-Direct hardware-to-hardware recording and playback. (Peer-to-Peer)-Use of a wide variety of commercial off-the-shelf (COTS) data acquisition, data capture and output hardware to -Create the right instrument for your high performance application.-Outstanding reliability and scalability for today’s most demanding applications.

  • Hyperspectral Imaging Sensors

    Headwall Photonics, Inc.

    HYPERSPEC® sensors are line-scanning instruments (sometimes called pushbroom) that collect reflected light through an image slit. One row of spatial pixels is collected per frame as motion occurs, with each pixel containing full spectral data. Motion can be accomplished in two ways: either as an airborne deployment (UAV, aircraft, or satellite) or stationary (where motion is accomplished beneath the sensor, such as a food inspection line). A third option is also available where pan-and-tilt or rotary stages allow a fixed-location sensor to scan a stationary object (such as a piece of artwork, or a mine face for geological applications).

  • Intelligent Power Monitor

    iPM - North Atlantic Industries

    NAI’s iPM is an Intelligent Power Monitor that provides a precise, instrument grade, digital analysis of input power lines. This advanced, DSP-based unit monitors single-phase, 3-phase 4-wire wye, or 3-phase Delta power lines at various input voltage levels and frequencies.The iPM is equipped with an EIA RS485-compatible serial communications interface that permits additional control functions and readout of diagnostic data, and features a Background Built-in-Test (BIT) that constantly monitors the health of unit hardware and software. This power monitor is designed and qualified to the most stringent performance and environmental requirements, and is ideally suited for rugged defense and industrial applications.

  • IR CAMERAS

    IRC800 - Sierra Olympic Technologies Inc.

    The IRC800 Series cameras offer the ultimate in flexibility for research scientists. Camera operators can vary integration times, frame rates and cold filters to meet the most precise testing requirements making the IRC800 the perfect instrument for prototyping system development or where application requirements may change. A 1/3-liter LN2 pour-filled Dewar assembly maintains temperature for up to 20 hours unpowered and 9 hours powered which makes the IRC800 Series perfect for Scientific Imaging, Process Analysis and Quality Assurance. A developer’s kit is available for users who wish to create their own applications.

  • LASAR Post Processor, Run Time And Diagnostic Test Solution

    DtifEasy Series - Marvin Test Solutions, Inc.

    DtifEasy is a full-featured tool set for importing, converting, and executing IEEE-1445 compliant digital test vectors generated by a LASAR simulation. All four IEEE-1445 file types - UUT model group, Stimulus and Response group, Fault Dictionary group, and Probe group are supported by DtifEasy; providing the user with the ability to execute go/no-go, fault dictionary, and guided probe sequences. DtifEasy supports MTS' 3U PXI GX529x series of dynamic digital instrumentation to 200 MHZ as well as the 6U PXI GX5960, 50 MHz digital instrumentation. All of these instrument families are compatible with the digital logic probe.

  • Lock-in Amplifier

    MFLI - Zurich Instruments AG

    The Zurich Instruments MFLI is a digital lock-in amplifier that sets the new standard for measurements in the medium and low frequency range. The MFLI is available in two versions covering the frequency range DC to 500 kHz and DC to 5 MHz (an upgrade from 500 kHz to 5 MHz is possible later). With the carefully developed analog and digital front ends in combination with the merits of fast digital processing provided by the on board FPGA, the MFLI combines superior performance with the outstanding LabOne toolset. The embedded data and web servers allow straightforward connection to any device running a web browser.

  • Mini OTDR

    OT-8700 - Radiantech, Inc.

    FiberPal OT-8700 series instruments, with power meter built-in, are new miniature, high performance optical time domain reflectometer which is designed as fiber troubleshooter for locating fiber connector, break and imperfections for access networks. It detects event locations along the optical fiber and displays the results on a 7” color LCD display. FiberPal OT-8700 series are light, reliable and easy to use, hence it is ideal for FTTX testing. The Application Software equipped is used for data analysis, processing and storage. With the USB Interface port, enabling FiberPal OT-8700 series to transfer test data to computer easily.

  • Modem-On-Hold Tester

    3520 - Rochelle Communications, Inc.

    The Rochelle Model 3520 Modem-On-Hold Tester is a stand-alone instrument for development and testing of V.92 Modems and Integrated Access Devices. The Model 3520 features user-friendly software that allows the user to set CO line parameters, ringing voltage and frequency, and signal levels. The Model 3520 includes selectable 6, 9, and 15Kft artificial lines (26 AWG). Secondary CO line permits end-to-end voice path between two client modems. Pass-Through Mode places the CO-line simulator in series between a client modem and other testers or an external POTS line

  • Palm Size Digital Multimeter, Calibrated, 1999 Count, Mean Value, Manual Range, 3.5 Digit

    72-7770 CAL D - Tenma

    The 72-7770 CAL D from Tenma is a palm sized digital multimeter with 3 3/4 digit LCD. It is 3 1/2digits with steady operations, fashionable design and highly reliable hand held measuring instrument. The meter measures AC/DC voltage, AC/DC current, resistance, temperature, diode and continuity. It is an ideal tool for maintenance. The multimeter features square wave output, data hold, low battery indicator and display backlight, This meter complies with the standards CE, IEC61010, in pollution degree 2, overvoltage category (CAT I 600V, CAT II 300V) and double insulation.

  • Palm Size Digital Multimeter, Calibrated, 1999 Count, Mean Value, Manual Range, 3.5 Digit

    72-7770 CAL DU - Tenma

    The 72-7770 CAL DU from Tenma is a palm sized digital multimeter with 3 3/4 digit LCD. It is 3 1/2digits with steady operations, fashionable design and highly reliable hand held measuring instrument. The meter measures AC/DC voltage, AC/DC current, resistance, temperature, diode and continuity. It is an ideal tool for maintenance. The multimeter features square wave output, data hold, low battery indicator and display backlight, This meter complies with the standards CE, IEC61010, in pollution degree 2, overvoltage category (CAT I 600V, CAT II 300V) and double insulation.

  • Phase Indicators

    Kyoritsu Electrical Instruments Works, Ltd.

    New technology permits safe testing, without the need of direct contact between probes and live wires. The insulated crocodile clips can clip insulated cables from 2.4 to 30mm. Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones. The instrument can be fixed to a metal panel via the magnet on the back side. Wide measuring range for 3 phase installations from 70V to 1000V AC. Super brightness function permits clear LED''''s indication also in sunshine. Complies with IEC 61010-1 CAT IV 600V and CAT III 1000V.

  • Phase Noise Testers

    7000 Series - Berkeley Nucleonics Corporation

    The 7000 series is an integrated solution that offers an indispensable set of measurement functions for evaluating VHF to microwave frequency signal sources such as crystal oscillators, PLL synthesizers, clocks, phase-locked or free-running VCO's, DROs, SAW, or Yig oscillators, and others. The flexible instrument comprises a two-channel, cross-correlation system with two internal, tunable references sources that also allows measurements with externally sourced references. We offer three platform options for the 7000 Series Phase Noise Testers: the 7070 5 MHz-to-7 GHz, the 7300 5 MHz-to-26 GHz, and the 7340 from 5 MHz-to-40 GHz.

  • Portable Oil-in-Water Analyzer

    DT250 - Mirmorax AS

    The portable instrument, based on Mirmorax’s third generation ultrasonic technology, provides efficient, flexible and highly accurate sample analysis as well as live measurements of oil and solids in produced water. For operators, this will lead to improved monitoring capabilities and the flexibility to de-bottle neck various parts of the processing system. This will bring new value and optimization possibilities to existing separators and filters, enable targeted use of chemicals, and ensure the meeting of all environmental requirements. The Desktop Oil-in-Water Analyzer will also be particularly suited to challenging fields that host separation from different tie-backs with various oil types in the same produced water.