Showing results: 1456 - 1470 of 2677 items found.
-
cPCI-7248/7249R -
ADLINK Technology Inc.
*PICMG 2.0 Rev 2.1*48-CH digital TTL/DTL input/output*Emulates 4/2/1 industry standard 8255 PPI (mode 0)*Direct interface with OPTO-22 compatible I/O modules Output port status read back*On board 8254 timer/counter chip
-
XMC-FPD-xxx -
ALPHI Technology Corporation
XMC Bus VITA 42• 3.3V I/O, 5V tolerant businterfaces• Local Bus Clock rates at66MHz• Compliant PCIeSpecification, r1.0a x1• Direct slave data transfers• DMA Capability• Up to 160Mb/s Transfer• DMA Transfer per Fifo Level
-
196762-01 -
NI
The TB-2636 provides the necessary routing to configure the PXI-2529 PXI Matrix Switch Module as a 2-wire 4×32 matrix. You can directly connect the TB-2636 to the front panel I/O connectors of the PXI-2529. The TB-2636 includes screw terminals that provide access to the rows and columns of the matrix.
-
MVME8100 -
ELMA Electronic, Inc.
High performance 6U VME/VXS SBC with NXP QorIQ P5020 processor offers expanded IO and memory with PCIe and SRIO and multiple USB, Serial and Ethernet ports. Memory up to 8GB DDR3, 512KB FRAM non-volatile memory, 8GB eMMC NAND Flash.
-
VR E7x/msd -
ELMA Electronic, Inc.
VR E7x/msd is a 6U VPX™ processor board based on a 6-core Intel® Xeon® processor E-2176M (formerly known as Coffee Lake-H) and includes a wide variety of built-in I/O making it suitable for use in defense, industrial, scientific and aerospace markets
-
MVME8105 -
ELMA Electronic, Inc.
The SMART Embedded Computing MVME8105 is a high performance 6U VME SBC with the NXP® QorIQ® P5020 2.0 GHz processor and high speed DDR3-1333 MHz with ECC. It offers expanded IO and memory features with multiple USB, Serial and Ethernet ports.
-
PMC-E2001 -
Curtiss-Wright Defense Solutions
The PMC-E2001 keeps low speed, high quality analog IO simple and takes care of ruggedization for youThe PMC-E2001 combines analog input and output channels and is an application-ready module engineered to perform precise using sigma-delta devices for waveform generation and reconstruction for audio and acoustic applications.
-
2628 -
Technobox, Inc.
The Multifunction RS422/RS485/Digital I/O board provides a collection of various interfaces on a single-wide PMC module. The two 16550 UARTs on the board provide asynchronous communication at bit rates to 115Kbaud. The 16550?s are mapped into host processor space so that standard drivers can be used with the board.
-
Teledyne Advanced Pollution Instrumentation
NumaView™ Software provides sophisticated triggers for initiating data logging, including periodic and conditional. The data can be viewed directly on the display over a selected period of time. Results also can be downloaded onto a USB flash drive or via standard T Series I/O ports.
-
Diamond Systems Corp
Diamond's line of rugged, wide-temperature Communications Modules feature standard and optoisolated RS-232/422/485 serial interfaces, Ethernet, CAN bus, GPS, and digital I/O functions. We have modules available in the following form factors: PC/104, PC/104-Plus, EMX and PCIe MiniCard.
-
APCI-3001-8-LAC -
TEAM SOLUTIONS, INC.
LACQUERED 8 single-ended or 4 differential inputs 12-bit resolution Optical isolation 500 V 100 kHz data transfer rate Automatic analog acquisition 8 digital I/O, 24 V, isolated, timer Trigger functions Graphical display of the measured data
-
AIO8 -
Acces I/O Products, Inc.
AIO8 is an economical multifunction, moderate-speed, multiplexed analog-to-digital converter card with digital I/O and with counter/timers. It can be used with ISA-bus computers. The card is 7" long and requires one slot in the computer. All external connections are made through a standard 37-pin D-type connector at the rear of the computer.
-
Virginia Panel Corporation
The iDock Series is a series of connectors ideal for use with automatic machine handlers in production testing. Their floating bushings allow up to .04" of re-alignment. Use them with a mix of I/O modules and use up to 5,952 signal contacts simultaneously. The iDock series is rated at 100,000 cycles.
-
Virginia Panel Corporation
The iDock Series is a series of connectors ideal for use with automatic machine handlers in production testing. Their floating bushings allow up to .04" of re-alignment. Use them with a mix of I/O modules and use up to 5,952 signal contacts simultaneously. The iDock series is rated at 100,000 cycles.
-
VPX3-1707 -
Curtiss-Wright Defense Solutions
Maximize performance in SWaP-constrained environments with the VPX3-1707, a powerful 3U OpenVPX single board computer designed to bring Arm’s unparalleled performance per watt to rugged, embedded systems. With advanced security capabilities and flexible I/O interfaces, the VPX3-1707 is a next-generation innovation for today’s C5ISR applications.